Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Ruger #1 accuracy.

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

Pages: 1

FRJ
.224 member

Reged: 09/01/12
Posts: 15
Loc: Washington (wet side)

Ruger #1 accuracy.
#200648 - 26/01/12 11:06 AM

I'm a new member here but a long time shooter and hunter. About 35 years ago I bought a #1 in 3oo win mag. I took several deer and coyotes with it but it never shot as good as I thought it should.
It's been preety much a safe queen for most of its life. About a year ago I installed a Hicks device hoping that it would straighten out my flyer problem. No help!!!! So it sat again. Then I asked on another forum about the problem and a fellow on that site suggested that I make sure the 1/4 rib not touch the reciever. It was most definately touching so I took it off and filed an .080" gap between the rib and the reciever. WOW!!!! This rifle with the first load thru it and 160 gr bullets shot a .462" 5 shot group!!! Next load with 180 gr bullets shot a .602 group!! Now its time to work on loads and getting the Hicks device tuned up. Now I have a rifle that I can vaporize grey diggers at long range with and hunt my favorite Roosevelt elk also. FRJ

Post Extras:

DarylS
.700 member

Reged: 10/08/05
Posts: 26499
Loc: Beautiful British Columbia, Ca...

Re: Ruger #1 accuracy. [Re: FRJ]
#200649 - 26/01/12 11:14 AM

FJR - the touching 1/4 rib is a good start. It cured my wild groups right off the bat. Aside from bedding the barrel onto the hanger, that's it for the .218Bee. The 7x57 needed only bedding as the 1/4 rib was already clear by .010".
It is a good idea to soak the 1/4 rib screws in penetrating oil for a few days before trying to remove them.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras:

AkMike
.416 member

Reged: 19/11/05
Posts: 2576
Loc: Anchorage, Alaska

Re: Ruger #1 accuracy. [Re: DarylS]
#200679 - 26/01/12 04:18 PM

Instead of buying that Hicks device I put a rubber O ring over the screw threads (Between the barrel and the forearm) for the forearm. It relieves the foreend pressure.

--------------------
"When you see that in order to produce, you need to obtain permission from men who produce nothing; when you see that money is flowing to those who deal not in goods, but in favors; you may know that your society is doomed." Ayn Rand

Post Extras:

Phillip
.300 member

Reged: 31/05/10
Posts: 174
Loc: North Carolina

Re: Ruger #1 accuracy. [Re: AkMike]
#200705 - 26/01/12 10:20 PM

I clean out the forearm,removing any high spots and bed a pressure point at the tip.. This is my .303 #1

--------------------
My rule of life prescribed as an absolutely sacred rite smoking cigars and also the drinking of alcohol before, after and if need be during all meals and in the intervals between them.
-Winston Churchill

Edited by CptCurl (06/03/12 11:07 PM)

Post Extras:

szihn
.400 member

Reged: 24/06/07
Posts: 2109
Loc: Wind River Valley, Wyoming

Re: Ruger #1 accuracy. [Re: Phillip]
#200734 - 27/01/12 08:16 AM

I have a #1 in 9.3X74R that I traded for, from one of the members on this forum.
It's very accurate with 3 loads I have tried.
I never did a thing to it. It shoots about 3/4" at 100 yds and so I could not be happier.

Post Extras:

JDL
.300 member

Reged: 25/12/10
Posts: 247
Loc: Louisiana

Re: Ruger #1 accuracy. [Re: Phillip]
#200830 - 28/01/12 05:47 AM

Quote:

I clean out the forearm,removing any high spots and bed a pressure point at the tip.. This is my .303 #1

Phillip, How much pressure do you use when making a pressure point? Thanks

Edited by CptCurl (06/03/12 11:08 PM)

Post Extras:

Pages: 1

Extra information

1 registered and 32 anonymous users are browsing this forum.

Moderator: Huvius

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 3482

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact