Home | Ezine | Forums | Links | Contact
NitroExpress.com: 500, a square, 577 t rex

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
msorenso
.224 member


Reged: 02/02/05
Posts: 24
Loc: SOUTH DAKOTA, USA
500, a square, 577 t rex
      #64932 - 31/10/06 02:29 AM

I want to build a rifle in both of these calibers. Any suggestions on which rifle to start with??

--------------------
LIVE FREE OR DIE

Post Extras: Print Post   Remind Me!   Notify Moderator  
500grains
.416 member


Reged: 16/02/04
Posts: 4732
Loc: Salt Lake City, Utah USA
Re: 500, a square, 577 t rex [Re: msorenso]
      #64943 - 31/10/06 04:38 AM

1. 500 A2. If you start with a CZ550 in 416 Rigby, it is quite easy for a good gunsmith to get it to feed .500 A2 with a very little rail and ramp work. Also, he will have to tighten the extractor for you and install a recoil lug on the underside of the barrel. the CZ550 also needs a new safety (model 70 style) or else the safety can inavertently be pushed to the ON position while working the bolt. And frankly, it could use a more attractive bolt handle and some new sights too.

2. 577 TRex. This has a gigantic rim (0.580"?? from memory) and therefore needs either at least a 0.750" bolt body diameter, or a P14 bolt which has an extended left lug to hold the rim. You could use an Enfield P14 action as A-Square does, but the gunsmithing is so expensive that it is not worth it. Or you could use a Granite Mountain Arms magnum Mauser action, which will work. The cheapest route would be to buy an A-Square rifle for about $3500, install a new stock, new sights, model 70 safety. As a prior .585 owner, I recommend that you go with the 500A2 project at is is more affordable, brass is readily available and good quality, the gun goes not need to be as heavy, and the recoil will not be too overwhelming to hunt with. But if you really want the biggest and baddest, get a .600 Overkill.

3. .600 Overkill. This round pushes a 900 grain 0.620" bullet at 2400 fps and is based on a CZ550 action. You can get one from www.hunting-rifles.com for only $3500 which is a genuine bargain. But, beware of the recoil.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Mike_McGuire
.333 member


Reged: 11/06/05
Posts: 348
Loc: Sydney Australia
Re: 500, a square, 577 t rex [Re: msorenso]
      #64963 - 31/10/06 10:34 AM

577 T Rex = As what 500 grains said

500 A2 = Buy a used 460 Wby Mark V and with luck it will come with dies and cases. A simple rebarrel and recoil lug installed on the new barrel. The Mark V 460 stock is more than big enough in the forend for a 50 calibre barrel.

But shoot the 460 first with the muzzle brake removed and then see if you really want more

Mike

Post Extras: Print Post   Remind Me!   Notify Moderator  
bigdog
.375 member


Reged: 05/02/06
Posts: 559
Loc: Southern Illinois
Re: 500, a square, 577 t rex [Re: msorenso]
      #64974 - 31/10/06 01:58 PM

The 600 OK by AHR is going to run closer to the $4,000 to $4,500 range for a basic model.

--------------------
Kyle, I love you buddy, Dad

Post Extras: Print Post   Remind Me!   Notify Moderator  
msorenso
.224 member


Reged: 02/02/05
Posts: 24
Loc: SOUTH DAKOTA, USA
Re: 500, a square, 577 t rex [Re: bigdog]
      #65235 - 04/11/06 01:33 AM

Thanks for the info!!

--------------------
LIVE FREE OR DIE

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
0 registered and 33 anonymous users are browsing this forum.

Moderator:   

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2322

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved