Home | Ezine | Forums | Links | Contact
NitroExpress.com: "Mini Compendium of Big Bore Cartridges" by Dan McCarthy

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

Pages: 1 | 2 | >> (show all)
EzineAdministrator
.333 member


Reged: 25/12/02
Posts: 485
"Mini Compendium of Big Bore Cartridges" by Dan McCarthy
      #78060 - 06/05/07 03:31 AM


Mini Compendium of Big Bore Cartridges

by Daniel McCarthy
© 2004


Introduction


A big bore lineup (from left to right): 375 H&H, 505 Gibbs, 500 Nitro Express, 500 Jeffery, 500 A-Square, 550 Express, 550 Magnum, 585 Nyati, 577 Tyrannosaur, 600 Nitro Express, 600 Overkill, 700 Nitro Express.


Not for more than 100 years has there been such a surge in interest in big bore cartridges as there is today. This interest is fueled at least in part by the relative affordability of hunting game for which big bore cartridges are suitable. Such game is generally limited to thick-skinned dangerous game, namely cape buffalo, elephant, hippo on land, and white rhino. For half the cost of a typical new car, we can hunt cape buffalo and plains game. Trophy bull elephant can be hunted in several countries for less than the cost of a new truck, and rhinoceros can be hunted in South Africa for the same budget.

It is not necessary to be wealthy or even a high-income earner in order to afford dangerous game hunting in Africa. By scrupulously setting money aside and making a few personal sacrifices to cut expenses, such as giving up eating at restaurants, not buying tickets to professional sporting events, avoiding new or expensive cars and trucks, and by turning some of part of a gun collection into cash, almost every American wage earner will be able to afford a dangerous game hunt in Africa.

With the relative financial accessibility of thick-skinned dangerous game hunting comes a natural interest on the part of the sportsman in rifles and cartridges appropriate for that sport. Although none of us would suffer if our thick skinned dangerous game hunting were to be done exclusively with the 416 Rigby, 458 Lott and 470 Nitro Express, there is added excitement to shooting the largest and heaviest of bullets. But there is even more good news for the big bore fan. Prices for newly produced double rifles are at an all-time low with several fine offerings from Searcy, Heym, Merkel, Krieghoff and Sig coming in at around US$10,000. For a similar amount, a very nice big bore bolt rifle from several master craftsmen may also be acquired. Alternatively, there are some low-budget options for the big bore fan, which will result in a very functional big bore dangerous game rifle for about US$3000.

This article provides the reader with a summary of both factory and wildcat cartridges .50 caliber and larger that are suitable for use on thick skinned dangerous game. As a beginning proposition, cartridges that use bullets with a sectional density of less than .300 or which cannot achieve a velocity of close to 2000 f.p.s. have been omitted due to the inadequate penetration that results from those ballistics. These criteria require me to rule out any discussion of lever action cartridges and any discussion of 2 bore, 4 bore, 8 bore, 10 bore and 12 bore rifles. Although such guns may be fun projects, their poor penetration precludes them from serious consideration in a practical dangerous game rifle. Also, energy figures are not provided in this article because they are misleading. Thick skinned dangerous game do not seem to be much affected by the energy of the cartridge they are shot with, so it would be error to conclude that one cartridge would be more effective than another based solely on energy figures. Rest assured that all of the cartridges discussed in this article have plenty of power for dispatching elephant, buffalo or whatever else is on license. Just about any cartridge can be used to kill a cape buffalo with a properly placed broadside lung shot, as the tens of thousands of buffalo fallen to AK-47 rifles have proven. But stopping an enraged bull or penetrating to his vitals from a poor angle can test the limits of any cartridge. Elephant provide an even more difficult penetration challenge since a frontal brain shot on an elephant will require puncturing several feet of trunk and skull bone before the brain is reached. Likewise, buffalo shoulders and jawbones, and buffalo and elephant skulls are notorious for ruining bullets, so only quality monolithic solids or other premium nonexpanding bullets should be considered by those with an inclination toward self-preservation.

Each cartridge summarized below is discussed primarily from the point of view of building an affordable bolt-action rifle to use for thick skinned dangerous game hunting. Example loads and ballistics are shown. The nitro express cartridges are discussed for comparison purposes, even though they are typically available only in more expensive double rifles (the Heym and Hambrush bolt rifles being notable exceptions). I hope that all readers will have the chance to build or purchase a big bore rifle and hunt dangerous game with it, or at least be deterred by the mistakes of those of us who have.

--------------------

Ezine.NitroExpress.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
EzineAdministrator
.333 member


Reged: 25/12/02
Posts: 485
"Mini Compendium of Big Bore Cartridges" - .505 Gibbs [Re: Ezine]
      #78061 - 06/05/07 03:38 AM

continued

Mini Compendium of Big Bore Cartridges

by Daniel McCarthy
© 2004


505 Gibbs


The 505 Gibbs was designed by George Gibbs of London to provide big bore stopping power in a Mauser style bolt-action rifle. It is considered the king of the classic big bore cartridges and is gigantic in its dimensions. The actions that will properly handle the cartridge are gigantic as well, and the price tag for a rifle in this caliber has a Texas-sized price tag.



5 shot .505 Gibbs by riflemaker Ryan Breeding using Granite Mountain Arms action. This rifle combines tasteful beauty with deadly efficient performance at a reasonable price. The magazine box, follower, front and rear sights, stock and other parts are all made by Ryan in his workshop to achieve flawless function and impeccable quality.

The 550 Gibbs has an overall length of 3.85 inches, making it unsuitable for all but a few magnum actions. Those considering a .505 Gibbs would do well to use an action that has a bolt body diameter of more than 0.700" (which is standard in the model 70/model 98/ CZ550) because after the bolt face is opened up for the Gibbs 0.640" rim, there is just a very thin sliver of metal left on the bolt opposite the extractor. Starting with a larger diameter bolt at the outset, such as the 0.750" bolt found in Granite Mountain Arms magnum mauser actions, adds to the durability of the rifle. Another alternative is a P14 Enfield action since the P14 bolt has a left lug that extends beyond the boltface, providing extra metal opposite the extractor which can accommodate the Gibbs very large rim.

At first glance, the .505 Gibbs original factory ballistics of a 525 grain bullet at 2300 f.p.s. do not appear to offer much more power than a .458 Winchester Magnum. After all, it is just 25 more grains of bullet weight and 150 feet per second more velocity. However, the ballistics can be improved by stepping up to a 600 grain bullet at 2400 feet per second. Of course the Gibbs also has the advantage of greater bullet diameter than the .458.

At present, factory 505 Gibbs rifles are available from Reimer Johannsen (http://www.johannsen-jagd.de), Hartmann & Weiss and Heym (http://www.heym-waffenfabrik.de). CZ has announced that it will introduce a .505 Gibbs rifle at the Shot Show in 2005. Alternatively, master gunsmith Ryan Breeding of Palmdale, California (http://www.rbbigbores.com) offers a beautiful 5 shot .505 Gibbs bolt rifle, and custom gunmaker Joe Smithson of Provo, Utah turns out perfection in a 505 Gibbs on a Granite Mountain Arms action. Karl-Heinz Ritterbusch (http://www.jagdgewehre.com/eng/) offers top quality .505 rifles as well.

Most 505 Gibbs rifles made today are custom built by individual gunsmiths today with about a 1-2 year lead-time. It is a magnificent classic cartridge with wonderful stopping power. For those who wish to maximize the punch of a hunting rifle, even more potent combinations are discussed further below. Recoil from the .505 Gibbs is significant due to the heavy powder charges it uses. To control recoil, .505 Gibbs rifles should weigh 11 pounds or more.

On cape buffalo, the .505 Gibbs has been observed to have significantly more shock effect than anything in the .458 class, due to its greater bullet diameter. Performance on game of the .500 Jeffery, .500 AHR, and 500 A-Square will be essentially the same as the .505 Gibbs. The advantage of the .505 Gibbs is its classic design and standard dimensions without a rebated rim. The disadvantages include need for a very expensive magnum mauser action, periodic shortages of brass, sometimes inconsistent brass quality, and a relatively narrow selection of bullets for the .505" diameter bore. If you want a 505 Gibbs, there is no inexpensive route. But a well-made 505 Gibbs is a rifle is a genuine treasure.

Example loads:

Cartridge - Powder - Primer - Bullet - Velocity - Notes

505 Gibbs - 120.0 grains Reloader 15 - F215 - 600 grain FMJ - 2325 f.p.s. - 4 grains Dacron filler between bullet and powder

505 Gibbs - 136.0 grains Reloader 22 - F215 - 525 grain A-Square - 2328 f.p.s. - Use of a slower burning powder such as IMR7828 or RL22 permits fillers to be avoided.

(NE.com disclaimer - use of reloading data provided on NitroExpress.com or by the author is strictly at the user's own risk.)


Post Extras: Print Post   Remind Me!   Notify Moderator  
EzineAdministrator
.333 member


Reged: 25/12/02
Posts: 485
"Mini Compendium of Big Bore Cartridges" - .500 NE [Re: Ezine]
      #78062 - 06/05/07 03:43 AM

continued

Mini Compendium of Big Bore Cartridges

by Daniel McCarthy
© 2004


500 Nitro Express


The predecessor to the 500 Nitro Express was the 500 Black Powder Express, but the two cartridges have radical differences in power. While the 500 Black Powder Express fired a 440 grain lead bullet at 1500 feet per second, the 500 Nitro Express fires a 570 grain bullet at 2150 feet per second. Persons coming into possession of a 500 Black Powder Express should use care not to inadvertently shoot 500 Nitro Express ammunition in it or the rifle will be ruined. Further, the 500 Black Powder Express is a good rifle for pigs, black bear and plains game, but does not have a place hunting thick skinned dangerous game, although the 500 Nitro Express is a very potent dangerous game cartridge. To add further confusion to the mix, the 500 Nitro Express comes in 3 inch and 3 1/4 inch versions. The 3-inch version is more popular, and the ballistics of the two are identical.

At the present time, double rifles in 500 Nitro Express are currently made by Heym, Krieghoff, Merkel, Searcy, Westley Richards, Sig, Rigby, Holland & Holland and others. Bolt action rifles in 500 Nitro Express are made by Hambrusch Hunting Rifles. In years past, Heym also made bolt-action rifles in 500 Nitro Express.

In double rifles, the 500 Nitro Express offers the maximum power than can be found in a rifle of reasonable weight (10-11 pounds). The more powerful double rifle calibers require a significantly heavier rifle in order to keep recoil at a manageable level. The 500 Nitro Express is also known for being able to reach the lungs of a cape buffalo if he is shot up the tailpipe. The 577 and 600 Nitro Express cannot match this penetration. The reader should note that the 500 Nitro Express has the least impressive ballistics of any cartridge mentioned in this article, although the 500 Nitro Express is actually a larger and more powerful cartridge than most professional hunters use for backup when on safari. Hopefully that will help put the awesome power of some of these cartridges into perspective.

Example loads:

Cartridge - Powder - Primer - Bullet - Velocity - Notes

500 Nitro Express 3" - 96 grains Reloader 15 - F215 - 570 grain Barnes solid - 2150 f.p.s. - Filler may be desirable if Woodleigh bullets are used due to their shorter length.

500 Nitro Express 3" - 110.0 grains IMR4831 - F215 - 570 grain Barnes solid - 2150 f.p.s. - No filler.

500 Nitro Express 3" - 45.0 XMP5744 - F215 - 500 grain cast lead - 1500 f.p.s. - Low recoil practice load.

(NE.com disclaimer - use of reloading data provided on NitroExpress.com or by the author is strictly at the user's own risk.)

--------------------

Ezine.NitroExpress.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
EzineAdministrator
.333 member


Reged: 25/12/02
Posts: 485
"Mini Compendium of Big Bore Cartridges" - .500 Jeffrey [Re: Ezine]
      #78063 - 06/05/07 03:49 AM

continued

Mini Compendium of Big Bore Cartridges

by Daniel McCarthy
© 2004


500 Jeffery


The 500 Jeffery is misnamed as it was designed in Germany under the name "500 Schuler". Hostilities between England and Germany during the first world war resulted in British firms calling the cartridge the 500 Jeffery instead, although the two cartridges are one and the same. The European designation for the cartridge is 12.7 x 70 mm.



500 Jeffery rifle built by gunmaker Duane Wiebe. Mr. Weibe specializes in making 500 Jeffery rifles based on Mauser 98 actions that will feed from any angle, including upside down, at any speed. He also builds very fine takedown rifles in 500 Jeffery using a system so durable that it has not lost headspace after 30 years of hard use.


The 500 Jeffery is an excellent big bore stopping rifle pushing up to a 600 grain bullet at 2400 feet per second with proper reloads. Original ballistic were a 535 grain bullet at 2400 feet per second. Lengthwise penetration on buffalo using a 500 Jeffery is reported by Jaco Marais of South Africa. Similar performance can be obtained from the 505 Gibbs and 500 A-Square.

The 500 Jeffery has a cartridge overall length of 3.45" which permits it to be built on smaller actions such as standard Mauser 98. Before the reader becomes enthusiastic about rebarreling a surplus model 98 Mauser to 500 Jeffery, there are some difficult problems to consider. First, the 500 Jeffery has a rebated rim, which can lead to feeding problems if the rifle is not properly assembled. A few master rifle makers can get a 500 Jeffery to reliably feed from a staggered magazine. Others will prefer to use a single stack Schuler style magazine for its reliability. The original Schuler rifles used a single stack magazine. Another feeding trick is to use a U-shaped follower rather than a standard L-shaped follower in order for the cartridge to ride as high as possible to avoid the bolt overriding it and closing on an empty chamber. Second, the 500 Jeffery is a fat little cartridge that will require construction of a new magazine box and extensive work to the rails and ramp of the rifle. When these issues are considered, the 500 A-Square on a CZ550 action begins to look like a much more attractive option for the budget-minded. If the reader is seeking a high end rifle in 500 Jeffery, then a true specialist at getting such a rifle to feed should be employed by the project, such as Ryan Breeding or Duane Wiebe in California, Dennis Olson in Plains Montana, or Sterling Davenport in Arizona. B. Searcy & Co. (http://www.searcyent.com), Sigarms (http://www.sigarms.com), Heym, Reimer Johannsen, Karl-Heinz Ritterbusch (http://www.jagdgewehre.com/ger/gerframe.htm) and Gottfried Prechtl (http://www.golmatic.de/) offer very fine rifles in .500 Jeffery as well.



Another view of the 500 Jeffery rifle built by gunmaker Duane Wiebe in taken down form.


There has been some confusion about specification for the 500 Jeffery as well. It is essential to be certain that your rifle maker and your ammo maker are working from the same spec- ification. There are reports of Kynoch ammunition not properly fitting the chamber of Heym rifles in this caliber. For the reloader this is not a problem because he will simply obtain a sizing die built to his chamber's actual dimensions.

Example loads:

Cartridge - Powder - Primer - Bullet - Velocity - Notes

500 Jeffery - 101.0 gr. H4895 - F215 - 570 grain - 2303 f.p.s. - n/a

500 Jeffery - 105.0 gr. Reloader 15 - F215 - 570 grain - 2291 f.p.s. - n/a

(NE.com disclaimer - use of reloading data provided on NitroExpress.com or by the author is strictly at the user's own risk.)


Post Extras: Print Post   Remind Me!   Notify Moderator  
EzineAdministrator
.333 member


Reged: 25/12/02
Posts: 485
"Mini Compendium of Big Bore Cartridges" - .500 AHR [Re: Ezine]
      #78064 - 06/05/07 03:51 AM

continued

Mini Compendium of Big Bore Cartridges

by Daniel McCarthy
© 2004


500 AHR


The 500 AHR was designed by Ed Plummer of American Hunting Rifles (http://www.hunting-rifles.com) in Hamilton, Montana. It is intended to push 535 to 600 bullets at 2400 feet per second to duplicate the ballistics of the 500 Jeffery but without a rebated rim. AHR makes custom rifles in 500 AHR using the CZ550 action. The 500 AHR is what the 500 Jeffery should have been. An even more practical alternative is the 500 A-Square because the brass is more readily available.


--------------------

Ezine.NitroExpress.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
EzineAdministrator
.333 member


Reged: 25/12/02
Posts: 485
"Mini Compendium of Big Bore Cartridges" -500 A-Squ/500Wells [Re: Ezine]
      #78065 - 06/05/07 03:57 AM

continued

Mini Compendium of Big Bore Cartridges

by Daniel McCarthy
© 2004


500 A-Square/510 Wells


The 500 A-Square was designed by Art Alphin of the A-Square Company ( http://www.a-squarecompany.com ) for maximum penetration and shock power on dangerous game. Pushing a 600 grain bullet at 2400 f.p.s., the 500 A-Square is everything that a bolt gun afficianado could want. It uses a 460 Weatherby case necked up to .510" and slightly improved. The 510 Wells preceded the 500 A-Square by well over 20 years and was designed by Fred Wells of Phoenix, Arizona. Ballistics for the two cartridges are identical and selection of one over the other is merely a matter of personal preference. The 500 A-Square has a cartridge overall length of 3.75" and due to length will only fit into relatively large actions such as the CZ550. Some may be tempted to rebarrel a Weatherby Mark V or a Sako TRG to 500 A-Square thinking it a cheap and easy route to a big bore dangerous game rifle. Although the debate about controlled feed versus push feed actions is best left to another article, the author would not contemplate use of a Weatherby or Sako for this purpose. Factory rifles in 500 A-Square are available from the A-Square Company of Kentucky. B. Searcy & Co. offers bolt rifles in 510 Wells, as does Fred Wells ( http://www.cutrifle.com/gunsmithing.html ).

There are a couple of advantages that the 500 A-Square has over the 500 Jeffery, 505 Gibbs and 500 AHR. First, cheap, high quality brass in 460 Weatherby is available from Norma, and necking it up to .510" is a simple matter. In contrast, brass for the 505 Gibbs and 500 Jeffery can be very expensive and some of it can be of varying quality. Second, the 500 A-Square has a rim that fits easily onto a 0.700" bolt, making the use of expensive magnum mauser actions unnecessary. In fact, the 500 A-Square is one of the cheapest big bore rifles to build because a CZ550 in 416 Rigby can simply be rebarreled. Then the extractor needs to be tightened, and the rails opened very slightly. There are no simpler big bore conversions. Third, the 500 A-Square does not have a rebated rim, so there are no difficult feeding issues to contend with. Unless the reader insists on being a traditionalist, the 500 A-Square is probably the best choice in .50 caliber dangerous game calibers. Rifles for this cartridge should weigh at least 12 pounds.

A short version of the 500 A-Square called the .495 A-Square is available that is short enough to be build on Winchester model 70 and Mauser model 98 actions, with extensive reworking of the magazine box, rails and ramp.

Due to brass and bullet availability, the 500 A-Square is the most practical cartridge discussed in this article and should be seriously considered by anyone seeking a big bore on a budget. The disadvantage of the 500 A-Square is that it, like the 505 Gibbs, requires a very long action, making the rifle somewhat bulky.

Example loads:

Cartridge - Powder - Primer - Bullet - Velocity - Notes

500 A-Square - 118.0 grains Reloader 15 - F215 - 600 grain - 2450 f.p.s. - n/a

500 A-Square - 115.0 grains IMR 4350 - F215 - 750 grain Hornady bullet intended for the 50 BMG - 2150 f.p.s. - Requires chamber to be deep throated and for rounds to be single loaded.

500 A-Square - 122.0 grains H870 - F215 - 600 grain - 1800 f.p.s. - Reduced velocity practice load.

(NE.com disclaimer - use of reloading data provided on NitroExpress.com or by the author is strictly at the user's own risk.)

--------------------

Ezine.NitroExpress.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
EzineAdministrator
.333 member


Reged: 25/12/02
Posts: 485
"Mini Compendium of Big Bore Cartridges" - 550 Magnum [Re: Ezine]
      #78066 - 06/05/07 04:08 AM

continued

Mini Compendium of Big Bore Cartridges

by Daniel McCarthy
© 2004


550 Magnum


The 550 Magnum is a new cartridge designed by Neal Shirley of Yuma, Arizona that is generating a lot of excitement. It is based on the 460 Weatherby cartridge necked up to .550" bore diameter. The 550 Magnum will push a 700 grain bullet close to 2400 f.p.s. if the shooter can stand behind the rifle.



3 easy conversions: From left to right, 500 A-Square, 550 Express and 600 Overkill. The 500 A-Square and 550 Express are very easy and economical conversions to perform on a CZ550 in 416 Rigby. Little more than a new barrel and bedding are needed, with very minor rail and ramp adjustments. A CZ550 is also very easy to convert to 600 Overkill if it is sent to American Hunting Rifles where a single stack magazine box is installed that feeds fast and slick. For shooters looking for something big and easy, these 3 are the way to go.


By basing the 550 Magnum on 460 Weatherby basic brass, the historic problems related to rebated rims and/or brass of questionable quality in the 500 Jeffery, 505 Gibbs, 500 AHR and .585 Nyati are eliminated. The round will fit into a CZ550 action economically and with very little modification. The 550 Magnum pushes a 700 grain bullet at 2400 feet per second, creating a very deadly dangerous game round.

A short version of the 550 Magnum called the 550 Express will fit into Mauser 98 and Winchester model 70 actions. It has a 2.65 inch case and a 3.35 inch cartridge overall length so that it will fit into any action that accommodates a .338 Win. Mag. or .458 Win. Mag. It will be a true delight to be able to push 700 grain bullets at 2200 f.p.s. from surplus military Mauser 98 actions.

The 550 Magnum and 550 Express have a unique groove diameter of 0.550", shared only by a few obsolete cartridges. Consequently the bottleneck for 550 Magnum owners is a steady supply of top quality solids for dangerous game hunting. At the time of this writing, Mr. Shirley has gotten several premium bullet makers interesting in supplying this cartridge, Alaska Bullet Works, PA Bullets, http://www.CustomCastBullets.com , and Hawk bullets are already in production. Properly headstamped brass is available from Quality Cartridge, and Jamison International - Formerly BeLL Brass http://www.custombrassandbullets.com . Alternatively the reloader can just neck up and fireform 460 Weatherby brass, though it will be slightly too short, requiring the reloader to load to OAL rather than cannalure.

Barrels for the 550 Magnum are available from Dan Pederson of Cutrifle Barrels ( http://www.cutrifle.com ) in Prescott, Arizona, Bausksa Barrels, Pac-nor, and Badger barrels in the US.

For the reloader who wants a practical big bore bolt gun of maximum possible bullet diameter, the 550 Magnum is the natural choice. If you were thinking of a 500 A-Square, 505 Gibbs or 500 Jeffery but wanted a little more bullet, the 550 Magnum provides it. Even Mauser and Model 70 fans can have a low cost big bore by rebarreling to the 550 Express. Custom loaded ammo is available from Superior Ammo.

Example ballistics:

Cartridge - Bullet - Velocity - Notes

550 Magnum - 700 grain - 2400 f.p.s. - Long version for CZ550 and Ruger RSM actions. 26" barrel.

550 Magnum - 650 grain - 2400 f.p.s. - n/a

550 Magnum - 600 grain - 2500 f.p.s. - Low sectional density - not preferred.

550 Express - 600 grain - 2400 f.p.s. - Short version to fit in .458 Win. Mag. sized actions.

550 Express - 650 grain - 2250 f.p.s. - n/a

550 Express - 700 grain - 2200 f.p.s. - Maximum load 23" barrel.

(NE.com disclaimer - use of reloading data provided on NitroExpress.com or by the author is strictly at the user's own risk.)


Post Extras: Print Post   Remind Me!   Notify Moderator  
EzineAdministrator
.333 member


Reged: 25/12/02
Posts: 485
"Mini Compendium of Big Bore Cartridges" - 577 NE [Re: Ezine]
      #78068 - 06/05/07 04:14 AM

continued

Mini Compendium of Big Bore Cartridges

by Daniel McCarthy
© 2004


577 Nitro Express


The 577 Nitro Express chambered in modern rifles today is the 3 inch smokeless powder version that pushes a 750 grain bullet at 2050 feet per second. It is an extremely good killer while still offering adequate penetration. Rifle maker Butch Searcy reports excellent penetration and stopping power when using the .577 for elephant head shots and buffalo body shots. The cartridge has a few downsides, however. The first is that the recoil is rather fierce. The second is that rifles built for this caliber (other than unsuitable single shot conversions) are as expensive as a low-priced new car. The third is that 577 Nitro Express rifles typically weigh 13-16 pounds, and are quite difficult to carry day after day on safari. However, for the person who must have a stopper, this is definitely one of them.



577 Nitro Express double rifle by B. Searcy & Co. Searcy rifles combine traditional design, state of the art manufacturing technology, and attention to fine detail to provide the customer with excellent dangerous game rifles at reasonable prices.


There is also a 577 Nitro Express 2 ¾ inch version. It pushes a 650 grain bullet at 1850 feet per second. Coming up short in both sectional density and velocity, penetration with this caliber will not be satisfactory on the more difficult head shots on elephant or quartering away shots on buffalo. There was also a 577 Black Powder Express which pushed a 520 grain lead bullet at 1700 feet per second. Those rifles, while fun novelties and great for pigs and cats, should not be considered an appropriate choice for thick skinned dangerous game.

Various double makers, including Searcy, Westley Richards, Holland & Holland and Heym make double barreled rifles in 577 Nitro Express. In addition, Hamrusch ( http://www.ferlachguns.com ) and Heym make bolt action rifles in this caliber.

Sample load data for the 577 Nitro Express 3 inch is as follows:

Cartridge - Powder - Primer - Bullet - Velocity - Notes

577 Nitro Express 3" - 145.0 grains IMR4831 - F215 - 750 Woodleigh - 2050 f.p.s. - n/a

577 Nitro Express 3" - 135.0 grains Reloader 15 - F215 - 750 Woodleigh - 2050 f.p.s. - Filler may be needed to avoid hangfires.

(NE.com disclaimer - use of reloading data provided on NitroExpress.com or by the author is strictly at the user's own risk.)


Post Extras: Print Post   Remind Me!   Notify Moderator  
EzineAdministrator
.333 member


Reged: 25/12/02
Posts: 485
"Mini Compendium of Big Bore Cartridges" - 585 Nyati [Re: Ezine]
      #78069 - 06/05/07 04:19 AM

continued

Mini Compendium of Big Bore Cartridges

by Daniel McCarthy
© 2004


585 Nyati


The .585 Nyati was designed by writer and professional hunter Ross Seyfried in order to offer the power of the .577 Nitro Express cartridge in an affordable bolt action rifle. At the time when Mr. Seyfried designed the cartridge, double rifles were out of the financial reach of most professional hunters and client hunters alike, so the concept of bringing the tremendous stopping power of the 577 Nitro Express to a bolt action rifle had great allure. Today one of the most affordable double rifle makers is B. Searcy & Co.of Boron, California, but even there a 577 Nitro Express double will cost US$15,000 at the time of this writing. In contrast, a well-planned low grade .585 Nyati bolt gun can be put together for only US$3000. The author had such a rifle constructed on a Winchester model 70 action built by gunsmith Franz Bryner of Ogden, Utah.



585 Van Horn built on a Granite Mountain Arms action by Ryan Breeding.



The disadvantage of the .585 Nyati is its use of a rebated rim so that rifles with a 0.700" bolt body diameter can be fitted for the cartridge. It can be difficult to get a rifle using a cartridge with a rebated rim to feed reliably (see discussion of 500 Jeffery above), so a project for this cartridge should only be undertaken by a master big bore specialist, or by someone who is willing to experiment and throw away the action if unsuccessful.

The standard .585 Nyati uses a 0.640" rim and has a case length of 2.800". Another variation uses the same rim but a 3.00 inch length case. With its greater powder capacity, the 3 inch version can push a 750 grain bullet even faster than the 2500 feet per second achievable by the 2.8 inch version, but to what useful end the author cannot imagine. A third variation uses a 0.590" rim (same as the 416 Rigby) to avoid the use of an expensive action with a bolt body diameter of greater than 0.700" which would be desirable on the 0.640" rim version. However, with the severely rebated 0.590" rim, reliable feeding is an almost unobtainable goal so the reader is encouraged to avoid this variation. A ballistically identical cartridge called the .585 African Express (Ralston) has been designed by Brad Ralston of South Africa. It uses a full sized rim instead of a rebated rim for use in the Granite Mountain Arms magnum mauser action. The .585 Van Horn also offers similar ballistics with some variations in case dimensions.

Another issue with the .585 Nyati is that many barrels are being produced with excessively tight chamber necks. The author believes this may be due to an error in original drawings for the cartridge. If your barrel maker sends you a barrel with a tight neck, just ream it out to 0.614" with a neck reamer and tight necks (and dangerous pressures) will not be a problem. Rifles for the .585 Nyati cartridge should weigh a minimum of 11 pounds and preferably 13 pounds in order to make them controllable. For hunting purposes, the owner of a .585 Nyati should consider keeping his velocities below 2300 feet per second or follow up shots will be slow.

The author has used the .585 Nyati on elephant and buffalo with satisfactory results. Both were heart/lung shots at under 25 yards, and in each case the game traveled less than 20 yards before collapsing. The buffalo was spooked before being shot, but his adrenaline was no match for a 750 grain solid moving at 2250 feet per second. The recoil is violent and always surprising. I can shoot 10-14 shots of .585 Nyati in a day, but only if I take Tylenol before going to the shooting range.

At present I know of no factory rifles in .585 Nyati nor are there likely to ever be any. Rifles in this cartridge are strictly a custom affair, and ammunition should only be loaded by the advanced reloader. Although the .585 Nyati is a very effective and fun cartridge, it is not very practical. Brass can be of inconsistent quality and/or in short supply. Only big bore experts are likely to get a rifle in this cartridge to feed properly, and the labor cost of doing so will be significant.

Example loads:

Cartridge - Powder - Primer - Bullet - Velocity - Notes

585 Nyati 2.8" - 130.0 grains Reloader 15 - F215 - 750 grain TCCI solid - 2250 f.p.s. - This is the author's recoil limit.

585 Nyati 2.8" - 120.0 grains IMR4350 - F215 - 750 Woodleigh - 2050 f.p.s. - Approximates 577 Nitro Express factory load.

585 Nyati 2.8" - 90.0 grains H4831 - F215 - 1200 grain cast - 1300 f.p.s. - Low recoil practice load.

(NE.com disclaimer - use of reloading data provided on NitroExpress.com or by the author is strictly at the user's own risk.)


Post Extras: Print Post   Remind Me!   Notify Moderator  
EzineAdministrator
.333 member


Reged: 25/12/02
Posts: 485
"Mini Compendium of Big Bore Cartridges" - 577 Tyrannosaur [Re: Ezine]
      #78070 - 06/05/07 04:21 AM

continued

Mini Compendium of Big Bore Cartridges

by Daniel McCarthy
© 2004


577 Tyrannosaur


In the days that the British ruled most of huntable Africa, the magic velocity for dangerous game hunting was considered to be 2150 feet per second. During the past 30 years the game has changed, however, and sportsmen demand ever more from their rifles. Now in order to assure adequate penetration from every angle, the conventional wisdom is that a cartridge should generate 2400 feet per second.

The 577 Tyrannosaur is a modern day attempt to blend the giant .585 diameter 750 grain bullets of the 577 Nitro Express with the magic velocity of 2400 feet per second. The result is a brutish rifle that is nearly uncontrollable. Another consideration is that monolithic solids should be used in this cartridge because bullets of a convention design meant for 577 Nitro Express velocities will likely rivet or break apart at 577 Tyrannosaur velocities. One Norwegian hunter shot an elephant in the spine using a .577 Tyrannosaur loaded with Woodleigh 750 grain solids. The Woodleigh riveted and fishtailed, as it had been pushed beyond its design criteria.

For the sportsman interested in building a custom rifle for the 577 Tyrannosaur, only a magnum length (3.800") magazine box will suffice, thus ruling out model 70's and Mauser 98's. Further, the enormous diameter of the case rim (0.688") requires either a P14 Enfield bolt, or at least a 0.750" bolt body diameter. Magazine box and follower construction as well as rail and ramp modifications to the action will all be completely custom and should only be attempted by the most skilled big bore specialist. Brass and ammo for the 577 Tyrannosaur are even more expensive and harder to find than for the 577 Nitro Express. Although the 577 Tyrannosaur can be loaded down to reduce its horrendous and almost uncontrollable recoil, the .585 Nyati would be a better choice for lower velocity loads since it burns less powder and therefore will produce less recoil. Factory rifles in .577 Tyrannosaur are available from the A-Square Company of Kentucky. Custom gunsmith Joe Smithson of Provo, Utah offers fine custom rifles in .577 Tyrannosaur based on the Granite Mountain action.

Example loads:

Cartridge - Powder - Primer - Bullet - Velocity - Notes

577 Tyrannosaur - 170.0 grains IMR4350 - F215 - 750 solid - 2480 f.p.s.

(NE.com disclaimer - use of reloading data provided on NitroExpress.com or by the author is strictly at the user's own risk.)

--------------------

Ezine.NitroExpress.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
EzineAdministrator
.333 member


Reged: 25/12/02
Posts: 485
"Mini Compendium of Big Bore Cartridges" - 600 NE [Re: Ezine]
      #78071 - 06/05/07 04:26 AM

continued

Mini Compendium of Big Bore Cartridges

by Daniel McCarthy
© 2004


600 Nitro Express


The .600 Nitro Express was designed by Jeffery in 1903. There was no black powder predecessor to it. It fires a 900 grain bullet at 1950 feet per second, although in Jeffery double rifles it was regulated for 1850 f.p.s. At these somewhat anemic velocities, the cartridge never developed a reputation for being a deep penetrator. Further, there were some reports of bullet failure with the old Kynoch bullets which had a thin copper jacket and were subject to riveting. Modern solid bullets from Woodleigh include a steel liner inside their jacket that enhances their durability, and Barnes offers a monolithic brass solid in this caliber. The Woodleigh solids have a very blunt shape intended to impart the greatest possible shock to an elephant's head.



Heym Express Rifle in 600 nitro express. These rifles are very well made and attractive, balance well and are very accurate.


The idea behind the .600 Nitro Express was to provide a cartridge that will deliver a tremendous shock to a wounded elephant so that if the hunter missed the brain, the shock from the bullet would still knock the animal down. John Pondoro Taylor reported elephants head shot with the .600 Nitro Express when the bullet missed the brain remaining unconscious for up to 30 minutes. While I doubt the sanity of a man who would measure the time it takes an unconscious elephant to awaken and resume his charge, the recoil of the .600 Nitro Express is convincing enough to the shooter.

Rifles in .600 Nitro Express are typically doubles, making them rather expensive. Searcy Enterprises offers a .600 Nitro Express boxlock double for US$25,000 as of this writing, and Heym offers one for US$38,000. Other makers are in the game too, but from there the prices go up. Bolt-action 600 Nitro Express rifles are available from Heym Waffenfabrik in Gleichamberg, Germany for only US$13,000. Bolt action rifles in .600 Nitro Express are also available from Hambursch Hunting Guns in Ferlach, Austria.

The author owned a Heym Express Rifle in 600 Nitro Express and found it extremely well made and well balanced, and capable of putting 3 shots into 3 inches at 50 yards from an offhand position. However, the recoil was so great that the rifle was pointing upwards at a 70 degree angle after each shot, and the author needed to rest 10 minutes between shots to get over that 'car accident feeling'. Other than that minor inconvenience and the great weight of the rifle, my 600 Nitro Express was a delight. I wish I had owned the same rifle in a .50 caliber cartridge. In the end, however, I had to decide whether to leave a large block of cash tied up in the Heym or go elephant hunting. Elephant hunting won, and the Heym found a new residence.



Heym Express Rifle in 600 nitro express.

In reality the .600 Nitro Express is not a practical choice due to its weight, cost, recoil, and somewhat shallow penetration. The reader would be better off to consider a .550 Magnum or 500 A-Square instead. In a double rifle, a 500 Nitro Express is more practical.

Example loads:

Cartridge - Powder - Primer - Bullet - Velocity - Notes

600 nitro express - 159.0 grains Reloader 22 - F215 - 900 grain Woodleigh FMJ - 1950 f.p.s. - No filler. Fierce recoil.

600 nitro express - 145.0 IMR7828 - F215 - 900 grain Woodleigh FMJ - 1950 f.p.s. - n/a

(NE.com disclaimer - use of reloading data provided on NitroExpress.com or by the author is strictly at the user's own risk.)


Post Extras: Print Post   Remind Me!   Notify Moderator  
EzineAdministrator
.333 member


Reged: 25/12/02
Posts: 485
"Mini Compendium of Big Bore Cartridges" - 600 Overkill [Re: Ezine]
      #78072 - 06/05/07 04:32 AM

continued

Mini Compendium of Big Bore Cartridges

by Daniel McCarthy
© 2004


600 Overkill


The 600 Overkill was designed by scientist Robert Garnick of Las Vegas, Nevada. It was intended to take full advantage of the dimensions of the CZ550 action in order to fit into that action the largest cartridge that could be accommodated. With moderate alterations, a CZ550 can be made to accommodate 2 cartridges of 600 Overkill in the magazine plus one in the chamber. Using brass solids bullets, the 600 Overkill will penetrate 6 feet into an oak log. Even elephant skulls are not as dense as oak, assuring that the 600 Overkill pushing 900 grain solid bullets at 2400 f.p.s. will offer excellent penetration on any game.



600 Overkill rifle built on CZ550 action by American Hunting Rifles. Note the large but manageable proportions of the rifle. A single stack magazine box assures excellent feeding.


The 600 Overkill case originated from the 600 Nitro Express. The rim was removed from the 600 Nitro Express and a belt was added for headspacing purposes. A 0.640" rebated rim was cut on the case - the same size used by the .505 Gibbs. The case walls were left straight for a 3.0 inch case and a 3.75 inch cartridge overall length. Custom 3 groove barrels with 1:16 twist are made by Pac-Nor Barrels of Brookings, Oregon. A 3 groove barrel with a 1:16" twist was chosen to keep pressures low and permit the cartridge to achieve higher velocities than would be otherwise possible. This scheme seems to have worked because with the same powder charge and bullet, the 600 Overkill achieves about 75 f.p.s. more velocity than the 600 Nitro Express.



600 Overkill rifle by Robert Garnick using Granite Mountain Arms action. The Granite Mountain Arms action is an excellent starting point for a big bore project.


The 600 Overkill has the ability to push a 900 grain bullet at more than 2400 f.p.s. if the shooter can withstand the recoil and maintain his grip on the gun. At that level of power, as the bullet spins down the barrel, the rifle is torqued in the opposite direction, tending to twist the forearm of the rifle out of the shooter's hand. Brass for the 600 Overkill is available on a special order basis from Dieter Horneber ( http://www.huelsen-horneber.com ) of Germany. Rifles may be ordered from American Hunting Rifles for not much more than US$3000. For the big bore fan who needs the biggest affordable big bore, the 600 Overkill based on a CZ550 action is for him.

Example loads:

Cartridge - Powder - Primer - Bullet - Velocity - Notes

600 Overkill - 158.0 grain IMR7828 - F215 - 900 grain Woodleigh FMJ - 2150 f.p.s. - Controllable recoil when fired in a 14 pound rifle with 3 mercury recoil reducers and a muzzle brake.

600 Overkill - 175 grain H414 - F215 - 900 grain Woodleigh FMJ - 2400 f.p.s. - The forearm is difficult to hold onto at this velocity due to torque created by the bullet spinning down the bore.

(NE.com disclaimer - use of reloading data provided on NitroExpress.com or by the author is strictly at the user's own risk.)


Post Extras: Print Post   Remind Me!   Notify Moderator  
EzineAdministrator
.333 member


Reged: 25/12/02
Posts: 485
"Mini Compendium of Big Bore Cartridges" - 700 NE [Re: Ezine]
      #78073 - 06/05/07 04:37 AM

continued

Mini Compendium of Big Bore Cartridges

by Daniel McCarthy
© 2004


700 Nitro Express


The 700 Nitro Express came about when a customer of Holland & Holland wanted to purchase a 600 Nitro Express double rifle, but H&H had sold the "last one". Undaunted, the customer pushed the project ahead and H&H built a 700 N.E. double rifle for him. Currently H&H, Watson Bros. and Searcy Enterprises offer double rifles in 700 N.E. Hambrusch Hunting Weapons of Ferlach, Austria offers a bolt-action repeater in 700 N.E. as well. Standard ballistics indicate a 1000 bullet at 2000 f.p.s. However, there has been some discussion of penetration problems with the cartridge and talk of increasing the bullet weight to 1200 grains while keeping velocity at 2000 f.p.s. to improve penetration. Rifles for this caliber weigh in the 16-20 pound range and only the fittest of men can carry such a burden for 20 miles on an elephant track in the hot African sun.



700 Nitro Express bolt action rifle by Hambrusch Jagdwaffen. The monster rifle is relatively easy to shoot offhand.


A 700 Nitro Express was taken on a recent elephant hunt in Botswana with Safaris Botswana Bound ( saf.bots@info.bw ), and the following report was provided by Graeme Pollock.

Quote:

"The gun was too heavy for the hunter to walk the long distances sometimes required in Elephant hunting…. The first shot on the Elephant was a frontal shot which did not hit the brain and did not knock the Elephant down. The shot was apparently high due to a hang fire. The second shot was lung heart and the elephant again did not go straight down but it did not move much either before going down. The 1000g bullet seems to have not much more noticeable knockdown power than the 500 or 470 NE 500g round."






Information on the the 700 Nitro Express Big Bore Rifle.



Similarly, professional hunter Mark Sullivan who has hunted with a 16 pound Watson Brother's 700 Nitro Express, finds it a bit too heavy to get onto charging buffalo as quickly as he would like. When considering the cost of a rifle in 700 Nitro Express, the weight and difficulty of carrying one, and the savage recoil, the performance on game is rather disappointing.

Example load:

Cartridge - Powder - Primer - Bullet - Velocity - Notes

700 Nitro Express - 160.0 gr. Reloader 15 - F215 - 1000 grain Woodleigh solid - 2000 f.p.s. - Use 1 1/8" hard foam wad between powder and bullet to avoid misfires and hangfires.

(NE.com disclaimer - use of reloading data provided on NitroExpress.com or by the author is strictly at the user's own risk.)


Post Extras: Print Post   Remind Me!   Notify Moderator  
EzineAdministrator
.333 member


Reged: 25/12/02
Posts: 485
"Mini Compendium of Big Bore Cartridges" - Summary [Re: Ezine]
      #78074 - 06/05/07 04:40 AM


continued

Mini Compendium of Big Bore Cartridges

by Daniel McCarthy
© 2004


Summary of Big Bore Cartridges


A table for use in comparing the various big bore cartridges discussed in this article is shown below. The velocities listed are generally the upper limit of what a normal human would want to fire from these rounds, although most of the cartridges will permit even more velocity without excessive pressure, but there are few humans who would want to endure the rather punishing recoil that results.

Cartridge - Bullet Diameter (inches) - Bullet Weight - Velocity (f.p.s.) - Typical Weight of Rifle - Recoil Energy (ft. lbs.) - Recoil Velocity (f.p.s.)

505 Gibbs - .505 - 525 - 2350 - 12 pounds - 84 - 21
505 Gibbs - .505 - 600 - 2400 (with reloads) - 12 pounds - 106 - 23
500 Nitro Express - .510 - 570 - 2150 - 11 pounds - 77 - 21
500 Jeffery - .510 - 535 - 2400 - 10.5 pounds - 92 - 23
500 Jeffery - .510 - 570 - 2400 (with reloads) - 10.5 pounds - 103 - 25
500 A-Square - .510 - 600 - 2400 - 11 pounds - 107 - 25
550 Express - .550 - 600 - 2400 - 11 pounds - 107 - 25
550 Express - .550 - 650 - 2200 - 11 pounds - 98 - 24
550 Express - .550 - 700 - 2100 - 11 pounds - 101 - 24
550 Magnum - .550 - 600 - 2500 - 12 pounds - 113 - 24
550 Magnum - .550 - 650 - 2400 - 12 pounds - 112 - 24
550 Magnum - .550 - 700 - 2300 - 12 pounds - 113 - 24
577 Nitro Express - .585 - 750 - 2050 - 14 pounds - 95 - 20
585 Nyati - .585 - 750 - 2300 - 13 pounds - 129 - 25
577 Tyrannosaur - .585 - 750 - 2500 - 13 pounds - 172 - 29
600 Nitro Express - .620 - 900 - 1950 - 16 pounds - 104 - 20
600 Overkill - .620 - 900 - 2400 - 14 pounds - 189 - 29
700 Nitro Express - .700 - 1000 - 2000 - 18 pounds - 115 - 20

From this table it is easy to see that increasing the velocity of a heavy bullet increase recoil very substantially. Personally I find anything with recoil energy above 100 pounds difficult to shoot. And when recoil velocity exceeds 25 f.p.s., the recoil has a very sharp jab to it. But with the appropriate stock design and some mercury tubes in the stock, the edge can be taken off the recoil so that pulling the trigger does not cause quite as much physical trauma as having an auto accident.

--------------------

Ezine.NitroExpress.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
EzineAdministrator
.333 member


Reged: 25/12/02
Posts: 485
"Mini Compendium of Big Bore Cartridges" - Actions etc [Re: Ezine]
      #78075 - 06/05/07 04:43 AM

continued

Mini Compendium of Big Bore Cartridges

by Daniel McCarthy
© 2004


Actions, etc.


The most difficult portion of a big bore custom rifle project is selecting and paying for the appropriate action. Some cartridges, such as the .585 Nyati and .505 Gibbs, and 600 Overkill are best built on a magnum mauser action which can cost from $2800 on up for the action alone. Actions suitable for at least some of the cartridges listed above are available from Granite Mountain Arms of Prescott, Arizona, David Gentry ( http://www.gentrycustom.com ) of Belgrade, Montana, Hartman & Weiss of Hamburg, Germany, Karl-Heinz Ritterbusch of Germany, Reimer Johannsen of Germany, Gottfried Prechtl of Germany, Vektor Arms of South Africa, Waffenfabrik Hein ( http://www.rifleactions.com ), the CZ550 action from Brownell's catalog, and the P14 Enfield action. Some of the cartridges, such as the 500 Jeffery, 495 A-Square and 550 Express will fit on a standard sized action such as a Winchester model 70 or Mauser 98 after extensive remodeling.

Barrels and reamers for these cartridges are available on a custom order basis from many of the usual sources. Dies for most calibers are available from CH4D ( http://www.ch4d.com ) in Ohio, RCBS in Califonia (through http://www.huntings.com ), or Redding ( http://www.reddingreloading.com ) in New York. Bullets may be obtained from Woodleigh (distributed by Huntingtons and Midway in the USA), Barnes, Hawk, and others.

By its nature, any encycolopedic writing such as this is abridged and therefore incomplete. To the extent that I have failed to mention any relevant manufacturers, products or gunsmiths, I offer my apologies, because anyone who provides a product or service to the big bore market is advancing our sport.

--------------------

Ezine.NitroExpress.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
EzineAdministrator
.333 member


Reged: 25/12/02
Posts: 485
"Mini Compendium of Big Bore Cartridges" - Recoil & Other [Re: Ezine]
      #78076 - 06/05/07 04:47 AM

continued

Mini Compendium of Big Bore Cartridges

by Daniel McCarthy
© 2004


Recoil Control and Other Concepts


Big bore rifles have gotten a reputation for delivering punishing recoil at levels that will cause concussions and break collarbones. While a lightweight big bore rifle with a poorly designed stock will be painful to shoot, some relatively simple measures can be taken to significantly tame the recoil of big bore rifles and bring their recoil levels within the reach of ordinary shooters. These are discussed below. There are also passages below covering miscellaneous topics related to big bore cartridges.

Muzzle Brakes
A well-designed muzzle brake assists in dissipating expanding gases produced when gunpowder is burned. Ordinarily expanding gases will travel out of a barrel directly away from the shooter, propelling the rifle rearward into the shooter's shoulder. A muzzle brake can be used to redirect a portion of those gases laterally so that there is not quite so much gas pushing the rifle rearward into the shooter. A muzzle brake can also be designed with an internal chamber so that gas, which exits the muzzle of the barrel and hits the front of the muzzle brake chamber, tends to push the rifle away from the shooter, thereby reducing recoil. Finally, muzzle brakes can reduce muzzle rise during recoil, making the rifle more comfortable to shoot.

Mercury Recoil Reducers
Mercury recoil reducers are metal tubes partially filled with mercury. They add weight to a rifle, and adding weight always reduces recoil. But more importantly, when a rifle with a mercury recoil reducer begins to travel rearward under recoil, the mercury will tend to remain stationary in its tube due to inertia. But after the rifle has moved some small distance, the mercury tube, which is moving with the rifle stock, hits the stationary mercury. The stationary mercury absorbs some of the energy of the rifle's recoil, and also slows down the velocity of the recoil. The net result for the shooter is that the recoil feels less swift and sharp as the mercury reduces the bite of the recoil.

Recoil Pads
There is no question that not all recoil pads are created equal. Some look good but feel as hard as steel when the trigger is pulled, while some absorb recoil quite nicely. For heavy recoiling big bore cartridges, reliance on traditional recoil pads will only make the shooter uncomfortable. Some better performing recoil pads include the Pachmyr F990 and the Answer System recoil pad. Personally I think that the Pachmyr Old English recoil pad is inadequate for anything above .458 caliber.

Second Recoil Lug
Generally cartridges above .458 Winchester Magnum require a second recoil lug on the barrel in order to spread out the transfer of force from the barreled action to the stock and reduce the chance of splitting the stock. Adding a second recoil lug to a barrel is not expensive and should not be skipped in any big bore project.

Cross Bolts
As a rifle moves rearward during recoil, the recoil lug exerts a force longitudinally on the rifle stock. That force tends to push the wood of the stock outward laterally much the way an axe splits a piece of firewood. Cross bolts in the stock tend to keep the grain of the wood compressed and reduce the ability of the wood to move, also reducing the chance that the wood will split.

Primers
Field experience by many shooters has shown that Federal 215 and Federal 215 Match primers give the best ignition for the heavy powder charges of big bore cartridges. Federal makes a hotter primer called the F216 for its 470 Nitro Express factory loads, but will not sell the F216 to the public.

--------------------

Ezine.NitroExpress.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
EzineAdministrator
.333 member


Reged: 25/12/02
Posts: 485
"Mini Compendium of Big Bore Cartridges" - Conclusion [Re: Ezine]
      #78077 - 06/05/07 04:48 AM

continued

Mini Compendium of Big Bore Cartridges

by Daniel McCarthy
© 2004


Conclusion


For the person wanting the biggest bolt action dangerous game rifle that there is, the Hambrusch .700 NE has no competition. A more affordable alternative with nearly as large a bore diameter is found in the 600 Overkill, which can be constructed for a little more than US$3000 using a CZ550 action. Most rifles fall between these two extremes and at this time an excellent big bore bolt action rifle suitable for use on dangerous game can be built for between US$10,000 and US$20,000.

Some of the more practical alternatives for the reloader seeking maximum power are found in the .550 Magnum, .550 Express, 500 A-Square and 495 A-Square which are all based on .460 Weatherby brass which is plentiful and relatively inexpensive. For the traditionalist, a 505 Gibbs is an option and it is certainly attractive in some of the fine rifles that are available. A .500 Jeffery, when assembled by a expert big bore riflemaker, is also a sound choice. The other cartridges each have their place, depending on the shooter's preferences. No matter which of these the reader may choose, I can assure you that the .375 H&H will have absolutely no felt recoil after a range session with your new big bore.

--------------------

Ezine.NitroExpress.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39066
Loc: Barossa Valley, South Australi...
Re: "Mini Compendium of Big Bore Cartridges" - Conclusion [Re: Ezine]
      #78104 - 06/05/07 04:19 PM

Dan,

Wow.

Great work!

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
hoppdoc
.400 member


Reged: 02/03/06
Posts: 1791
Loc: Southeastern USA
Re: "Mini Compendium of Big Bore Cartridges" - Conclusion [Re: NitroX]
      #78110 - 06/05/07 08:50 PM

Great work!!

Great and practical Big Bore summary!!

Question--

What is the best Bolt Rifle Killing Caliber for Elephant in the BIG BORES?
The 500 cals, the 577's, the 600's, etc?





Edited by hoppdoc (07/05/07 09:00 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
dnovo
.333 member


Reged: 21/02/05
Posts: 490
Loc: Chicago & SE Wisconsin
Re: "Mini Compendium of Big Bore Cartridges" - Conclusion [Re: hoppdoc]
      #78112 - 06/05/07 09:13 PM

My congrats as well. Incredible job, and written with style and panache. BTW, my personal vote for best 'bang for the buck' is the CZ Safari Classic in 505 Gibbs. Nicely done with jeweled bolt, dual cross bolt, recoil reducer and muzzle brake options, just a tad over $2,000 'street price' with very nice wood and fit for the price as well. I 'just had' to get one and shooting it is fun. As with any cartridge in this range, one wants to shoot standing up rather than from a rest, and keep a firm grip (but not a death grip) on the stock, and roll with the push. Far more 'nitro like' (a push, not a Weatherby Wack) than many of the other higher pressure loads described above and not at all the shoulder breaker as feared by some. Plus, loading those big rounds into the magazine is just plain fun. Dave

--------------------
Time Wounds All Heels


Post Extras: Print Post   Remind Me!   Notify Moderator  
hoppdoc
.400 member


Reged: 02/03/06
Posts: 1791
Loc: Southeastern USA
Re: "Mini Compendium of Big Bore Cartridges" - Conclusion [Re: dnovo]
      #78164 - 07/05/07 07:23 PM

A 505 Gibbs available om Gunbroker.com-

http://www.gunbroker.com/Auction/ViewItem.asp?Item=71214087

Don't know about their OOB reliabity but I am sure with everything sorted out it would be a superb DG bolt.

Another option previously discussed in other threads would be to get a CZ 416 Rigby and rebarrel to 500 A Square/500 Wells(460 Wby case with .510 bullets). Brass availability wouldn't be a problem, the cartridge would be somewhat smaller and could be downloaded to 600gr @ 2250 from 2400fps and still be a great DG bolt.

Either gun would be portable at around 10.5 pounds and a great DG bolt.

Edited by hoppdoc (07/05/07 07:35 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
dnovo
.333 member


Reged: 21/02/05
Posts: 490
Loc: Chicago & SE Wisconsin
Re: "Mini Compendium of Big Bore Cartridges" - Conclusion [Re: hoppdoc]
      #78174 - 08/05/07 02:51 AM

The "OOB" reliability on my 505 has been excellent. Dave

--------------------
Time Wounds All Heels


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26414
Loc: Beautiful British Columbia, Ca...
Re: "Mini Compendium of Big Bore Cartridges" - Conclusion [Re: dnovo]
      #78185 - 08/05/07 04:36 AM

I once shot a .505 Barnes Supreme-like wildcat back in the early 70's, built on a ZKK BRNO action, light custom stock. It uses necked and blown .460 WTBY brass. The owner said the load was 124gr. IMR 3031, with 600gr. Barnes at something like 2,800fps. Total weight of the rifle was a scant 9 pounds with 4X scope. It spun me around like a weathercock. Guess I should have held it harder, not like my pet offhand match rifle. I put that one above my recoil limit. 1 shot was enough. His velocity quote seems to be about 100fps high of maximum.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
hoppdoc
.400 member


Reged: 02/03/06
Posts: 1791
Loc: Southeastern USA
Re: "Mini Compendium of Big Bore Cartridges" - Conclusion [Re: DarylS]
      #78195 - 08/05/07 09:20 AM

That calculates out to 184 ft-pnds energy at 36 ft/sec.

I agree, that would be outa my league as well.

I am not into that kind of pain.

--------------------
An armed man is a citizen of his country, an unarmed man just a subject.


Post Extras: Print Post   Remind Me!   Notify Moderator  
mikeh416Rigby
.450 member


Reged: 24/02/03
Posts: 6051
Loc: The beautiful Oley Valley, PA....
Re: "Mini Compendium of Big Bore Cartridges" by Dan McCarthy [Re: Ezine]
      #96709 - 14/02/08 09:15 AM

This is a very nice piece of work. Thanks for sharing it with the members here.

Post Extras: Print Post   Remind Me!   Notify Moderator  
bigdog
.375 member


Reged: 05/02/06
Posts: 559
Loc: Southern Illinois
Re: "Mini Compendium of Big Bore Cartridges" by Dan McCarthy [Re: mikeh416Rigby]
      #96716 - 14/02/08 10:31 AM

AHR now makes a 700 bolt action rifle that will easily get 2100 ft/sec with a 1000 grain bullet. It will be tested, but will probably get 2300 or 2400 ft/sec. These rifles cost in the 11,000 to 13,000 dollar range. While not cheap, the sure beat the price tag of the Peter Hambraush 700 bolt rifle. Wayne has completed 2 and is working on 2 more right now.

--------------------
Kyle, I love you buddy, Dad


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1 | 2 | >> (show all)



Extra information
0 registered and 93 anonymous users are browsing this forum.

Moderator:   

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 30379

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved