Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 577 Ne 2 3/4" information

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles

Pages: 1 | 2 | >> (show all)

dino_hunter
.224 member

Reged: 23/10/07
Posts: 10
Loc: Norway

577 Ne 2 3/4" information
#87787 - 26/10/07 01:32 AM

Hello all

Are there anyone who have hunting information about the .577 2 2/4" N.E?

Can it be used with modern loads and good solids in africa today?

Regards

dino_hunter

Post Extras:

empirevr
.375 member

Reged: 03/09/06
Posts: 614
Loc: England,but now Italy.

Re: 577 Ne 2 3/4" information [Re: dino_hunter]
#87796 - 26/10/07 03:30 AM

Hi

Whats with the nick?

Marrakai will tell you all about 577x 2.75"

All the best

Ben

Post Extras:

peter
removed

Reged: 11/04/07
Posts: 1493
Loc: denmark

Re: 577 Ne 2 3/4" information [Re: empirevr]
#87801 - 26/10/07 05:29 AM

hi dino

we got a very good guy here, who hunts with a 577 2 3/4 ne

look at his writings here http://www.hotkey.net.au/~orrs/Marrakai

or wait for a few days then im sure he will be on this....

the story you need to look for will be the fat lady, enjoy he is a good writer.

peter

Post Extras:

Marrakai
.416 member

Reged: 09/01/03
Posts: 3595
Loc: Darwin, Top End of Australia

Re: 577 Ne 2 3/4" information [Re: peter]
#87812 - 26/10/07 07:54 AM

OK, OK...!

Here's my opinion on the cartridge.

...again!

In truth, I'm happy to post this as often as NE.com members will tolerate!

My love-affair with the cartridge continues to increase every time I take that Greener double afield.

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au

Post Extras:

dino_hunter
.224 member

Reged: 23/10/07
Posts: 10
Loc: Norway

Re: 577 Ne 2 3/4" information [Re: peter]
#87889 - 27/10/07 04:14 PM

Hi Peter

Thank you for the information

dino

Post Extras:

dino_hunter
.224 member

Reged: 23/10/07
Posts: 10
Loc: Norway

Re: 577 Ne 2 3/4" information [Re: Marrakai]
#87890 - 27/10/07 04:16 PM

Hi Marrakai

Thank you for all the help and great information.

Have send you a pm

Have a good day

dino

Post Extras:

dino_hunter
.224 member

Reged: 23/10/07
Posts: 10
Loc: Norway

Re: 577 Ne 2 3/4" information [Re: Marrakai]
#87891 - 27/10/07 04:39 PM

Thank you all for the information regarding the short .577 NE.

Good to se that I am not the only one, who think it is a great caliber. I think kit will be a good caliber to take to Africa today to. It has more power than the .404 Jeffery, .416 Rigby, .470 Ne and many many more, who are used everyday in Africa, after all games, and yes, I think it will be a good caliber to use even after elephants.

Dino_hunter

Post Extras:

peter
removed

Reged: 11/04/07
Posts: 1493
Loc: denmark

Re: 577 Ne 2 3/4" information [Re: dino_hunter]
#87897 - 27/10/07 09:31 PM

your wellcome dino

and wellcome to the site by the way, come on in and have fun. do you have a 577 allready or are you just looking around before you put down the cash. if you have one allready we all crave pictures here on the site.

peter

Post Extras:

rigbymauser
.400 member

Reged: 15/05/05
Posts: 1972
Loc: Denmark

Re: 577 Ne 2 3/4" information [Re: Marrakai]
#87898 - 27/10/07 09:53 PM

Quote:

OK, OK...!

Here's my opinion on the cartridge.

...again!

In truth, I'm happy to post this as often as NE.com members will tolerate!
My love-affair with the cartridge continues to increase every time I take that Greener double afield.

I can read your opinion everyday if I have to...

!!
Love those articals man...

I wonder if a Lite .577 Nitro could be made on a 12 gauge Sauer & Sohn shotgun action with greener crossbolt??

Edited by rigbymauser (27/10/07 09:54 PM)

Post Extras:

dino_hunter
.224 member

Reged: 23/10/07
Posts: 10
Loc: Norway

Re: 577 Ne 2 3/4" information [Re: peter]
#87906 - 28/10/07 09:10 AM

Hi Peter

Yes, when I get it, I will post information and pic here. But, yes, I am seeking to have one made for me. The moose in Norway are VERY BIG! Hehhehe.

I am going to have dp made for me, and I am thinking of the short .577 NE. Think it got all th epower I need, and for all the hunting I will do, in Africa, Australia and Norway..

dino

Post Extras:

DoubleD
.400 member

Reged: 23/11/03
Posts: 2437
Loc: Retired in Oklahoma

Re: 577 Ne 2 3/4" information [Re: dino_hunter]
#87909 - 28/10/07 10:59 AM

I know that Marrakai's gun is about 1-14 or 15 twist.

I see Pac Nor has a 1-18 twist barrel. Anybody else supply barrels?

What would be a good twist for this cartridge?

I think this cartridge would make a good round to put on a Martini for shooting whitetails out of weed patches in Montana Stubblefields.

--------------------
DD, Ret.

Post Extras:

mickey
.416 member

Reged: 05/01/03
Posts: 4647
Loc: Pend Oreille Valley, Idaho

Re: 577 Ne 2 3/4" information [Re: DoubleD]
#87912 - 28/10/07 12:59 PM

d h

I would recommend the 750 grain bullet instead of the 650. It is more suitable for Africa and will still kill a Moose.

--------------------
Lovu Zdar
Mick

A Man of Pleasure, Enterprise, Wit and Spirit Rare Books, Big Game Hunting, English Rifles, Fishing, Explosives, Chauvinism, Insensitivity, Public Drunkenness and Sloth, Champion of Lost and Unpopular Causes.

Post Extras:

hoppdoc
.400 member

Reged: 02/03/06
Posts: 1791
Loc: Southeastern USA

Re: 577 Ne 2 3/4" information [Re: mickey]
#87916 - 28/10/07 02:26 PM

I think the 750 traveling at 1850 giving ~5750 ft/pnds energy + good penetration would be devastating.

Actually if a flat nose 700 grainer were developed it would be great to get the velocity up a smidge and still penetrate. The SD may be tolerable as well.

I would love to see a current manufacturor build such a Double.The Demand would be considerable!!!

--------------------
An armed man is a citizen of his country, an unarmed man just a subject.

Post Extras:

dino_hunter
.224 member

Reged: 23/10/07
Posts: 10
Loc: Norway

Re: 577 Ne 2 3/4" information [Re: hoppdoc]
#87924 - 28/10/07 10:21 PM

Hi all

Thanks for all the information. Well, a 750 gr. bullet at 1800 or so fps is A great bullet. I think it will be good on all game in africa and australia to. And, that makes it good for the moose to.

dino

Post Extras:

BigFiveJack
.333 member

Reged: 25/12/05
Posts: 256
Loc: Half hour North of Tampa Bay F...

Re: 577 Ne 2 3/4" information [Re: hoppdoc]
#89261 - 19/11/07 06:28 AM

I'll bet Gerard at www.gscustom.co.za would

do a flat nose at 700 grainer in .585 diameter.

He does it at 650 grn and 750 grn right NOW!.

--------------------
Cordially,
Jack

NRA Endowment Member
DRSS Member

Post Extras:

hoppdoc
.400 member

Reged: 02/03/06
Posts: 1791
Loc: Southeastern USA

Re: 577 Ne 2 3/4" information [Re: BigFiveJack]
#89270 - 19/11/07 08:59 AM

Wow!!

Imagine a 577 lite in a 10.5 pnd Double with 700 gr GS Custom solids @1900 fps(5600 ftpnds energy) and 650 gr Woodleigh softs-- That should handle most anything below Ele with great penetration and stop Ele in a pinch(700 gr-SD-.300)although no doubt more velocity would be better for Ele penetration(ie recall previous 500 gr 458 WM Ele failures @ <2000fps).The FN feature may help penetration as well.

I would probably choose a different Double if exclusively Ele hunting-probably a 500 NE with FN banded bullets for the additionsl penetration over a 577 lite.For Buff and the rest the 577lite should be fine!!

--------------------
An armed man is a citizen of his country, an unarmed man just a subject.

Post Extras:

bwana600nitro
.224 member

Reged: 13/02/06
Posts: 41
Loc: San Antonio, Texas

Re: 577 Ne 2 3/4" information [Re: hoppdoc]
#89275 - 19/11/07 11:22 AM

I had a full tilt 577 3" and I can tell you it is a awesome cart, but at almost 14lbs was a pain in the ass (more like arms).

I think the 577 2 3/4 would be an awesome round built at 10 to 10.5 lbs with GS custom 640 grain at 1850 to 1900 fps. Would still wack you a bit, but I'd bet it would be death on anything shot with it. I would like a modern double in this caliber priced in the 450-470 class price. If Butch would build a double with a rigby style forend lever for about 12-15K he would get an order form me. I dont think he intrested though!

Ed

--------------------
"The big ones look big" Jack O'Conner

Post Extras:

BigFiveJack
.333 member

Reged: 25/12/05
Posts: 256
Loc: Half hour North of Tampa Bay F...

Re: 577 Ne 2 3/4" information [Re: bwana600nitro]
#89280 - 19/11/07 12:56 PM

Quote:

Ed: "...rigby style forend lever..."

Where is there a picture of such a lever please?

--------------------
Cordially,
Jack

NRA Endowment Member
DRSS Member

Post Extras:

bwana600nitro
.224 member

Reged: 13/02/06
Posts: 41
Loc: San Antonio, Texas

Re: 577 Ne 2 3/4" information [Re: BigFiveJack]
#89285 - 19/11/07 02:36 PM

Look at the Fuchs 577 double sidelock under the double rifle pics section of this forum. Thats the type of forend lever.

Ed

--------------------
"The big ones look big" Jack O'Conner

Post Extras:

BigFiveJack
.333 member

Reged: 25/12/05
Posts: 256
Loc: Half hour North of Tampa Bay F...

Re: 577 Ne 2 3/4" information [Re: bwana600nitro]
#89304 - 20/11/07 01:43 AM

Ed,

I am pretty sure that "screw type"

lever is a Philip Webley patent.

--------------------
Cordially,
Jack

NRA Endowment Member
DRSS Member

Post Extras:

bwana600nitro
.224 member

Reged: 13/02/06
Posts: 41
Loc: San Antonio, Texas

Re: 577 Ne 2 3/4" information [Re: BigFiveJack]
#89314 - 20/11/07 05:32 AM

BFJ,

I dont know why you would call a forend lever a "screw type"? I think you are getting the action mixed up the other parts of the rifle, look up on Hallowell & Company for the different terms, its a great reference.

As far as I know there are 3 major types of forend releases, the Anson push button, Delely (sp) lever and the Lever release ( or as I've always heard it called the "Rigby style forend lever")

Maybe someone here with more experence than me can clarify.

Ed

--------------------
"The big ones look big" Jack O'Conner

Edited by bwana600nitro (20/11/07 05:34 AM)

Post Extras:

Marrakai
.416 member

Reged: 09/01/03
Posts: 3595
Loc: Darwin, Top End of Australia

Re: 577 Ne 2 3/4" information [Re: bwana600nitro]
#89376 - 20/11/07 11:01 PM

The so-called Rigby-style fore-end latch was patented by Charles Harvey of Wilkinson's (later Wilkinson Sword) in 1866. It was much favoured and widely used by John Rigby (and Thomas Horsley, BTW) but not invented by him.

During the ‘Golden Years’ of double-gun development, there were some 29 patents for different fore-end fasteners registered in Britain alone! The three listed by Ed above are by far the most commonly encountered patterns.

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au

Post Extras:

CptCurl
.450 member

Reged: 01/05/04
Posts: 5284
Loc: Fincastle, Botetourt County, V...

Re: 577 Ne 2 3/4" information [Re: Marrakai]
#89378 - 20/11/07 11:35 PM

You ask for photos?

Here are photos of three. On the left, a Charles Lancaster .280NE (a Webley PHV-1); middle, a George Gibbs .450NE (a Webley A&W-C); and right, a 12 bore Horsley double rifle.

Curl

Post Extras:

bwana600nitro
.224 member

Reged: 13/02/06
Posts: 41
Loc: San Antonio, Texas

Re: 577 Ne 2 3/4" information [Re: CptCurl]
#89390 - 21/11/07 02:31 AM

Thanks guys,

Looks good I love this option on my Douglass, I wish more makers would use this as the forend attachment. It is a very positive strong attachment.

Ed

--------------------
"The big ones look big" Jack O'Conner

Post Extras:

JabaliHunter
.400 member

Reged: 16/05/07
Posts: 1958
Loc: England

Re: 577 Ne 2 3/4" information [Re: bwana600nitro]
#89550 - 23/11/07 06:53 AM

Quote:

the 577 2 3/4 would be an awesome round built at 10 to 10.5 lbs with GS custom 640 grain at 1850 to 1900 fps. Would still wack you a bit, but I'd bet it would be death on anything shot with it.

Is the recoil on a par with the .450/.470 class rifles? As a Buffalo cartridge, how important is the 1850 to 1900 fps as opposed to lower BP type velocities (1650-1800fps)?

Post Extras:

Pages: 1 | 2 | >> (show all)

Extra information

1 registered and 806 anonymous users are browsing this forum.

Moderator: CptCurl

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 18010

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact