Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: M 98 bases rings wanted tto source

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

Nakihunter
.375 member

Reged: 13/10/07
Posts: 588
Loc: New Zealand

Re: M 98 bases rings wanted tto source
08/04/08 08:21 AM

Gryphon

In my limited experience, I do not worry about closing the gap between the rings. The most important issue is that the scope does not move in the ring even if you are using a big caliber with heavy recoil. Tightening the rings too much & seizing the power ring is obviously not desirable.

I have used shims in the bottom to clear a low ring set on a BLR 358 Win (good recoil). I just cut out an old credit card & sanded the surfaces to make it rough. You can actually buy shim paper that is designed for scope shims (I do not know where you get them.)

I would also change the screws to Allen key type or the Leupold star key type & make sure that I do not over tighten the rings. That might just solve your problem without having to change your bases & rings.

I have the Australian Hilver bases & rings on my Simson 9.3X62 & they work fine. I understand that Lynx & Tasco are the same as the Hilver.

Good luck & good hunting.

--------------------
Always shoot through the target & not just at it.

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
M 98 bases rings wanted tto source	gryphon	08/04/08 06:42 AM
Re: M 98 bases rings wanted tto source	weedypigeon	09/04/08 12:41 PM
Re: M 98 bases rings wanted tto source	Nakihunter	09/04/08 01:35 PM
Re: M 98 bases rings wanted tto source	ozhunter	09/04/08 05:00 PM
Re: M 98 bases rings wanted tto source	gryphon	10/04/08 07:12 AM
Re: M 98 bases rings wanted tto source	dirtyjim	18/04/08 08:03 AM
Re: M 98 bases rings wanted tto source	gryphon	18/04/08 12:00 PM
Re: M 98 bases rings wanted tto source	bpesteve	19/04/08 01:53 AM
Re: M 98 bases rings wanted tto source	Nakihunter	19/04/08 12:47 PM
Re: M 98 bases rings wanted tto source	dirtyjim	21/04/08 05:31 AM
Re: M 98 bases rings wanted tto source	bpesteve	22/04/08 12:05 AM
Re: M 98 bases rings wanted tto source	CHAPUISARMES	08/04/08 07:52 AM
Re: M 98 bases rings wanted tto source	Nakihunter	08/04/08 08:21 AM
Re: M 98 bases rings wanted tto source	gryphon	08/04/08 04:57 PM
Re: M 98 bases rings wanted tto source	zimhunter	09/04/08 12:35 AM
Re: M 98 bases rings wanted tto source	gryphon	09/04/08 06:21 AM
Re: M 98 bases rings wanted tto source	bpesteve	09/04/08 11:06 AM
Re: M 98 bases rings wanted tto source	gryphon	09/04/08 10:37 AM

Extra information

0 registered and 61 anonymous users are browsing this forum.

Moderator: NitroX

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 13963

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved