Home | Ezine | Forums | Links | Contact
NitroExpress.com: Regarding the W & C Scott project...

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
MacNaughton360
.275 member


Reged: 10/12/07
Posts: 99
Loc: Indiana, USA
Regarding the W & C Scott project...
      #96961 - 18/02/08 03:41 AM

If you were to want to turn .45 caliber sleeves to slip into the barrels on the W & C Scott hammer gun I have, where would you get them? Any suggestions for sources?
What type of rifling and rate of twist should I look for to use with 45-70 black powder loads?
I have molds for .458 diameter bullets ranging from 550 grains down to 305 grains, and a number of them in between, I’m considering setting the gun up for the 305’s but other suggestions would be helpful.
Thanks for your thoughts and suggestions, MacNaughton360.

Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 27000
Loc: Beautiful British Columbia, Ca...
Re: Regarding the W & C Scott project... [Re: MacNaughton360]
      #96962 - 18/02/08 03:53 AM

I'd get 18" twists, but anything up to 22"will actually work. The faster twists are better for heavier bullets for long range is all and a double would't be used for that.
; You will be safer in the accuracy deparment with 18" to 20" of twist.
; Check www.trackofthewolf.com for liner diameters. What gauge is the shotgun? They have liners of various diamters, sold by the inch. They also have barrels of various sizes and lengths. The Green Mountain barrels are accurate, well made and won't break the bank.
; To keep the weight down, swamping the liners might be a consideration as was done by a guy on this site some time ago. Perhaps you can do a search for the excellent pictures and methods they used?

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
0 registered and 87 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 230

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved