Home | Ezine | Forums | Links | Contact
NitroExpress.com: A cartridge question of sorts...

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
EDELWEISS
.375 member


Reged: 22/11/05
Posts: 608
Loc: Gettysburg
A cartridge question of sorts...
      #86275 - 27/09/07 11:40 PM

I was fooling around with some of the Magtech brass cases and happened to put a 58cal Minnie ball into a 28 gauge case. When it fit pretty close (better with a paper patch), I started scheeeming about a "new" BP round.

If a shotgun could be sleeved for tubes chambered for the 28ga case and rifled for the 58 minnie ball loaded for moderate pressures, there might be a "do-able" big bore thumper with some old school flavor.

Im thinking a 20ga wouldnt allow enough room for proinserts and rifling, so a 16ga may be a better option. My scheeeeeming involved keeping reloading as easy as possible, without the need for a press. A old style base with punch to remove the spent primer and replace with a new one, add powder and press fit??? a minnie.

At this "GUESS" point I was thinking a load of about 80 to 100 grains, but I havent measured the case capacity to see whats possible. I used the minnies because they were handy, then I started thinking that the as hollow base expans might offer some advantages.

Let me be the first to admit that I have no idea where or how to start with this idea, OR ofcourse if its worth doing. I would appreciate any suggestions.

--------------------
If it's not custom, it's just borrowed

Post Extras: Print Post   Remind Me!   Notify Moderator  
peter
removed


Reged: 11/04/07
Posts: 1493
Loc: denmark
Re: A cartridge question of sorts... [Re: EDELWEISS]
      #86279 - 28/09/07 12:33 AM

depending on lenght of the case that would be a 577bpe of X lenght just be careful of ballon head cases because thats what i found when i did my search, as far as i know that is how many people make the snider, round just with the right projectile.
gotto love 577 in all lenghts...

peter

Post Extras: Print Post   Remind Me!   Notify Moderator  
beleg2
.375 member


Reged: 15/08/07
Posts: 591
Loc: Bahía Blanca - Argentina
Re: A cartridge question of sorts... [Re: peter]
      #86291 - 28/09/07 06:15 AM

Edelweiss,
You are reinventing the .577 Snider. LOL
You can get much info about the same cartridge but with 24ga cases at:

http://p223.ezboard.com/bbritishmilitariaforums

Martin

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
0 registered and 54 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 441

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved