lawndart
.224 member
Reged: 09/05/06
Posts: 35
Loc: Idaho, USA
|
|
I located brass with the correct markings for the various M/S cartridges.
6.5x54 M/S Norma
8x56 M/S Horneber
9x56 M/S Horneber
9.5x556/57 Horneber
Other than the Norma offering, these are SPENDY.
I am starting to convert 8x57 Mauser brass (good quality brass) into the various M/S sizes. Configurations will be exact, but the name will not be.
I will post pictures as I go along.
I mentioned in a Double Gun post that I and a few others are working hard to do all the R&D to bring various cartridges back to their niche markets for just enough to live on ourselves. I have located sources of the correct bullets for the various (and variable) bore sizes. I read this column with keen interest, and hope to be able to import some "Perfect" ammunition, as well as some "Perfectly shoot-able and hunt-able" ammunition.
Thanks,
LD
|
xausa
.400 member
Reged: 07/03/07
Posts: 2037
Loc: Tennessee, USA
|
|
I was going to a lot of trouble to size .30-'06 bases down to the correct size for 9X56MS, when I happened to pick up a piece of unfired Remington .35 Whelen brass from my loading bench and measured the base. Lo and behold, it was already the right size. Brass problem solved.
I am sure you are aware that Hornady makes .268" diameter bullets for the 6.5 Carcano, which are the correct size for most 6.5 MS barrels. Be careful, though. I have a Greek MS which had been rebarrelled, and the new barrel is .264". Fortunately a cartridge loaded with a .268" bullet will not chamber in it. I am thinking of adopting a color code system like the Germans have with their 8mm cartridges, whereby they paint the primers on the "S" (.323") diameter cartridges black.
|
NitroX
.700 member
Reged: 25/12/02
Posts: 40583
Loc: Barossa Valley, South Australi...
|
|
Should prove useful for M-S owners.
--------------------
John aka NitroX
 ...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"
|
lawndart
.224 member
Reged: 09/05/06
Posts: 35
Loc: Idaho, USA
|
|
That 35 Whelen tip is very useful, thank you. I will order some up and have a go with that.
A friend practically gave me a small bench lathe last week. After I make up some fixtures, it should be pretty straightforward to size 8x57 and 35 Whelen to what we need.
|
ChrisPer
.300 member
Reged: 12/05/08
Posts: 235
Loc: Australia
|
|
I use 9.5x57 MS form dies from RCBS. For some reason my cartridges say 'W-W 30-06' on the headstamp.
|
RigbyUser
.275 member
Reged: 23/11/08
Posts: 65
Loc: Victoria, Australia
|
|
My 1910 takedown model came with 100 formed cases, these were 35 Whelan based. I've used them lots now and they hold up well.
|
Previous
Index
Next
Threaded
Edit
Reply
Quote
