Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Wm. Evans .450/.400

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifle Photos & Archive

Pages: 1

3DogMike
.400 member

Reged: 29/01/15
Posts: 1464
Loc: Western Slope, Colorado USA

Wm. Evans .450/.400
#371973 - 03/12/22 10:35 AM

William Evans .450/.400 3'' (recent refinish and chambers reamed to .450/.400 3" Jeffery from original .450/.400 3 1/4")
26" barrels, 10lbs 4oz, finished in ~1928
The classic A&W-C Screw Grip action
- Mike

--------------------
"Will Rogers never met a fighter pilot"
- Anon

“Always carry a flask of whiskey in case of snakebite, and furthermore always carry a small snake."
-- W. C. Fields

Post Extras:

Huvius
.416 member

Reged: 04/11/07
Posts: 3556
Loc: Colorado

Re: Wm. Evans .450/.400 [Re: 3DogMike]
#371979 - 03/12/22 01:38 PM

What a nice double!
Everything you want and nothing you don't.

--------------------
He who lives in the past is doomed to enjoy it.

Post Extras:

degoins
.333 member

Reged: 28/02/06
Posts: 435
Loc: SC, USA

Re: Wm. Evans .450/.400 [Re: Huvius]
#371995 - 03/12/22 11:14 PM

WOW....gorgeous!!!

Post Extras:

85lc
.400 member

Reged: 19/01/18
Posts: 1031
Loc: Georgia, USA

Re: Wm. Evans .450/.400 [Re: degoins]
#372003 - 04/12/22 05:56 AM

Mike,

hat a beautiful rifle and very nicely refinished. Who did the work did a great job.

What is the difference between the 450.400 3" and 450/400 3 1/4"? I guess I thought the 3" version was just the same cartride but just 1/4" shorter. If that is correct, what would rechambering do? I ask because I have reloaded 450/400 3 1/4" BPE ammo with a 3" die set.

--------------------
RB

Post Extras:

3DogMike
.400 member

Reged: 29/01/15
Posts: 1464
Loc: Western Slope, Colorado USA

Re: Wm. Evans .450/.400 [Re: 85lc]
#372007 - 04/12/22 06:47 AM

Hi RB.
The short answer is that the 3" Jeffery has less case body taper and a thicker rim, thus would not chamber in the .450/.400 3 1/4" rifles. Likely part of the reason Jeffery did this was so that his new Full Nitro (Cordite) cartridge could not be fired in the older Black Powder Express rifles. (Plus only proprietary Jeffery ammo could be chambered and fired in Jeffery rifles?)
Easy to see when one looks at cartridge dimension prints.

You can reload the 3 1/4" with a Jeffery die set, however it would be essentially a neck size only operation. As well, depending upon the die maker, the 1/4" longer case could have its mouth boogered up if the decapping stem design gets in the way when running the case too far up into the sizing die. <<< Don't ask me how I know this

- Mike

--------------------
"Will Rogers never met a fighter pilot"
- Anon

“Always carry a flask of whiskey in case of snakebite, and furthermore always carry a small snake."
-- W. C. Fields

Post Extras:

93x64mm
.416 member

Reged: 07/12/11
Posts: 4199
Loc: Nth QLD Australia

Re: Wm. Evans .450/.400 [Re: Huvius]
#372008 - 04/12/22 07:17 AM

Quote:

What a nice double!
Everything you want and nothing you don't.

No one could have put it better Huvius for an old soldier approaching his century mark!

Post Extras:

Waidmannsheil
.400 member

Reged: 19/04/13
Posts: 2443
Loc: Melbourne Australia

Re: Wm. Evans .450/.400 [Re: 93x64mm]
#372011 - 04/12/22 10:54 AM

Certainly a very nice rifle in a ripper cartridge. Performance of either is basically the same but the 3" version is a lot easier to buy components for. Well done.

Matt.

--------------------
There is nothing wrong with vegetarian food, so long as there is meat with it.

Post Extras:

Pages: 1

Extra information

0 registered and 103 anonymous users are browsing this forum.

Moderator: CptCurl

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2146

NitroExpress.com

Home | Ezine | Forums | Links | Contact