Home | Ezine | Forums | Links | Contact
NitroExpress.com: Vintage Black Powder Drilling

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

DarylS
.700 member


Reged: 10/08/05
Posts: 27014
Loc: Beautiful British Columbia, Ca...
Re: Vintage Black Powder Drilling
      02/04/08 10:47 AM

I didn't think the 8x57mm was ever was in BP. Point well taken about the larger bulelrts probably being too large for the chamber's neck diameter. My 9.3 x57 is just that way. It has an oversize groove diameter, a full .370". That largest bullet I can use are the swaged .375" Hornady's down to .367". Normal factory bulelts in 9.3 are .3650" to .366" depending on make (of those I measured).
: I have a 16 bore hammer double Husky w/ 2 1/2" chambers coming in the mail - probably be sent tomorrow. Right tube is straight rifled and the gun has a rear sight. I'm anxiously awaiting it's arrival.
ps- already have a 16 bore ball mould - HA!

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Vintage Black Powder Drilling kcordell 01/04/08 03:16 PM
. * * Re: Vintage Black Powder Drilling 88MauSporter   02/04/08 01:11 AM
. * * Re: Vintage Black Powder Drilling kcordell   02/04/08 02:40 PM
. * * Re: Vintage Black Powder Drilling DarylS   03/04/08 01:35 AM
. * * Re: Vintage Black Powder Drilling DarylS   02/04/08 07:11 AM
. * * Re: Vintage Black Powder Drilling 88MauSporter   02/04/08 07:34 AM
. * * Re: Vintage Black Powder Drilling DarylS   02/04/08 10:47 AM

Extra information
0 registered and 113 anonymous users are browsing this forum.

Moderator:  Huvius 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3004

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved