Home | Ezine | Forums | Links | Contact
NitroExpress.com: Rigby Rising Bite .400/.350

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Double Rifle Photos & Archive

Pages: 1
3DogMike
.400 member


Reged: 29/01/15
Posts: 1484
Loc: Western Slope, Colorado USA
Rigby Rising Bite .400/.350
      #390154 - 04/03/25 03:25 AM

Just back from a collaborative restoration by Steve Bertram & Aaron Little:

















26" barrels, 14 1/2' LOP, weighs 9lbs 3oz s
Sold to Capt. R.B. Brassey of 17th Lancers on 13May1905 between his service in the Boor War and then posting to India.

Reregulated and ribs relaid by Aaron Little. Rejoint, pick up barrel engraving, polish, and "London" reblack by Steve Bertram.
My load is 60.0 grains of Reloader 19, Fed 215 primer, and Woodleigh 310 grain bullets for a period correct ~2010'/sec.
Bertram offers proper head stamp brass and common 9.3x74R brass is easily formed to make fine usable brass.

- Mike


--------------------
"Will Rogers never met a fighter pilot"
- Anon

“Always carry a flask of whiskey in case of snakebite, and furthermore always carry a small snake."
-- W. C. Fields


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 27517
Loc: Beautiful British Columbia, Ca...
Re: Rigby Rising Bite .400/.350 [Re: 3DogMike]
      #390158 - 04/03/25 05:44 AM

Beautiful!

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
85lc
.400 member


Reged: 19/01/18
Posts: 1158
Loc: Georgia, USA
Re: Rigby Rising Bite .400/.350 [Re: DarylS]
      #390163 - 04/03/25 05:55 AM

Mike, Thatis a wonderful rifle and kit.

--------------------
RB


Post Extras: Print Post   Remind Me!   Notify Moderator  
3DogMike
.400 member


Reged: 29/01/15
Posts: 1484
Loc: Western Slope, Colorado USA
Re: Rigby Rising Bite .400/.350 [Re: 85lc]
      #390164 - 04/03/25 06:56 AM

Lt. (later Captain) R.B. Brassey:





--------------------
"Will Rogers never met a fighter pilot"
- Anon

“Always carry a flask of whiskey in case of snakebite, and furthermore always carry a small snake."
-- W. C. Fields


Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 4326
Loc: Nth QLD Australia
Re: Rigby Rising Bite .400/.350 [Re: 85lc]
      #390165 - 04/03/25 06:58 AM

Beautiful work by 2 master craftsmen to bring this wonderful piece of history back as good as new, good for now another 120+ years & still going strong!
Amazing engraving on this piece indeed.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Claydog
.400 member


Reged: 17/08/12
Posts: 1095
Loc: Katherine, Northern Territory ...
Re: Rigby Rising Bite .400/.350 [Re: 93x64mm]
      #390169 - 04/03/25 08:43 AM

Beautiful rifle. Fantastic restoration.

Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 40474
Loc: Barossa Valley, South Australi...
Re: Rigby Rising Bite .400/.350 [Re: Claydog]
      #390179 - 05/03/25 12:11 AM

Beautiful restoration.

A .358 310 gr bullet at 2000 fps plus, is a dangerous game killer, fine for buffalo where legal.

And as it has been re-regulated you know it will shoot to regulation.

Should be a very worthwhile double rifle.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Edited by NitroX (05/03/25 03:05 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
degoins
.333 member


Reged: 28/02/06
Posts: 445
Loc: SC, USA
Re: Rigby Rising Bite .400/.350 [Re: NitroX]
      #390182 - 05/03/25 02:09 AM

Magnificent!!!

Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 27517
Loc: Beautiful British Columbia, Ca...
Re: Rigby Rising Bite .400/.350 [Re: degoins]
      #390189 - 05/03/25 04:51 AM

That's decent ballistics. I know for a fact that a .358 250gr. at 2,160fps works wonderfully on BIG moose.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
CM76
.275 member


Reged: 21/04/22
Posts: 60
Loc: Wollongong, NSW Australia
Re: Rigby Rising Bite .400/.350 [Re: DarylS]
      #390228 - 06/03/25 08:05 AM

Beautiful rifle and lovely restoration - congratulations!

Chris


Post Extras: Print Post   Remind Me!   Notify Moderator  
3DogMike
.400 member


Reged: 29/01/15
Posts: 1484
Loc: Western Slope, Colorado USA
Re: Rigby Rising Bite .400/.350 [Re: CM76]
      #390233 - 06/03/25 02:14 PM

Weather still too cold to want to get out to the range for actual 50 yard target………..will post results when I finally get it on paper.

- Mike

--------------------
"Will Rogers never met a fighter pilot"
- Anon

“Always carry a flask of whiskey in case of snakebite, and furthermore always carry a small snake."
-- W. C. Fields


Post Extras: Print Post   Remind Me!   Notify Moderator  
Marrakai
.416 member


Reged: 09/01/03
Posts: 3674
Loc: Darwin, Top End of Australia
Re: Rigby Rising Bite .400/.350 [Re: 3DogMike]
      #390235 - 06/03/25 04:52 PM

Add my admiration to the pile.
Rising bite Rigbys rock!

I should add: just last evening watched one of Dig's short youtube videos on a 16-bore rising bite sidelock.
The name on the rib and lock-plates?
No, not Rigby....

Thomas Bissell!

Look forward to your range report when the weather improves, Mike.

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au


Post Extras: Print Post   Remind Me!   Notify Moderator  
CJF
.333 member


Reged: 07/08/17
Posts: 317
Loc: United States
Re: Rigby Rising Bite .400/.350 [Re: Marrakai]
      #390236 - 06/03/25 05:01 PM

Great looking rifle, Mike. Love the work that Steve and Aaron did. Congrats.
Chris


Post Extras: Print Post   Remind Me!   Notify Moderator  
rigbymauser
.400 member


Reged: 15/05/05
Posts: 2021
Loc: Denmark
Re: Rigby Rising Bite .400/.350 [Re: CJF]
      #390269 - 08/03/25 08:12 PM

Thanks for sharing. Wonderful piece of history. Rigby gun in a Rigby caliber.

Post Extras: Print Post   Remind Me!   Notify Moderator  
bouldersmith
.375 member


Reged: 23/03/06
Posts: 629
Loc: Boulder Colorado
Re: Rigby Rising Bite .400/.350 [Re: rigbymauser]
      #390680 - 24/03/25 03:20 AM

Mike has great taste, always a pleasure to work on his guns and rifles.

--------------------
New website http://www.bertramandco.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
jcorry
.275 member


Reged: 09/03/08
Posts: 60
Loc: West Coast of Ireland & London
Re: Rigby Rising Bite .400/.350 [Re: 3DogMike]
      #390929 - 04/04/25 08:29 AM

Lovely rifle. Where do you get 310grn bullets from - Woodleigh don’t seem to have any?

Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 40474
Loc: Barossa Valley, South Australi...
Re: Rigby Rising Bite .400/.350 [Re: jcorry]
      #390948 - 04/04/25 04:13 PM

Good you got in again. Woodleigh said recently they're making most SP bullets again 8mm to .500.

Quote:

Fire Update 21.02.2025
Thank you for your patience and support, it has been frustrating for all concerned.

We have most soft nose bullets back in stock from #06 500 Nitro SN to #64E 8x57I here in Australia. Just starting with exports of this new stock.

There will be two new USA stockists, who will have supplies in next two months. All going well.

Raven Rocks Precision
Miken Gunworks Inc

Smaller calibres coming soon.
We will not be making any FMJ this year. If an FMJ is needed please use our Hydrostatically Stabilised solids.

Regards,
Geoff & Shirley McDonald.




--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
jcorry
.275 member


Reged: 09/03/08
Posts: 60
Loc: West Coast of Ireland & London
Re: Rigby Rising Bite .400/.350 [Re: NitroX]
      #390951 - 04/04/25 08:43 PM

What do we think about using their Hydro solids in a 120 year old Rigby double!?

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 28 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 742

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved