Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: modern cartridges for black powder replicas

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Muzzleloaders & Blackpowder

Pages: 1

Pivi
.224 member

Reged: 12/05/08
Posts: 36
Loc: italy

modern cartridges for black powder replicas
#120578 - 08/12/08 12:50 AM

Did somebody ever use this brass cartridges?
I think that the short ones are for gallager and smith replicas,but I don't know what replica could fire the long one.A friend of mine suggested me that it is for the chassepot,but it is hard to believe,since the original chassepot cartridge had a primer on the bottom whereas this one has a flash hole only.Any ideas?

--------------------
Proud to be Furlan pividori.marco@gmail.com

Post Extras:

FrankS
.300 member

Reged: 06/10/08
Posts: 114
Loc: New Iberia Louisiana

Re: modern cartridges for black powder replicas [Re: Pivi]
#120734 - 09/12/08 06:01 PM

I believe that maynard rifles used something like this. Except they had a flange on the rear end of the cartridge. Ballard also used something like this as well. Since they look to be unfired could they not be some kind of a "one off" that was built as a proof of concept thing. The civil war smith and gallagher cartridges also come to mind. The gallagher had a somewhat tapered case with a wedding ring around the front and the smith I think was just a straight case, although I could be wrong here.
A buddy once had a smith replica and always griped about the smith cases he used. Would always get stuck in the chamber. We measured the chamber I.D. and the cartridge O.D. and found that the cases had a slight taper. Jury rigged a mandrel in my lathe and took off some metal, basically just a skim cut. After that no problems. So thats about the extent of my meager knowledge. Frank

Post Extras:

lancaster
.470 member

Reged: 06/05/08
Posts: 9033
Loc: There's a lighthouse in the mi...

Re: modern cartridges for black powder replicas [Re: FrankS]
#120777 - 10/12/08 04:47 AM

what you have are brass cases for .45 and .54 cal sharps replika rifles. because there 4 or 5 different maker over the last 30 years and all have different chambers for rifles and carbine's there are also lot of different brass cases. not so popular in the states but most sharps shoter's in europe use such brass cases.

dixie gun works had have all the cases for breechloaders with seperat priming once and I have them laying around here. here are pics from the dgw site for some of them

.54 Burnside

.50 Gallagher

.50 Smith

.50 Smith plastic - copy of the orignal black rubber case

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians

Post Extras:

lancaster
.470 member

Reged: 06/05/08
Posts: 9033
Loc: There's a lighthouse in the mi...

Re: modern cartridges for black powder replicas [Re: lancaster]
#120780 - 10/12/08 05:15 AM

not so easy to find pics of sharps brass in the net

but thee are many more

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians

Post Extras:

Pivi
.224 member

Reged: 12/05/08
Posts: 36
Loc: italy

Re: modern cartridges for black powder replicas [Re: lancaster]
#120845 - 11/12/08 12:39 AM

Thanks folks.

I forgot to post the dimensional data of the 3 cases.They are all unfired.
Note the inside neck diameter

from left to right:

lenght 61.52 mm 42.01 mm 36.28 mm
neck diam 12.50 mm 14.75 mm 14.81 mm
base diam 12.59 mm 15.43 mm 15.43 mm
inside neck diam 8.64 mm 10.81 mm 12.33 mm
marks on the body U 517 451 U 517 54B U 517 54A

--------------------
Proud to be Furlan pividori.marco@gmail.com

Post Extras:

Dphariss
.300 member

Reged: 18/04/06
Posts: 130
Loc: Montana

Re: modern cartridges for black powder replicas [Re: lancaster]
#121263 - 15/12/08 02:57 PM

Quote:

what you have are brass cases for .45 and .54 cal sharps replika rifles. because there 4 or 5 different maker over the last 30 years and all have different chambers for rifles and carbine's there are also lot of different brass cases. not so popular in the states but most sharps shoter's in europe use such brass cases.
<snip>

How do you get them out of a Sharps?

Dan

Post Extras:

Pages: 1

Extra information

0 registered and 59 anonymous users are browsing this forum.

Moderator: DarylS

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 7406

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact