Home | Ezine | Forums | Links | Contact
NitroExpress.com: Lee-Speed Related Question

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Lee Speed Forum & Archive

Pages: 1
Sandgroper
.224 member


Reged: 30/07/07
Posts: 5
Loc: Narrogin, Western Australia
Lee-Speed Related Question
      #85819 - 18/09/07 12:21 AM

I understand BSA Lee-Speed rifles were chambered in .303, 7x57R, 8x57R,.375NE, and .405 Winchester. I would like to build something similar on a No1 Mk3 action in either .375NE or .405 Winchester. Will a standard SMLE magazine require modification to function properly with these cartridges?

Post Extras: Print Post   Remind Me!   Notify Moderator  
ALAN_MCKENZIE
.400 member


Reged: 24/03/04
Posts: 1214
Loc: Western Australia
Re: Lee-Speed Related Question [Re: Sandgroper]
      #85824 - 18/09/07 12:54 AM

Give Doug Barnes a ring.
That way you are talking to the gunsmith who will probably do the job for you here in WA.
Al

--------------------
"Dogs always bark at their master"
Sir Seretse Khama.25th June 1949


Post Extras: Print Post   Remind Me!   Notify Moderator  
mehulkamdar
.416 member


Reged: 09/01/04
Posts: 3688
Loc: State of Ill-Annoy USA.
Re: Lee-Speed Related Question [Re: ALAN_MCKENZIE]
      #86170 - 25/09/07 12:25 PM

Alan,

Would you have any pics of the new custom Lee Speeds being made these days? I must salute you Aussies for keeping a great tradition alive!

--------------------
The Ark was made by amateurs. Experts built the Titanic.

Mehul Kamdar


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rolland
.333 member


Reged: 31/12/06
Posts: 281
Loc: Camp Verde, AZ
Re: Lee-Speed Related Question [Re: Sandgroper]
      #86172 - 25/09/07 04:15 PM

This is one I built from a surplus No1 Mk 3 actually it is built out of parts I had left over. I used a Boyd stock. It shoots really well.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Sandgroper
.224 member


Reged: 30/07/07
Posts: 5
Loc: Narrogin, Western Australia
Re: Lee-Speed Related Question [Re: Rolland]
      #86187 - 25/09/07 10:32 PM

Nice rifle!! Thanks for sharing.

Post Extras: Print Post   Remind Me!   Notify Moderator  
mehulkamdar
.416 member


Reged: 09/01/04
Posts: 3688
Loc: State of Ill-Annoy USA.
Re: Lee-Speed Related Question [Re: Rolland]
      #86210 - 26/09/07 11:20 AM

Rolland,

That is a beautiful rifle!

Are you a gunsmith or is this a hobby? I hope you don't mind my asking...

Good hunting!

--------------------
The Ark was made by amateurs. Experts built the Titanic.

Mehul Kamdar


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rolland
.333 member


Reged: 31/12/06
Posts: 281
Loc: Camp Verde, AZ
Re: Lee-Speed Related Question [Re: mehulkamdar]
      #86217 - 26/09/07 02:19 PM

mehulkamdar
Since I don't make much money at it I consider it a hobby. Since I retired I have to have something to do. I built a couple of 45-70's on that action and had some parts and pieces left over so one thing led to another and I kept seeing photos of Lee Speed rifles in .303 and this came about. Thank youi for the compliment, hope to get it checkered soon.

Edited by Rolland (26/09/07 02:22 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rick_R
.300 member


Reged: 03/07/03
Posts: 117
Loc: WV, USA
Re: Lee-Speed Related Question [Re: Rolland]
      #86260 - 27/09/07 01:00 PM

Rolland,
Nice rifle

How do able is a No1 Mk3 in 7x57R (.275RR Rigby Rimmed?) ?

Might be a fun rifle to shoot...


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rolland
.333 member


Reged: 31/12/06
Posts: 281
Loc: Camp Verde, AZ
Re: Lee-Speed Related Question [Re: Rick_R]
      #86261 - 27/09/07 02:06 PM

In my opinion (?) that would be a dandy conversion, the pressures are the same, according to my books altho I don't have a drawing on the 7 X 57R for a rim size. Hmmmmmmm. It would be close to a .303 I would think and if they can be altered to 45-70 the smaller should be doable.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Rick_R
.300 member


Reged: 03/07/03
Posts: 117
Loc: WV, USA
Re: Lee-Speed Related Question [Re: Rolland]
      #86280 - 28/09/07 12:38 AM

From what I found on the Net the 7x57R is rim is 0.01" smaller than the .303 rim. I'll try to find a better set of drawings before I decide.

Looks like I'll be presenting a new statement of need to the household CEO and budget committee.


Post Extras: Print Post   Remind Me!   Notify Moderator  
mehulkamdar
.416 member


Reged: 09/01/04
Posts: 3688
Loc: State of Ill-Annoy USA.
Re: Lee-Speed Related Question [Re: Rolland]
      #86296 - 28/09/07 10:51 AM

Rolland,

It must be great to have a retirement like yours, but then few would have the skill...

You just might find your hands full with work after making this admission on the forums. DOn't blame me for this, please.

I have to have a Lee Speed type rifle someday and a big bore ML. I know whom I am going to approach for both - two gentlemen on this forum.

Please do post pictures of your work whenever you make something new. Thanks and good hunting!

--------------------
The Ark was made by amateurs. Experts built the Titanic.

Mehul Kamdar


Post Extras: Print Post   Remind Me!   Notify Moderator  
Otto
.300 member


Reged: 15/09/05
Posts: 111
Loc: Arizona, USA
Re: Lee-Speed Related Question [Re: mehulkamdar]
      #86398 - 30/09/07 11:18 PM

A couple of thoughts:
The SMLE magazine will work well without mods for tapered cartridges up to, at least 35 Winchester.
The 35 Win, BTW, is a great caliber and much more capable than most. Larger straight cased calibers require a single stack mod to feed nicely...not trivial. Also, the magazine is a bit short , but still works for 35 and 405 Win.

For open sight SMLEs, the Parker Hale PH 16 receiver sight can be adapted, is much nicer than the Williams, and seems to be regularly listed on the auction sites. It's Brit origins and all steel construction are aesthetic necessities if you're going to the trouble and expense of making a nice sporting rifle out of a SMLE.

Otto


Post Extras: Print Post   Remind Me!   Notify Moderator  
mehulkamdar
.416 member


Reged: 09/01/04
Posts: 3688
Loc: State of Ill-Annoy USA.
Re: Lee-Speed Related Question [Re: Otto]
      #86416 - 01/10/07 08:52 AM

Otto,

Thank you very much. The views of experienced members are always greatly appreciated.

Please post pictures of your rifles whenever you find time. I can assure you that all of us would greatly appreciate your doing this whenever it happens.

Thank you very much once again and good hunting!

--------------------
The Ark was made by amateurs. Experts built the Titanic.

Mehul Kamdar


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
1 registered and 17 anonymous users are browsing this forum.

Moderator:  NitroX 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 3628

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved