Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Winchester 1895 in 9.3x62

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

Pages: 1

RLI
.375 member

Reged: 01/10/03
Posts: 534
Loc: Victoria, Australia

Winchester 1895 in 9.3x62
#6543 - 05/01/04 07:15 PM

I have a Winchester 1895 in .270 Win. (modern reproduction) and I have heard that this rifle can be rebarreled to 9.3x62 ,Has anyone heard of this before and if so what would the pressure levels be compared to the .270 Win.? Thanks

RLI

--------------------
"Life is tough, but it's tougher when you're stupid." — John Wayne

Post Extras:

Far_Canel
.224 member

Reged: 02/01/04
Posts: 23

Re: Winchester 1895 in 9.3x62 [Re: RLI]
#6544 - 05/01/04 07:32 PM

Well they also bought them out in 30.06.
The old one were chambered in .303British,7.62x54R for Russia,30/40 and of course the 405 etc.
As long as there is enough metal left around the chamber.
The lever actions are not noted for their extraction however.

Regards,Shaun.

Edited by Far_Canel (05/01/04 11:56 PM)

Post Extras:

500Nitro
.450 member

Reged: 06/01/03
Posts: 7244
Loc: Victoria, Australia

Re: Winchester 1895 in 9.3x62 [Re: RLI]
#6549 - 05/01/04 11:45 PM

RLI,

"I have heard that this rifle can be rebarreled to 9.3x62"
This has actually already been done in the last 3 months.

"What would the pressure levels be compared to the .270 Win.?"

Probably a lot less as the .270 Win is one of the HOTTEST "Standard Factory" rounds available
- without checking I think it generates areound 55,000 psi.

500 Nitro

Post Extras:

luv2safari
.400 member

Reged: 09/11/03
Posts: 1408
Loc: United States

Re: Winchester 1895 in 9.3x62 [Re: RLI]
#7273 - 22/01/04 05:22 PM

You could have the 270 rebored to 9,3x62. The cost would be about 70% that of re-barreling. I can't think of a better caliber for the '95!

--------------------
Hunt with Class and Classics

Post Extras:

atkinson6
.375 member

Reged: 26/01/04
Posts: 678
Loc: Idaho

Re: Winchester 1895 in 9.3x62 [Re: luv2safari]
#7581 - 28/01/04 10:13 AM

I see no problem with such a conversion and I doubt that any action work would be needed to make one feed, but perhaps a little would be required..I would rebarrel as reboring cost just as much or at least the folks I know charge just as much, and you get blessed with a 3 year wait on most rebores.....

Post Extras:

DPhillips
.375 member

Reged: 09/10/03
Posts: 819
Loc: Alaska

Re: Winchester 1895 in 9.3x62 [Re: atkinson6]
#7587 - 28/01/04 11:26 AM

I think Ray is correct. When I was contemplating my 411 Hawk on the 95, Fred Zeglin said he didn't feel that there was enough barrel on my 270 to rebore to anything over 35 cal. I guess the rear sight dovetail is cut pretty deep.

For what it's worth.

Post Extras:

mickey
.416 member

Reged: 05/01/03
Posts: 4647
Loc: Pend Oreille Valley, Idaho

Re: Winchester 1895 in 9.3x62 [Re: DPhillips]
#7595 - 28/01/04 01:34 PM

I have long contimplated a 9.3 in a BLR. Now that I have aquired a Mod 95 in 405 I'm think that it will go on the back burner until I see if the 95 works out.

--------------------
Lovu Zdar
Mick

A Man of Pleasure, Enterprise, Wit and Spirit Rare Books, Big Game Hunting, English Rifles, Fishing, Explosives, Chauvinism, Insensitivity, Public Drunkenness and Sloth, Champion of Lost and Unpopular Causes.

Post Extras:

vigillinus
.300 member

Reged: 11/12/03
Posts: 115

Re: Winchester 1895 in 9.3x62 [Re: mickey]
#13222 - 08/04/04 02:01 PM

A better idea would be to redo a .35 Whelen Remington 7600.

Post Extras:

mickey
.416 member

Reged: 05/01/03
Posts: 4647
Loc: Pend Oreille Valley, Idaho

Re: Winchester 1895 in 9.3x62 [Re: vigillinus]
#13241 - 09/04/04 11:28 AM

I don't care for the 7600s. I have a 760 carbine in 3006 that I thought about but, while it shoots okay, it is a bit clanky. Too much for a horse rifle I think.

It does make a nice rifle for the pick 'em up truck.

--------------------
Lovu Zdar
Mick

A Man of Pleasure, Enterprise, Wit and Spirit Rare Books, Big Game Hunting, English Rifles, Fishing, Explosives, Chauvinism, Insensitivity, Public Drunkenness and Sloth, Champion of Lost and Unpopular Causes.

Post Extras:

RLI
.375 member

Reged: 01/10/03
Posts: 534
Loc: Victoria, Australia

Re: Winchester 1895 in 9.3x62 [Re: vigillinus]
#13252 - 09/04/04 06:59 PM

Do Remington still make a .35 Whelen in the 7600, I have thinking of getting one. Thanks

RLI

--------------------
"Life is tough, but it's tougher when you're stupid." — John Wayne

Post Extras:

mart
.300 member

Reged: 20/01/04
Posts: 107
Loc: Alaska

Re: Winchester 1895 in 9.3x62 [Re: RLI]
#15259 - 27/05/04 04:41 PM

RLI,

I don't see why this wouldn't be a great idea. The 9.3x62 runs lower pressure than the 270. How much lower I am not sure. I saw a beautiful 95 at Wild West Guns in Anchorage that was a switch barrel, 30-06 and 35 Whelen. I know they have been barreled in everything up to 411 Hawk, so the 9.3x62 would be a great pairing of rifle and cartridge. Mart.

Post Extras:

RLI
.375 member

Reged: 01/10/03
Posts: 534
Loc: Victoria, Australia

Re: Winchester 1895 in 9.3x62 [Re: mart]
#15263 - 27/05/04 06:54 PM

Mart,
I have aquired a .405Win in a 1895 and the 9.3x62 is on hold for a while but I know of 2 other 1895 that have been converted to 9.3 with no problems and every one is impressed with this combination
RLI

--------------------
"Life is tough, but it's tougher when you're stupid." — John Wayne

Post Extras:

Pages: 1

Extra information

1 registered and 117 anonymous users are browsing this forum.

Moderator:

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 4763

NitroExpress.com

Home | Ezine | Forums | Links | Contact