Home | Ezine | Forums | Links | Contact
NitroExpress.com: Barrels crossing?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing

Marrakai
.416 member


Reged: 09/01/03
Posts: 3494
Loc: Darwin, Top End of Australia
Re: Barrels crossing?
      18/05/08 08:06 PM

The point most people miss is that the barrels do not converge 'straight'.

The breech-ends of the barrels must be parallel, so that the chambers will be perpendicular to the breech-face. At some point forward of the chambers (usually forward of the forend loop), the barrels are bowed inwards slightly. The amount of convergence required for regulation depends on only the last inch of each barrel.

Placing a laser bore-sighter in the chambers tells you nothing. Placing them in the muzzles might give you some idea.

But remember, each pair of barrels on different rifles will be bowed together in a different curve, which is why the industry has used 'trial and error' regulation for over a century, rather than the impossible empirical solution you are seeking here.

Regulating a DR is usually a challenge, often frustrating, but always immensly satisfying. Just do it!


And BTW, I do have Ellis Brown's little 'Rule of Thumb' card sitting on my bookshelf...

...as a conversation piece!

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Barrels crossing? 450_366 06/05/08 06:22 AM
. * * Re: Barrels crossing? Judson   15/05/08 07:13 AM
. * * Re: Barrels crossing? 450_366   15/05/08 07:35 AM
. * * Re: Barrels crossing? beleg2   15/05/08 08:52 AM
. * * Re: Barrels crossing? RSFknives   16/05/08 01:24 AM
. * * Re: Barrels crossing? dale   16/05/08 02:28 PM
. * * Re: Barrels crossing? 450_366   17/05/08 05:20 AM
. * * Re: Barrels crossing? RSFknives   17/05/08 09:09 PM
. * * Re: Barrels crossing? 450_366   18/05/08 06:04 AM
. * * Re: Barrels crossing? sakmyk   18/05/08 06:53 AM
. * * Re: Barrels crossing? Bramble   18/05/08 09:53 AM
. * * Re: Barrels crossing? RSFknives   18/05/08 11:05 AM
. * * Re: Barrels crossing? sakmyk   18/05/08 06:08 PM
. * * Re: Barrels crossing? Marrakai   18/05/08 08:06 PM
. * * Re: Barrels crossing? 450_366   19/05/08 07:46 AM
. * * Re: Barrels crossing? Marrakai   19/05/08 01:38 PM
. * * Re: Barrels crossing? 450_366   19/05/08 05:21 PM
. * * Re: Barrels crossing? DUGABOY1   22/05/08 03:22 AM
. * * Re: Barrels crossing? 450_366   22/05/08 08:03 AM
. * * Re: Barrels crossing? DUGABOY1   22/05/08 11:19 AM
. * * Re: Barrels crossing? 450_366   22/05/08 03:20 PM
. * * Re: Barrels crossing? 4seventy   22/05/08 07:06 PM
. * * Re: Barrels crossing? 450_366   23/05/08 12:28 AM
. * * Re: Barrels crossing? DUGABOY1   23/05/08 01:06 AM
. * * Re: Barrels crossing? 450_366   23/05/08 07:53 AM
. * * Re: Barrels crossing? dale   22/05/08 05:24 PM
. * * Re: Barrels crossing? oupa   22/05/08 05:40 AM
. * * Re: Barrels crossing? sakmyk   19/05/08 04:16 PM
. * * Re: Barrels crossing? dale   19/05/08 05:09 PM
. * * Re: Barrels crossing? sakmyk   18/05/08 10:14 PM

Extra information
0 registered and 5 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 1506

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved