Home | Ezine | Forums | Links | Contact
NitroExpress.com: DIY Cocking Piece Aperture for my 1910 MS

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
fjrdoc
.300 member


Reged: 20/05/22
Posts: 212
Loc: United States
DIY Cocking Piece Aperture for my 1910 MS
      #380384 - 27/10/23 09:37 AM

I had purchased a model 1910 MS in February of this year to finish out my collection of proprietary cartridge rifles. I have done reloading and shooting with the rifle but the factory sights are very difficult to see even in good light.
All my vintage hunting rifles wear aperture sights because that's what I enjoy shooting. As most of you know, original aperture sights don't show up on the market much and usually command a hefty price when they do.
Some time back, I purchased a Parker Hale Sportarget sight that was originally tang mounted for an unknown rifle. I thought that I could easily cut off the mounting tab and silver solder it to an extra firing pin nut that I had. Unfortunately, the barrel of the sight was too tall to use with the Mannlicher and I couldn't figure out a way to shorten it. I put the sight away and decided to keep looking for something that would work.
Recently, a Parker Hale 16 showed up in eBay. I originally thought that I would modify the PH16 for use on the 1910 until a light bulb went off in my head. Fortunately, the barrel of the PH16 was easily swapped over to the Sportarget. I was able to finish the sight this week and I'm happy with how it looks. I also purchased a Skinner brass Partridge-style front sight which I will need to file down to the appropriate height. Thought that I would share this with my fellow NitroExpress members.

Post Extras: Print Post   Remind Me!   Notify Moderator  
sharps4590
.333 member


Reged: 09/03/16
Posts: 270
Loc: Missouri Ozarks
Re: DIY Cocking Piece Aperture for my 1910 MS [Re: fjrdoc]
      #380403 - 27/10/23 10:51 PM

Well done, sir!

--------------------
Jesus said, "I am the way the truth and the life. No one comes to the Father but through me." John14:6

Post Extras: Print Post   Remind Me!   Notify Moderator  
fjrdoc
.300 member


Reged: 20/05/22
Posts: 212
Loc: United States
Re: DIY Cocking Piece Aperture for my 1910 MS [Re: sharps4590]
      #380409 - 28/10/23 05:06 AM

Thanks sharps. Another tinkering project under my belt.

Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 4198
Loc: Nth QLD Australia
Re: DIY Cocking Piece Aperture for my 1910 MS [Re: fjrdoc]
      #380410 - 28/10/23 07:15 AM

fjrdoc
I'm not at all knowledgeable on MS's, so your extra firing pin nut holds the new rear sight - so it must be modified to then hold the rear aperture, was it then brazed on?
Is the Sportarget made of brass & if so how do you 'blacken' it?
Wonderfully done indeed mate, well above my skill level!
Looks like it truly belongs there, fantastic work!

Edited by 93x64mm (28/10/23 07:16 AM)

Post Extras: Print Post   Remind Me!   Notify Moderator  
fjrdoc
.300 member


Reged: 20/05/22
Posts: 212
Loc: United States
Re: DIY Cocking Piece Aperture for my 1910 MS [Re: 93x64mm]
      #380417 - 28/10/23 11:08 AM

The Sportarget is made of steel. I silver soldered it onto the steel firing pin nut. I've had very good success with silver soldering other sights before. I used Mark Lee's Express bluing solution to finish the completed project. Of all the bluing solutions that I've used previously, it is the easiest to use and it gives a beautiful deep black finish. Thanks for the compliment.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Rothhammer1
.400 member


Reged: 06/01/17
Posts: 1826
Loc: The Redwoods of California
Re: DIY Cocking Piece Aperture for my 1910 MS [Re: fjrdoc]
      #380418 - 28/10/23 01:22 PM


Very nicely done.

Here's an original:



--------------------
Citizen of the Cherokee Nation

Post Extras: Print Post   Remind Me!   Notify Moderator  
fjrdoc
.300 member


Reged: 20/05/22
Posts: 212
Loc: United States
Re: DIY Cocking Piece Aperture for my 1910 MS [Re: Rothhammer1]
      #380429 - 28/10/23 10:53 PM

Not the best pic Roth but my work came out pretty close to the original.

Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 4198
Loc: Nth QLD Australia
Re: DIY Cocking Piece Aperture for my 1910 MS [Re: fjrdoc]
      #380449 - 29/10/23 09:14 PM

Quote:

Not the best pic Roth but my work came out pretty close to the original.


Not wrong there fjrdoc - certainly looks the real deal - will certainly have to look into that bluing solution you talked about!

Post Extras: Print Post   Remind Me!   Notify Moderator  
LRF
.333 member


Reged: 28/03/11
Posts: 350
Loc: minnesota ,usa
Re: DIY Cocking Piece Aperture for my 1910 MS [Re: fjrdoc]
      #380450 - 29/10/23 10:16 PM

Quote:

..... I used Mark Lee's Express bluing solution to finish the completed project. Of all the bluing solutions that I've used previously, it is the easiest to use and it gives a beautiful deep black finish. .....



I fully agree, hands down the best, easiest to use, most mistake resistant out there. IMO

Post Extras: Print Post   Remind Me!   Notify Moderator  
kuduae
.400 member


Reged: 13/01/10
Posts: 1792
Loc: middle of Germany
Re: DIY Cocking Piece Aperture for my 1910 MS [Re: LRF]
      #380492 - 31/10/23 05:37 AM

A very nice job, fjrdoc! I could not do any better. In fact, it resembles one of mine somewhat. I once started with another P-H peep sight, very similar to the one you used. I modified it by cutting off unneeded metal and silver brazed it on the striker nut of my M1925 M-S in 8x60S.


Rothhammer1, here is another original. Mounted by G.Gibbs, Bristol, on my M1903.

Post Extras: Print Post   Remind Me!   Notify Moderator  
fjrdoc
.300 member


Reged: 20/05/22
Posts: 212
Loc: United States
Re: DIY Cocking Piece Aperture for my 1910 MS [Re: kuduae]
      #380494 - 31/10/23 06:39 AM

Thanks kuduae. I had read your previous post on cocking piece apertures. Based on your post, I purchased a used PH16 to use on my rifle. Fortunately, I was able to use the PH16 "barrel" on my Sportarget. You did a lot of metal modification to make the 16 work on your rifle.
The wood on that George Gibbs 1903 is beautiful! My 1893 Steyr by George Gibbs has a bolt release aperture that looks like a precursor to the Lyman 36.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
0 registered and 110 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2049

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved