Home | Ezine | Forums | Links | Contact
NitroExpress.com: What to do?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

4seventy
Sponsor


Reged: 07/05/03
Posts: 2210
Loc: Queensland Australia
Re: What to do?
      25/02/04 10:22 AM

Just an opinion, but I wouldn't want the sight screwed to the action at one end of its base and to the stock at the other end.
Those type sights are quite high and if bumped or knocked can apply a fair amount of leverage to their base so I would want it attached as strong as possible.
If it was my rifle I think I'd be fitting a tang to the rear of the action so that the sight base is held by two screws which fit into threaded holes in the tang.
The tang would need to be a permanent part of the action and therefore may require fitting by welding and would also need to be secured to the stock with a woodscrew at its rearend.

It's my opinion that sights of any kind need to be mounted as solidly as possible and especially so with tall adjustable peeps like the one in your photo.

So yeah, as you say, add tang and drill/tap both ends would be best IMO.
Great project by the way.
Best of luck and please keep us all informed as you progress.


Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* What to do? Pedestal 25/02/04 09:49 AM
. * * Re: What to do? 4seventy   25/02/04 10:32 AM
. * * Re: What to do? Pedestal   25/02/04 10:31 PM
. * * Re: What to do? NitroXAdministrator   25/02/04 10:44 AM
. * * Re: What to do? 4seventy   25/02/04 10:22 AM
. * * Re: What to do? 475Guy   25/02/04 10:16 AM

Extra information
1 registered and 49 anonymous users are browsing this forum.

Moderator:  Huvius 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2330

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved