Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: remington double and laser help

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles

Birdhunter50
.375 member

Reged: 03/06/07
Posts: 815
Loc: Iowa,U.S.A.

Re: remington double and laser help
10/07/08 01:57 AM

I wish you all the luck in the world with your project, but I have tried the laser trick in the muzzles and it didn't help out much. I know that putting a laser in at the breech end will tell you nothing, the barrels are bent slightly when the gun is built, (not enough to affect reloading though), and because of recoil and the twisting of the barrels around their center of mass when each is fired, the bullets won't go where the lasers point. To even get the points of impact close, the lasers would have to be lower than POI and crossed to each other to get the POI's close together.
How much? That's the golden question.

There are numerous things that affect regulation, recoil, elapsed time of the bullet while still in the barrel, gun weight, bullet weight, barrel configuration, wheather it's an OU or SXS, and MOON PHASE. Just joking on the last one, but after you have done a few of these, you would just about swear that anything can affect the regulating of a double, and you wouldn't be far off!

Here's a valuable hint if you will: If it is a side by side, adjust the barrels to shoot at the same height first, then adjust the in and out on the same horizontal plane. If it is and over and under, adjust the right and left adjustments first, then get them converging together up and down last. In other words, do the spread between barrels or convergence last. You will have to make several adjustments anyway, and some times they won't all fall into this rule, but as a general rule, this works out best. Bob H.

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
remington double and laser help	bwananelson	01/07/08 09:05 AM
Re: remington double and laser help	Birdhunter50	10/07/08 01:57 AM
Re: remington double and laser help	Marrakai	10/07/08 12:56 PM
Re: remington double and laser help	450_366	02/07/08 07:03 AM
Re: remington double and laser help	bwananelson	02/07/08 09:21 AM
Re: remington double and laser help	450_366	03/07/08 12:25 AM
Re: remington double and laser help	tarawa	03/07/08 03:50 AM
Re: remington double and laser help	450_366	03/07/08 05:21 AM
Re: remington double and laser help	bwananelson	03/07/08 07:59 AM
Re: remington double and laser help	450_366	04/07/08 09:02 AM
Re: remington double and laser help	Omnivorous_Bob	04/07/08 10:46 AM
Re: remington double and laser help	Paul	09/07/08 02:42 PM
Re: remington double and laser help	tinker	09/07/08 03:13 PM
Re: remington double and laser help	xsheadspace	09/07/08 10:26 PM
Re: remington double and laser help	tarawa	03/07/08 09:33 PM
Re: remington double and laser help	CptCurl	01/07/08 10:56 AM
Re: remington double and laser help	DUGABOY1	08/07/08 11:15 PM

Extra information

0 registered and 83 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2832

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved