Home | Ezine | Forums | Links | Contact
NitroExpress.com: Steyr Scope Rings for Swing-Out Mount

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

Pages: 1
Maximumsmoke
.224 member


Reged: 12/02/24
Posts: 3
Loc: MN FL
Steyr Scope Rings for Swing-Out Mount
      #382511 - 13/02/24 09:12 AM

I just bought a M-S, and it came with the Steyr swing-out scope blocks/mounts installed, but no scope rings. Does anyone out there in M-S Land know where I might obtain rings to fit this mount. My mount is the one with the swing-out pivot on the left side of the front mount, not the one with the pivot centered in the front mount. By the way, again this is the Steyr mount, and scope is pivoted horizontally to decouple it from the rear mount, and then can be lifted from the front mount. This is not a tilt-off or tilt-over mount, where the axis of tilt is parallel with the barrel.

Thanks,
Tony


Post Extras: Print Post   Remind Me!   Notify Moderator  
Waidmannsheil
.400 member


Reged: 19/04/13
Posts: 2446
Loc: Melbourne Australia
Re: Steyr Scope Rings for Swing-Out Mount [Re: Maximumsmoke]
      #382512 - 13/02/24 09:45 AM

What size rings are you after as there were many different sizes.


Matt.

--------------------
There is nothing wrong with vegetarian food, so long as there is meat with it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rothhammer1
.400 member


Reged: 06/01/17
Posts: 1826
Loc: The Redwoods of California
Re: Steyr Scope Rings for Swing-Out Mount [Re: Maximumsmoke]
      #382546 - 14/02/24 08:52 AM

Quote:

My mount is the one with the swing-out pivot on the left side of the front mount, not the one with the pivot centered in the front mount. By the way, again this is the Steyr mount, and scope is pivoted horizontally to decouple it from the rear mount, and then can be lifted from the front mount. This is not a tilt-off or tilt-over mount, where the axis of tilt is parallel with the barrel.

Thanks,
Tony




This fella?:



--------------------
Citizen of the Cherokee Nation


Post Extras: Print Post   Remind Me!   Notify Moderator  
Maximumsmoke
.224 member


Reged: 12/02/24
Posts: 3
Loc: MN FL
Re: Steyr Scope Rings for Swing-Out Mount [Re: Rothhammer1]
      #382559 - 15/02/24 12:17 AM

@ Rothhammer1 -- Yes, that mount is the one I have.

@ Waidmannsheil -- Ring diameter was not the question. It was about ring availability, which I presume is minimal except from maybe a few knowledgeable people. I'll deal with the diameter of the rings when I find them. Presummably, scopes to fit rings are easier to find than rings to fit this mount. One inch dia. would be a good starting point for me, and appears likely to be the most common size. I am aware of other sizes, especially for larger scope objectives.

Thanks.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 63 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 1110

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved