Home | Ezine | Forums | Links | Contact
NitroExpress.com: Huglu Action for conversion?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing

BlainSmipy
.375 member


Reged: 24/11/05
Posts: 558
Loc: Washington, USA
Re: Huglu Action for conversion?
      16/04/08 04:52 AM

Quote:

I am afraid that I cannot add anything as Huglu did not reply to my e-mail.

I don't think that anybody is going to recommend one way or the other for the obvious litigious reasons.
I am afraid that all you can do is take what people have said and make your own judgment.

The only action that I am in a position to assert will hold up is the one that I have used myself.
That is a 3 1/2" magnum 12 Bore Zabala. I would strongly suggest that you disable its rear trigger first double discharge feature :-)
They also make a 10 gauge and it is the same action as AYA market/ed as the Matador 10 gauge.

Regards




Huglu has built a test 470NE on one of their 16 gauge actions as per the importer to test viability. The gun was shot hundreds of times at full nitro and proved at 30% above full load. No issues. This info is per the importer, again. Talking to the smiths at Huglu..through the importer who speaks Turkish...the steel is C1040 Mild carbon, heat treated to a BN of 47. I have had two frames tested to confirm this. I then had a frame Aux-Treated to toughen it even more. I then proved this frame at 458 Lott pressures with no issues.

What issues could you have? Primers extruding with possible piercing back into the frame through the firing pin holes which are not bushed. So basically without bushed firing pins you are limited to pressures that the primers can take. I regulate to 10tons max, not because of the strength of the action, but because of the strength/safety margin of the primers. If you want to take the time and have the skill, you could bush the pins, a very difficult and costly undertaking. This is all on box-lock actions. With hammer guns, the pins are bushed by design, and should not present any of these issues if they are of the positive lock back screw-in type. The type that have just a retaining screw may not have the strength to hold the pressure if a primer rupture were to happen.

BTW, my ten ton load is good for 4500FPE in a 450NE (or 45-120 Sharps) as per GW loads.

BS-

--------------------
You horde gold, I horde lead.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Huglu Action for conversion? 375RugerNo1 27/12/07 10:50 PM
. * * Re: Huglu Action for conversion? wanna577   24/02/08 04:33 AM
. * * Re: Huglu Action for conversion? Judson   26/02/08 09:26 AM
. * * Re: Huglu Action for conversion? 450_366   02/03/08 01:54 AM
. * * Re: Huglu Action for conversion? penwolf   06/03/08 10:32 AM
. * * Re: Huglu Action for conversion? Bramble   06/03/08 11:39 AM
. * * Re: Huglu Action for conversion? BlainSmipy   16/04/08 04:52 AM
. * * Re: Huglu Action for conversion? Bramble   16/04/08 06:04 AM
. * * Re: Huglu Action for conversion? BlainSmipy   16/04/08 06:37 AM
. * * Re: Huglu Action for conversion? Bramble   16/04/08 10:25 AM
. * * Re: Huglu Action for conversion? BlainSmipy   16/04/08 01:36 PM
. * * Re: Huglu Action for conversion? Bramble   17/04/08 01:47 AM
. * * Re: Huglu Action for conversion? AkMike   28/12/07 01:54 AM
. * * Re: Huglu Action for conversion? 375RugerNo1   28/12/07 02:44 AM
. * * Re: Huglu Action for conversion? 375RugerNo1   28/12/07 08:42 AM
. * * Re: Huglu Action for conversion? peter   28/12/07 10:04 AM
. * * Re: Huglu Action for conversion? 400NitroExpress   31/12/07 03:29 PM
. * * Re: Huglu Action for conversion? hoppdoc   31/12/07 03:39 PM
. * * Re: Huglu Action for conversion? Bramble   01/01/08 04:33 AM
. * * Re: Huglu Action for conversion? 9.3x57   06/03/08 12:03 PM
. * * Re: Huglu Action for conversion? Bramble   06/03/08 07:12 PM
. * * Re: Huglu Action for conversion? 9.3x57   07/03/08 01:35 AM
. * * Re: Huglu Action for conversion? buckbrush   01/01/08 12:40 PM
. * * Re: Huglu Action for conversion? akjeff   01/01/08 01:33 PM
. * * Re: Huglu Action for conversion? 375RugerNo1   01/01/08 06:12 PM
. * * Re: Huglu Action for conversion? Marrakai   03/01/08 11:29 AM
. * * Re: Huglu Action for conversion? Bramble   03/01/08 12:30 PM

Extra information
0 registered and 22 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2169

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved