Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Steel buttcap on .308 win - recoil?

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

Pages: 1

AndyB
.224 member

Reged: 13/09/12
Posts: 27
Loc: Europe

Steel buttcap on .308 win - recoil?
#224885 - 06/02/13 09:23 PM

Hello, I'm curious if someone have any input on a steel buttcap on a .308 win?
On one hand Im a little worried the recoil going to be much harder, on the other hand I cant imagine steel being much worse than a bakelite/hard-plastic one. Also, .308 win. Isnt the hardest recoiling caliber..

The reason Im curious is that I found a old Krag-Jørgensen stock in the attic during the christmas, the wood is too (water) damaged to restore and most metal parts are heavily attacked by rust, except for the buttcap that have this neat little "hatch" Id like to make use of.

Regards
Andy.

Post Extras:

500Nitro
.450 member

Reged: 06/01/03
Posts: 7244
Loc: Victoria, Australia

Re: Steel buttcap on .308 win - recoil? [Re: AndyB]
#224886 - 06/02/13 09:42 PM

Shot an SLR for years with one, a prick of a thing
on an SLR but you got used to it, unless the gun
was in the wrong spot and then you knew it.

You can always slip a cheap rubber recoil pad over it.

Post Extras:

DarylS
.700 member

Reged: 10/08/05
Posts: 26977
Loc: Beautiful British Columbia, Ca...

Re: Steel buttcap on .308 win - recoil? [Re: 500Nitro]
#224894 - 07/02/13 02:15 AM

I had a nicely checkered & blued Neidner Butt Plate on my first .458 2" - looked really nice and since I was a young fellow, the recoil wasn't too bad at all. I was running 400gr. at 2,150fps, 350's at 2,290fps and 500's at 2,060fps.

So - a .308 would be easy - for a strong well muscled young fellow.

Today, I'd probably put a nice, recoil absorbing Limbsaver recoil pad on it.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras:

SAHUNT
Sponsor

Reged: 27/12/04
Posts: 900
Loc: Centurion, RSA

Re: Steel buttcap on .308 win - recoil? [Re: 500Nitro]
#224896 - 07/02/13 02:23 AM

I have a Garand (30-06) with a steel butt plate. It is not that bad.

--------------------
Life is how you pass the time between hunting trips.
Sometimes I do not express myself properly in the English language, please forgive me, I am just a boertjie.
Jaco Human
jacohu@mweb.co.za
SA Hunting Experience

Post Extras:

AndyB
.224 member

Reged: 13/09/12
Posts: 27
Loc: Europe

Re: Steel buttcap on .308 win - recoil? [Re: SAHUNT]
#224900 - 07/02/13 04:14 AM

Great! thanks for the input! I guess I'll give it a try and see how it goes.

Post Extras:

tophet1
.400 member

Reged: 15/09/07
Posts: 1873
Loc: NSW, Australia

Re: Steel buttcap on .308 win - recoil? [Re: AndyB]
#224909 - 07/02/13 07:41 AM

Wear a shirt and just pull the rifle into your shoulder and you won't notice.

Post Extras:

kuduae
.400 member

Reged: 13/01/10
Posts: 1792
Loc: middle of Germany

Re: Steel buttcap on .308 win - recoil? [Re: tophet1]
#224913 - 07/02/13 08:04 AM

Several of my rifles, fi Mannlicher-Schoenauers in .30-06, 8x60 Magnum(S), 9.5x57 M-Sch, or a dr in .500-450 #1 BPE have steel traap-door buttplates. All with more recoil than a .308 WIN. Never noticed recoil when hunting.

--------------------
German foresters: We like sustainability! For merely 300 years by 2013.

Post Extras:

Mike_Bailey
.400 member

Reged: 26/02/07
Posts: 2289
Loc: GB

Re: Steel buttcap on .308 win - recoil? [Re: kuduae]
#224936 - 07/02/13 07:59 PM

I have one on my .500 NE. If the stock fits and you hold it tight, no problems. I weigh 150lbs, best, Mike p.s I doubled it once and still no pain, a bit disorientating though

Post Extras:

Mike_Bailey
.400 member

Reged: 26/02/07
Posts: 2289
Loc: GB

Re: Steel buttcap on .308 win - recoil? [Re: Mike_Bailey]
#224938 - 07/02/13 08:05 PM

p.s. my .375 and 30.06 all have them as well, best

Post Extras:

mauserand9mm
.400 member

Reged: 03/09/09
Posts: 1039
Loc: Queensland, Australia

Re: Steel buttcap on .308 win - recoil? [Re: Mike_Bailey]
#224939 - 07/02/13 08:38 PM

I have a few ex-mil Mausers with the original stocks and steel buttplates. (I have a 308, 8mms and a 30/06.) I don't notice it when I fire them but after a shooting session (anywhere between 20 and 50 rounds), my shoulder is red and very slightly tender. Never turns into a bruise though, and doesn't put me off shooting them.

Post Extras:

mauserand9mm
.400 member

Reged: 03/09/09
Posts: 1039
Loc: Queensland, Australia

Re: Steel buttcap on .308 win - recoil? [Re: Mike_Bailey]
#224941 - 07/02/13 08:40 PM

Quote:

I have one on my .500 NE. If the stock fits and you hold it tight, no problems. I weigh 150lbs, best, Mike p.s I doubled it once and still no pain, a bit disorientating though

I always wondered what damage (to the shooter) doubling a 500NE would do. I see you can still type okay

The rifle in question wasn't a Merkel was it?

Post Extras:

albertan
.333 member

Reged: 13/06/06
Posts: 432
Loc: Alberta, Canada

Re: Steel buttcap on .308 win - recoil? [Re: mauserand9mm]
#224943 - 07/02/13 08:51 PM

My biggest problem with metal or even hard plastic butt plates is that they slip around much more than a rubber butt plate. With scoped rifles, the hard butt plates can jar scopes more than a rifle with a recoil pad when you set the rifle down butt end first. Then there is the issue of the kick.

Post Extras:

Mike_Bailey
.400 member

Reged: 26/02/07
Posts: 2289
Loc: GB

Re: Steel buttcap on .308 win - recoil? [Re: albertan]
#224946 - 07/02/13 10:38 PM

mauserand9mill, no it wasn´t a Merkel, albertan, the plate should be chequered, then no problem IMO
best

Post Extras:

AndyB
.224 member

Reged: 13/09/12
Posts: 27
Loc: Europe

Re: Steel buttcap on .308 win - recoil? [Re: Mike_Bailey]
#224947 - 08/02/13 12:14 AM

Thanks for the scope/checkering comment Albertan and Mike, I have to admit I didnt give that a single thought!

Post Extras:

Huvius
.416 member

Reged: 04/11/07
Posts: 3554
Loc: Colorado

Re: Steel buttcap on .308 win - recoil? [Re: AndyB]
#224953 - 08/02/13 02:47 AM

A lot of good advice here regarding steel butt plates.
My 360No.2 and my 425 Westley have steel butts. Both are pretty sharp in the recoil department but have not bruised my shoulder even when putting 10-15 rounds downrange.
My 461Gibbs has one as well and is the worst in felt recoil of the three.
IMO, a .308 should be a breeze to shoot if you follow the advice given above.

--------------------
He who lives in the past is doomed to enjoy it.

Post Extras:

xausa
.400 member

Reged: 07/03/07
Posts: 2037
Loc: Tennessee, USA

Re: Steel buttcap on .308 win - recoil? [Re: Huvius]
#224968 - 08/02/13 08:19 AM

My .358 Winchester built on a 1937 Oberndorf Mauser action has a checkered steel Niedner buttplate and the recoil has never bothered me in the slightest.

Post Extras:

albertan
.333 member

Reged: 13/06/06
Posts: 432
Loc: Alberta, Canada

Re: Steel buttcap on .308 win - recoil? [Re: xausa]
#224969 - 08/02/13 08:32 AM

In Alberta we are required to wear heavy clothing when hunting more often than not. Without a rubber recoil pad a denim, polar fleece,or Carhart jacket will make the rifle slip around like the pad is made up of ball bearings. The number of quality rubber recoil pads I have had installed on rifles has to be approaching 20. Slip around they do with certain clothing.

Post Extras:

DarylS
.700 member

Reged: 10/08/05
Posts: 26977
Loc: Beautiful British Columbia, Ca...

Re: Steel buttcap on .308 win - recoil? [Re: albertan]
#224975 - 08/02/13 01:42 PM

Worn out military steel or brass pads aside, the checkered butt plates like the Neidner, stick just as well as rubber.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras:

alexbeer
.333 member

Reged: 10/04/08
Posts: 389
Loc: Tasmania, Australia

Re: Steel buttcap on .308 win - recoil? [Re: Mike_Bailey]
#224981 - 08/02/13 05:52 PM

Quote:

If the stock fits

Agree 100% with Mike.

Some time ago I built a gentleman a 98 Mauser in 9.3x62 that he wanted fitted with a skeleton butt plate and flat top checkering inside it. The finished rifle weighed about 7-1/2lbs all up and it was correctly fitted my client (fitted me pretty well too for that matter). Even in just a thin cotton shirt, when I zeroed the three rear sight leaves, all in one sitting (one full packet of Norma 286 grain Onyx) there were no real problems at all. I ended up with just a slight red patch right where the toe sat in my shoulder, thats all. I am a little fuller (fatter

) there than my client.

So, as Mike says, if the stock fits and you hold it right, you should have no problems with a steel butt plate on a 308 hunting rifle.

My two cents worth...

Best
ALEX

--------------------

Details matter!

Post Extras:

AndyB
.224 member

Reged: 13/09/12
Posts: 27
Loc: Europe

Re: Steel buttcap on .308 win - recoil? [Re: alexbeer]
#225049 - 10/02/13 05:09 AM

It seems that I have to check price ranges for some pattern or checkering on the buttplate. Possibly some "pull-over" as I probably need to build up the comb to use a scope anyway. Thanks for all the responce!

Andy.

Post Extras:

Pages: 1

Extra information

0 registered and 13 anonymous users are browsing this forum.

Moderator:

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 7223

NitroExpress.com

Home | Ezine | Forums | Links | Contact