Home | Ezine | Forums | Links | Contact
NitroExpress.com: Copper after lead?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Double Rifles

Pages: 1
LGF
.275 member


Reged: 27/04/05
Posts: 76
Loc: Kenya/Berkeley, CA
Copper after lead?
      #60864 - 06/08/06 03:12 AM

I recall reading somewhere that shooting copper bullets after shooting lead will create barrel leading problems. Is this true? Should a barrel be cleaned between bullet types?

Thanks.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Smokinjoe
.275 member


Reged: 04/05/05
Posts: 53
Loc: USA
Re: Copper after lead? [Re: LGF]
      #60887 - 07/08/06 02:40 AM

While some will tell you that the best way to clean out leading is to shoot a few copper jacketed bullets, you'll find that what usually occurs is that the jacketed slugs "smear" a lead plating about .0005 thick down the bore. This further worsens the leading problem when lead bullets are fired.
Clean the lead out......then shoot the copper.

--------------------
"This country, with its institutions, belongs to the people who inhabit it. Whenever they shall grow weary of the existing government, they can exercise their constitutional right of amending it or their revolutionary right to dismember it or overthrow it."-- Abraham Lincoln


Post Extras: Print Post   Remind Me!   Notify Moderator  
DoubleD
.400 member


Reged: 23/11/03
Posts: 2437
Loc: Retired in Oklahoma
Re: Copper after lead? [Re: Smokinjoe]
      #60888 - 07/08/06 03:12 AM

Do it in a revolver and you stand a chance of splitting the forcing cone

--------------------
DD, Ret.


Post Extras: Print Post   Remind Me!   Notify Moderator  
CptCurlAdministrator
.450 member


Reged: 01/05/04
Posts: 5284
Loc: Fincastle, Botetourt County, V...
Re: Copper after lead? [Re: Smokinjoe]
      #60889 - 07/08/06 04:25 AM

I'm in agreement with SmokinJoe. Get the lead out before shooting jacketed bullets.

It also is wise to get all copper fouling out before shooting lead. The lead has an affinity for copper, so your lead fouling will be worse if copper is in your bore.

Curl



--------------------
RoscoeStephenson.com

YOUR DOUBLE RIFLE IS YOUR BEST FRIEND.



Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
1 registered and 773 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2046

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved