Home | Ezine | Forums | Links | Contact
NitroExpress.com: lever release floor plate

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
Squarebridge
.300 member


Reged: 21/08/08
Posts: 129
Loc: Tennessee
lever release floor plate
      #285387 - 17/07/16 12:05 PM

Is the Mauser lever release floor plate a modification you can make to any of the regular military push-button style release plates? Or does it require its own bottom metal? I'm considering picking up a Husqvarna M46 with a terrible bore and a nice stock and action that I'm thinking of doing some extensive rework on.

Thanks

Post Extras: Print Post   Remind Me!   Notify Moderator  
metal
.275 member


Reged: 30/04/13
Posts: 69
Loc: Australia
Re: lever release floor plate [Re: Squarebridge]
      #285388 - 17/07/16 12:29 PM

SB, yes it can be done. I think there is someone selling a kit for it somewhere.
When I did one I made all the bits and I built the rear of the floorplate up with weld to make it level through to the rear of the plate, you'll notice how it drops away.
Regards,
Metal.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Jim_C
.300 member


Reged: 09/08/14
Posts: 174
Loc: USA
Re: lever release floor plate [Re: metal]
      #285415 - 18/07/16 05:43 AM

Jim Carmichael's gunsmithing book ("Do It Yourself Gunsmithing") shows one way to do this. It isn't terribly complicated, once you see how it is done. I've used the same general approach to convert floorplates on Mausers and Springfields.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Squarebridge
.300 member


Reged: 21/08/08
Posts: 129
Loc: Tennessee
Re: lever release floor plate [Re: Jim_C]
      #285416 - 18/07/16 05:59 AM

Thanks guys. I know Brownell's sell the lever, etc, but I didn't know if it was enough.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
0 registered and 606 anonymous users are browsing this forum.

Moderator:  NitroX 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2393

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved