Home | Ezine | Forums | Links | Contact
NitroExpress.com: Can anyone recommend a DR conversion gunsmith?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

Charles
.275 member


Reged: 13/12/07
Posts: 55
Loc: Texas
Re: Can anyone recommend a DR conversion gunsmith?
      20/05/08 11:35 AM

It is a 45/90 on a Francotte with a Greener crossbolt.He has the liners ready and I need to get some 45/90 cases ordered. I am looking for some loads with a 400 grain bullet that will not have too much pressure. Daryl recomended that I start with 45/70 loads and go up. The only loading manual I have that shows pressure is the Lee Manual. There is a 28000psi load that develpos 1926 fps with a 400 grain. I would like to have more horse power than that but have not found pressure specs. When Richard Stallcup get the gun regulated, a new pad put on and the checkering recut on the fore end I will post pictures. If any of you guys are thinking about this, he would be a good man to talk to...reasonable prices also.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Can anyone recommend a DR conversion gunsmith? Jeremy 19/05/08 06:32 AM
. * * Re: Can anyone recommend a DR conversion gunsmith? Charles   19/05/08 07:08 AM
. * * Re: Can anyone recommend a DR conversion gunsmith? Jeremy   19/05/08 09:42 AM
. * * Re: Can anyone recommend a DR conversion gunsmith? Charles   19/05/08 11:16 AM
. * * Re: Can anyone recommend a DR conversion gunsmith? Jeremy   20/05/08 06:57 AM
. * * Re: Can anyone recommend a DR conversion gunsmith? Charles   20/05/08 11:35 AM
. * * Re: Can anyone recommend a DR conversion gunsmith? Jeremy   20/05/08 11:08 PM

Extra information
0 registered and 6 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 1175

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved