Home | Ezine | Forums | Links | Contact
NitroExpress.com: 350 gr. 375 H&H

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

Pages: 1
dangerousdave
.224 member


Reged: 04/02/04
Posts: 14
Loc: Ft.Lauderdale,Florida
350 gr. 375 H&H
      #22844 - 30/12/04 07:34 AM

Can anyone share experience and load data on loading the 350 gr.bullet in 375 H&H

--------------------
Be good to your children,they pick your nursing home


Post Extras: Print Post   Remind Me!   Notify Moderator  
Will
.333 member


Reged: 04/02/03
Posts: 303
Loc: Kansas
Re: 350 gr. 375 H&H [Re: dangerousdave]
      #22875 - 30/12/04 03:23 PM

Someone offered this up, on AR I think. Don't know how good or bad it is, and haven't tried it.

IMR4320/61 gr./2237 fps/Max 65.5 gr./2405 fps
RL-15/62 gr./2253 fps/Max 66.5 gr./2407 fps

--------------------
_________________________________________________
Bill Stewart

Once you have been amongst them, there is no such thing as too much gun.


Post Extras: Print Post   Remind Me!   Notify Moderator  
BFaucett
.333 member


Reged: 13/01/04
Posts: 472
Loc: Houston, Texas
Re: 350 gr. 375 H&H [Re: dangerousdave]
      #22893 - 31/12/04 03:33 AM

Below is the .375 H&H load data for the 350gr Barnes Original bullet taken from the old Barnes Reloading Manual Number One. The Barnes Original is a lead core "cup and core" bullet. Of course, bullet shapes will vary as will bearing surface length, etc. but it should be close to the Woodleigh 350 gr bullet. The data should at least provide a starting point.

One note of caution: I don't know if Barnes used a pressure gun or not when developing the load data for Manual #1. (Many bullet makers did not have access to pressure guns for testing years ago like they do now.) As always, start low and work up. I have not tried any of these loads.

Also, you might to want take at look at the .375 H&H with 350 Gr Bullets thread here on the NitroExpress forums.

-Bob F.





Post Extras: Print Post   Remind Me!   Notify Moderator  
atkinson6
.375 member


Reged: 26/01/04
Posts: 678
Loc: Idaho
Re: 350 gr. 375 H&H [Re: BFaucett]
      #22984 - 31/12/04 03:38 PM

Pierre van Tonder and I shot some Buffalo with the 350 gr. PP and RN Woodleighs year before last while cleaning up some permits and to feed the game scouts and locals..We recovered a couple of bullets, but most passed through..The PP penetrated more than the RN, but both were excellent bullets...I loaded them with 66.0 grs. of RL-15....They killed exceptionally well and they sure are an accruate bullet in both of our guns. I got the impression the old 375 took a step up and riveled the 416 perhaps...

I would recommend the RN for herd shooting and the PPs for all else...


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 18 anonymous users are browsing this forum.

Moderator:   

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2734

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved