Home | Ezine | Forums | Links | Contact
NitroExpress.com: Lancaster oval bore muzzleloader

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifle Photos & Archive
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
underlever
.300 member


Reged: 01/02/07
Posts: 164
Loc: N.S.W Australia
Lancaster oval bore muzzleloader
      #258475 - 02/01/15 12:33 PM

Made approx. 1852, this is as fine a double as I've ever seen. The quality of this rifle is such that I believe it cannot be improved upon. Barrels are 31 15/16" long with bores that measure .490"x .535" and in very good condition.
After playing with this rifle for awhile, I've come to the conclusion that the double rifle had been perfected by this time, maybe even earlier with only technical advances occurring.
There is no standing rear sight as part of the usual set up but for the short range stuff you simply use the notch in the standing breech. Due to the fit of this rifle, its all you need.





























Edited by CptCurl (29/03/16 09:48 AM)

Post Extras: Print Post   Remind Me!   Notify Moderator  
tinker
.416 member


Reged: 12/03/05
Posts: 4835
Loc: Nevada
Re: Lancaster oval bore muzzleloader [Re: underlever]
      #258476 - 02/01/15 01:04 PM

That'll do.

What's the charge?
What's the bullet weight?
How does it print?


So Nice!!!





Cheers
Tinker

--------------------
--Self-Appointed Colonel, DRSS--



"It IS a dangerous game, and so named for a reason, and you can't play from the keyboard. " --Some Old Texan...

Post Extras: Print Post   Remind Me!   Notify Moderator  
TH44
.375 member


Reged: 21/02/09
Posts: 734
Loc: West UK
Re: Lancaster oval bore muzzleloader [Re: underlever]
      #258477 - 02/01/15 01:21 PM

The late percussion rifle had everything going for it - quality all round. Charles Lancaster produced some of the best
The arguments/discussions pro/con breechloading went on for years, especially where rapid reloading was less of an issue - live pigeon shooting etc.

Interesting the number 2 on the barrels, usually one of a pair but clearly not in this case

The shallow vee with the fold flat sights is a nice touch, as is the earlier straight stock with finger rest

Is there a bore size under the barrels? 32? - I have always been interested how his "oval" bore measured

Very nice

TH44

Post Extras: Print Post   Remind Me!   Notify Moderator  
CptCurlAdministrator
.450 member


Reged: 01/05/04
Posts: 5284
Loc: Fincastle, Botetourt County, V...
Re: Lancaster oval bore muzzleloader [Re: TH44]
      #258484 - 02/01/15 11:39 PM

That's a superb rifle and will be really fun to shoot. Please give a range report in due course.

Congratulations!

Curl

--------------------
RoscoeStephenson.com

YOUR DOUBLE RIFLE IS YOUR BEST FRIEND.



Post Extras: Print Post   Remind Me!   Notify Moderator  
Huvius
.416 member


Reged: 04/11/07
Posts: 3556
Loc: Colorado
Re: Lancaster oval bore muzzleloader [Re: CptCurl]
      #258487 - 03/01/15 03:21 AM

Lovely rifle!
Does the mold cast an mildly ovoid bullet to fit the bores?
I wonder, are they intended to be patched as a roundball would (but they are hollow based...) or paper patched (but no parallel sides...) or left bare lead?

--------------------
He who lives in the past is doomed to enjoy it.

Post Extras: Print Post   Remind Me!   Notify Moderator  
LesLeeSpeed
.300 member


Reged: 14/11/13
Posts: 223
Loc: Queensland Australia
Re: Lancaster oval bore muzzleloader [Re: Huvius]
      #258500 - 03/01/15 09:46 AM

Hi,
I once owned a Lancaster Oval Bore 500BPE D/R and I believe they were meant to be paper patched. It is a beautiful rifle, and one of many that I shouldn't have sold, but such is life. I think that mould is a solid base ant that is not a hole for a plug but the sprue hole. The sprue would be cut probably by the shanks of the mould handle. Being a M/L i would think that the patch would be fitted as you loaded, but would need to be pretty tight.
Just my thoughts.
LesLeeSpeed

Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26994
Loc: Beautiful British Columbia, Ca...
Re: Lancaster oval bore muzzleloader [Re: LesLeeSpeed]
      #258502 - 03/01/15 10:32 AM

Absolutely incredible - what a wonderful SCORE!

The mould pictured is a bit longer in the nose, but typical
"PICKET" bullet shape, meant for a cloth patch. The rounded base and VERY short, almost non-existent bearing surface shows this.

As thus, it will be difficult to load squarely, so a short starter cupped to fit both the bullet's nose and quite close to bore size will be necessary for accurately loading the bullet. The end of the loading rod used to push the bullet down on the powder charge, will also need to have am almost bore riding nose, with a hollow to also fit the bullet's nose.

You should attempt to measure the rate of twist - if 48" or slower, a round ball loading, say a .490" ball and .020 patch might be easier to get good accuracy. Special bore riding noses on starter and loading rod are then, not necessary.

I am either seeing evenly spaced lint in the muzzles or what looks to be the ends of lands. If lands, it is not oval bored, but has more standard rifling.

.535" groove with .490" bore, shows VERY deep rifling for a bullet - ie: .0225" deep per side. That is even deep for patched round balls, the norm being .010" to .016" at the deepest.

This depth of rifling definitely mandates a cloth patch and a thick one at that. A

Accuracy might be difficult until the muzzles are smoothly crowned as well. They may already be relieved by deliberate filing, as were many German rifles meant for patched balls or bullets.

Please keep us posted on developments.

The "tubes" as they were wont to call nipples, will most likely need to be replaced. Please be careful in their removal. Many of these guns had poorly designed nipples, with oversized inner holes. This lets too much pressure back out the nipple and is shocking for the lock, not to mention cap fragments flying about your shiny eye-ball/s.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras: Print Post   Remind Me!   Notify Moderator  
Huvius
.416 member


Reged: 04/11/07
Posts: 3556
Loc: Colorado
Re: Lancaster oval bore muzzleloader [Re: LesLeeSpeed]
      #258508 - 03/01/15 11:30 AM

Quote:

?..I think that mould is a solid base ant that is not a hole for a plug but the sprue hole.



Duh!! For some reason, I just assumed there was a base plug but failed to think just how the lead would be poured in!
Gives me an idea!
How about a mold such as this with a good sized cylinrical sprue upon which donut shaped wads could be stacked?
That would insure that the bullet goes down the bore straight and if made of lubed felt, would seal the oval bore nicely.
Not sure if the wads would shed without upsetting the bullet path, but it could work. The bullet would be like a dart.

--------------------
He who lives in the past is doomed to enjoy it.

Post Extras: Print Post   Remind Me!   Notify Moderator  
rglenz
.300 member


Reged: 14/03/08
Posts: 136
Loc: w. Minn
Re: Lancaster oval bore muzzleloader [Re: Huvius]
      #258512 - 03/01/15 12:09 PM

Huvius,you maybe on to something! Your idea would explain the big sprue,also I think I see a cutter notch in the handles,next to the mold.If this is the original mold it would help explain how the oval bores worked with bullets.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Huvius
.416 member


Reged: 04/11/07
Posts: 3556
Loc: Colorado
Re: Lancaster oval bore muzzleloader [Re: rglenz]
      #258533 - 03/01/15 06:40 PM

Quote:

Huvius,you maybe on to something! Your idea would explain the big sprue,also I think I see a cutter notch in the handles,next to the mold.If this is the original mold it would help explain how the oval bores worked with bullets.



Hmmmm...
If that is a notch in the scissor part of the mold, then the resulting sprue would be about half its as-cast length which would make a nice post for a .20-.25" wad to sit on.
I don't necessarily think that is how these bullets are meant to work, but it sure would make sense to me and wouldn't it be a neat project to try out?

--------------------
He who lives in the past is doomed to enjoy it.

Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26994
Loc: Beautiful British Columbia, Ca...
Re: Lancaster oval bore muzzleloader [Re: Huvius]
      #258558 - 04/01/15 04:11 AM

Sissor-type moulds with sprue cuttoffs usually had them on the handle end of the hinge pin of the mould handles.

The rifling twist will dictate how long you can make the 'sprue'.
Attaching wads to it, might be a good idea - or not. Testing will tell that story.
Still looks like a 'typical' American picket-type bullet to me.

Yes- the addition of wads would help centre the bullet.
What is the diameter of the inside cavity of the mould? Subtract about .002" for actual bullet size in soft lead, which is probably correct for the gun. Hardened lead makes loading more difficult to impossible in a muzzleloader and will eliminate the bullet's ability to obturate to help seal the bore.

The sprue cutters normally cut the sprue off square with the base or nose of the bullet.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras: Print Post   Remind Me!   Notify Moderator  
weimar
.224 member


Reged: 03/08/09
Posts: 8
Loc: UK
Re: Lancaster oval bore muzzleloader [Re: DarylS]
      #264237 - 26/04/15 10:35 PM

I would be interested to know the serial number

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
0 registered and 55 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 5852

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved