Home | Ezine | Forums | Links | Contact
NitroExpress.com: Ruger No 1 custom safety mods...

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

Pages: 1
TilleyMan
.333 member


Reged: 23/08/05
Posts: 272
Loc: Melbourne, Australia
Ruger No 1 custom safety mods...
      #236624 - 12/10/13 08:05 PM

Just back from another 5 week stint in China...

In the meantime Tony Small from Nickal Traditional Gunsmithing has been busy modifying the safeties on my two Ruger No 1's in .450/400 NE 3" and .303 British.

He also modified both triggers to a light crisp release.

I wanted the final safety to be low profile and have a similar appearance to the timeless elegance of those on fine British shotguns and double rifles.

The empties now ping halfway across the room rather than have the rims catch up on the original poorly resolved Ruger factory safety.

I think you will agree he has done an outstanding job... Tony is a superb craftsman, highly recommended for custom gunsmithing!











Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 3954
Loc: Nth QLD Australia
Re: Ruger No 1 custom safety mods... [Re: TilleyMan]
      #236642 - 13/10/13 10:05 AM

Tilleyman, is this a major job (milling to action)or just a replacement part?
I had my safety top redone a little on my No1 so the cases wouldn't keeping hitting it - definitely a fancy mod to the original safety which looks like just an after thought!
93x64mm


Post Extras: Print Post   Remind Me!   Notify Moderator  
TilleyMan
.333 member


Reged: 23/08/05
Posts: 272
Loc: Melbourne, Australia
Re: Ruger No 1 custom safety mods... [Re: 93x64mm]
      #236643 - 13/10/13 10:18 AM

It is a relatively major mod... a 8mm recess is milled in the top strap and a custom safety catch made up which sits much lower and more integrated than the original Ruger one.

Post Extras: Print Post   Remind Me!   Notify Moderator  
TilleyMan
.333 member


Reged: 23/08/05
Posts: 272
Loc: Melbourne, Australia
Re: Ruger No 1 custom safety mods... [Re: TilleyMan]
      #236690 - 15/10/13 08:06 AM


Just measured 10 trigger pulls on a Lyman digital gauge...

.450/400 median weight is 3.5lb

.303 median weight is 2.7lb

Just the way you'd want it


Post Extras: Print Post   Remind Me!   Notify Moderator  
crkennedy1
.375 member


Reged: 05/12/08
Posts: 501
Loc: Utah
Re: Ruger No 1 custom safety mods... [Re: TilleyMan]
      #237940 - 18/11/13 05:40 AM

This custom modification to the No. 1 safety looks really good. I am wondering if there are any gunsmiths here in the Western US that can do as good of a job, I'd certainly be interested in speaking with them.

--------------------
DOUBLE or NOTHING


Post Extras: Print Post   Remind Me!   Notify Moderator  
Englishman
.275 member


Reged: 09/12/09
Posts: 62
Loc: Lot,France
Re: Ruger No 1 custom safety mods... [Re: crkennedy1]
      #238145 - 21/11/13 07:44 PM

My goodness, is that a standard Ruger finish on the inside of the action? It looks like a drainhole cover! No doubt it works though.

Post Extras: Print Post   Remind Me!   Notify Moderator  
gryphon
.450 member


Reged: 01/01/03
Posts: 5487
Loc: Sambar ground/Victoria/Austral...
Re: Ruger No 1 custom safety mods... [Re: Englishman]
      #238150 - 21/11/13 08:49 PM

Quote:

My goodness, is that a standard Ruger finish on the inside of the action? It looks like a drainhole cover! No doubt it works though.




I was surprised and thought that too.

--------------------
Get off the chair away from the desk and get out in the bush and enjoy life.


Post Extras: Print Post   Remind Me!   Notify Moderator  
chuckT
.275 member


Reged: 11/07/11
Posts: 71
Loc: texas usa
Re: Ruger No 1 custom safety mods... [Re: gryphon]
      #238197 - 22/11/13 12:33 PM

TilleyMan, Great looking modifications to the safeties. One of these days I'll get around to having the safeties reworked on my #1's. Personally I think the factory design safety was on purpose. Ruger would rather not be sued if someone got popped in the eye by a cartridge. Englishman and Gryphon; your right the insides are pretty rough. Keep in mind the action is investment cast and they only smooth/clean up what is necessary for correct function of the rifle. Maybe not as pretty inside as a Holland & Holland but a darn sight less expensive and you don't see the rough when the stocks bolted on.

Post Extras: Print Post   Remind Me!   Notify Moderator  
AkMike
.416 member


Reged: 19/11/05
Posts: 2576
Loc: Anchorage, Alaska
Re: Ruger No 1 custom safety mods... [Re: crkennedy1]
      #238198 - 22/11/13 12:59 PM

Quote:

This custom modification to the No. 1 safety looks really good. I am wondering if there are any gunsmiths here in the Western US that can do as good of a job, I'd certainly be interested in speaking with them.




Check in with Dirk Schimmel up in Wyoming. He was Searcy shop foreman when he was in S.D. He's worked on some of mine and the craftsmanship is top notch!

--------------------
"When you see that in order to produce, you need to obtain permission from men who produce nothing; when you see that money is flowing to those who deal not in goods, but in favors; you may know that your society is doomed." Ayn Rand


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 158 anonymous users are browsing this forum.

Moderator:  Huvius 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 8609

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved