Home | Ezine | Forums | Links | Contact
NitroExpress.com: 338-378 WM Velocity

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

Pages: 1
elvas
.275 member


Reged: 18/04/06
Posts: 65
Loc: Thessaloniki, GREECE
338-378 WM Velocity
      #225877 - 24/02/13 09:23 AM

Does anyone have a 338-378 WM rifle?
If so, what is the actual muzzle velocity of factory 200 grain bullets?
Thank you.

Lefteris
www.europeancartridgeunlimited.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
albertan
.333 member


Reged: 13/06/06
Posts: 432
Loc: Alberta, Canada
Re: 338-378 WM Velocity [Re: elvas]
      #225931 - 25/02/13 07:56 AM

Weatherby claims 3380 fps with a 200 grain bullet. They claim 3060 fps out of the old .300 Weatherby for comparison.

You need a muzzle break to cut the recoil down on such a monster. I will never use a muzzle break personally, nor will I hunt with anyone who has one fixed on their rifle. Even if I like the person. They hurt.


Post Extras: Print Post   Remind Me!   Notify Moderator  
elvas
.275 member


Reged: 18/04/06
Posts: 65
Loc: Thessaloniki, GREECE
Re: 338-378 WM Velocity [Re: albertan]
      #225939 - 25/02/13 10:37 AM

albertan,
Thank you for the reply.
I was hoping to know about actual velocity of the factory load, fired through a production gun.
We are experimenting with a lightweight 200 grain, 12 ga slug and received 3000 f/s, loaded in 3" hulls.
Since the 338-378 WM with a 200 grain bullet is the fastest factory cartridge with such a bullet weight, I was thinking if we could reach or surpass its velocity using 3.5" hulls.
I agree with you about muzzle brakes. Don't like them either. But, a 200 grain slug at 3000 f/s from a 7.7 lbs Benelli Nova shotgun does not kick appreciably, I would say.

Lefteris
www.europeancartridgeunlimited.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 27093
Loc: Beautiful British Columbia, Ca...
Re: 338-378 WM Velocity [Re: elvas]
      #225946 - 25/02/13 04:52 PM

Lefteris - check out Ed Huble's thread here called 12 bore from Hell. There you will find data for 12 bores running much heavier slugs at 3,000fps or more.
It's quite long, but the data is very impressive.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
elvas
.275 member


Reged: 18/04/06
Posts: 65
Loc: Thessaloniki, GREECE
Re: 338-378 WM Velocity [Re: DarylS]
      #225951 - 25/02/13 06:43 PM

Thank you Daryl,
I have read the 12gaFH thread and Ed did a lot of work with the 12ga with impressive results.
Difference is that we have to keep everything under the CIP's maximum pressure for the 12ga (under 1050 bar) so that they could be used by anyone with an off the shelve shotgun.

Lefteris
www.europeancartridgeunlimited.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
elvas
.275 member


Reged: 18/04/06
Posts: 65
Loc: Thessaloniki, GREECE
Re: 338-378 WM Velocity [Re: elvas]
      #227216 - 19/03/13 09:38 AM

We achieved 3375f/s with the Lightning 12 slug (200 grains) loaded in 3" hulls in a Benelli Nova shotgun with 24" smoothbore barrel.
I read that shooters feel that a 338-378 WM rifle has a lot of kick. In a 7.7lbs shotgun kick is almost non existent even shooting off bench.

Lefteris
www.europeancartridgeunlimited.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
1 registered and 100 anonymous users are browsing this forum.

Moderator:   

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2773

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved