Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: I can't get it up!

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

Pages: 1

Ash
.400 member

Reged: 10/05/11
Posts: 1653
Loc: Australia

I can't get it up!
#263373 - 10/04/15 12:22 PM

How do i get the tang peep on a MS to come up? The little button looking thing on the right side of it wont budge. The pictures the seller sent had it up. What am i doing wrong??

Cheers!

--------------------
.

Post Extras:

2152hq
.300 member

Reged: 20/05/12
Posts: 126
Loc: USA

Re: I can't get it up! [Re: Ash]
#263375 - 10/04/15 12:48 PM

Don't know if it's the problem,,but I had a rifle with one that you had to slightly depress the peep sight to allow the button to be moved (unlocked). Then the sight would rotate upwards into position under spring tension.
Perhaps it was made that way so recoil wouldn't unlock the thing and have it spring into action on it's own,,,or maybe the one I had just didn't work right in the first place. Worth a look and a try.

Post Extras:

Ash
.400 member

Reged: 10/05/11
Posts: 1653
Loc: Australia

Re: I can't get it up! [Re: 2152hq]
#263376 - 10/04/15 12:49 PM

I'll give it a go right now and report back.

No luck, but was worth a try ay? Thanks for the suggestion.
Will figure it out when we strip the thing down for a big thorough clean and to put in a thicker recoil plate to try and stop the stock cracking.

--------------------
.

Edited by Ash (10/04/15 12:53 PM)

Post Extras:

Igorrock
.400 member

Reged: 01/03/07
Posts: 1649
Loc: Finland

Re: I can't get it up! [Re: Ash]
#263384 - 10/04/15 03:46 PM

Quote:

to put in a thicker recoil plate to try and stop the stock cracking.

I'm quite sure that new recoil pad do not help with yours problem. Or it depends where the cracks are...? One foto would help.

--------------------
http://promaakari.wordpress.com/

Post Extras:

Igorrock
.400 member

Reged: 01/03/07
Posts: 1649
Loc: Finland

Re: I can't get it up! [Re: Igorrock]
#263385 - 10/04/15 03:52 PM

Quote:

The little button looking thing on the right side of it wont budge.

Have you tested this; first gently push tang peep down, let it down and same time push that small button. By the way, have you tried to push button to different directions ?

--------------------
http://promaakari.wordpress.com/

Post Extras:

NitroX
.700 member

Reged: 25/12/02
Posts: 39881
Loc: Barossa Valley, South Australi...

Re: I can't get it up! [Re: Igorrock]
#263389 - 10/04/15 04:30 PM

Couldn't resist ...

But if you can't get it up, pushing on the little "button" won't help you at all, careful rubbing in with oil of your tang might !