Home | Ezine | Forums | Links | Contact
NitroExpress.com: Husqvarna in 6.5x55 M96 or M98 or 1600?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

DarylS
.700 member


Reged: 10/08/05
Posts: 27157
Loc: Beautiful British Columbia, Ca...
Re: Husqvarna in 6.5x55 M96 or M98 or 1600?
      04/04/08 12:22 AM

Some of those tradeex 6.5's are really nice. Seems like hundreds of them. Just thought I'd rub that in a bit, Rod.
: If you want to beat 3,000fps with 120gr. bulelts, then pay the extra bucks and get a 98.
: If 2,900fps is OK with 120's and even 129's then an excellent condition 96 will do it. Mine does, but it's a brand new barreled action made in 1912. Now, mine's a military rifle - may have different heat treating than the Husky's I don't know. That being the case, perhaps you should stay with the 98.
; 6,5x55 standard ballistics will push 140's out at 2,650fps, 2,800fps with 120's, I'd expect and 2,500fps with 160's, which, by the way, is a really good Moose, Elk and Deer load, not to mention black bear.
; I load 160gr. Hornady's to 2,500fps in my 6.5x55, with low pressure using RE#22 and H450. Reloader #19 is used for the other loads, which allows improved ballistics at identical maximum normal pressures compared to the faster powders that are more commonly used in this round, ie: 4064, 4320, 4895, etc. The case capacity of the 6.5x55 works well with the slower powders noted.
; If you don't load, the Hornady Light Magnum ammo is loaded for the weaker actions, but give improved ballistics over other ammo makers providings.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Husqvarna in 6.5x55 M96 or M98 or 1600? Woodbeef 03/04/08 11:00 PM
. * * Re: Husqvarna in 6.5x55 M96 or M98 or 1600? 9.3x57   03/04/08 11:41 PM
. * * Re: Husqvarna in 6.5x55 M96 or M98 or 1600? Woodbeef   04/04/08 12:57 AM
. * * Re: Husqvarna in 6.5x55 M96 or M98 or 1600? Woodbeef   04/04/08 03:07 AM
. * * Re: Husqvarna in 6.5x55 M96 or M98 or 1600? DarylS   04/04/08 12:22 AM

Extra information
0 registered and 693 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 5018

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved