Home | Ezine | Forums | Links | Contact
NitroExpress.com: Currently an Oberndorf Type S, but previously???

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
twalker
.224 member


Reged: 23/07/10
Posts: 31
Loc: Southern California, USA
Currently an Oberndorf Type S, but previously???
      #183291 - 09/06/11 08:01 AM

I'm not too sure about the history of this rifle. I know that when I first saw it, it already had the added butt pad and I'm guessing that was when the rear portion of the stock had an extra coat of a darker oil applied. It also had a pre-patent single lever G&H sidemount attached but the rings weren't centered over the bore. It looks like the caliber markings were restamped at some point, and the serial number on barrel and receiver were marked with different tools. The serial number should place the manufacture date during 1914. The tang appears to be shorter than the original inletting; resulting in a patch aft of the tang in the stock. The safety had been converted to a two position side lever. Bore is .311; grooves .316. Freddy Brunner replaced the G&H mount (base was cracked where they attached to the receiver) with claw mounts. He cut a channel through the mounts so that you can still see the sights. Standard 8mm Norma shell will not chamber without some force resulting in marking the casing neck, but not the case shoulder or the bullet. Anyone happen to know where a guy can find a couple of boxes of 8mm J bore ammo?













Edited by CptCurl (23/06/11 09:37 PM)

Post Extras: Print Post   Remind Me!   Notify Moderator  
Huvius
.416 member


Reged: 04/11/07
Posts: 3561
Loc: Colorado
Re: Currently an Oberndorf Type S, but previously??? [Re: twalker]
      #183296 - 09/06/11 10:22 AM

Quote:

...and the serial number on barrel and receiver were marked with different tools.The tang appears to be shorter than the original inletting; resulting in a patch aft of the tang in the stock.



I would say it is common for Oberndorfs to have a different "font" for the serial number on the barrel and the front ring so that doesn't suggest anything strange to me.
As for the patch at the rear of the tang, it is also common for Mausers stocks to chip out there. Some I have seen have been pretty sizable depending on the grain of the wood. I could see that a big chip could be patched in this way and the tang looks totally standard to me. Perhaps it could have had a very short based peep sight fit at one time right at the rear of the tang but it would have been a very short base at that...

--------------------
He who lives in the past is doomed to enjoy it.

Post Extras: Print Post   Remind Me!   Notify Moderator  
twalker
.224 member


Reged: 23/07/10
Posts: 31
Loc: Southern California, USA
Re: Currently an Oberndorf Type S, but previously??? [Re: Huvius]
      #183298 - 09/06/11 10:53 AM

Thanks, I was hoping that the stock was just repaired. In any case, it's nicely balanced as is.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
0 registered and 15 anonymous users are browsing this forum.

Moderator:  NitroX 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 3328

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved