Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Rem 700 416 Mag Dump Question

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

Pages: 1

pillshooter
.224 member

Reged: 05/11/05
Posts: 22
Loc: Sherwood, Oregon USA

Rem 700 416 Mag Dump Question
#57849 - 27/05/06 02:50 AM

I was finally able to take my new 700 Big Game Syn rifle out for a shoot yesterday. As instructed by many I loaded the mag full when I was shooting. All was fine with 75grns of RE15 and a 350grn Barnes but when I went to the full load of 85grns of RE15 all hell broke loose. The gun shot great and then I saw 3 rounds tumbling on to the ground. With the 85grn loads it did it every time. Short of welding my mag box closed any ideas on how to modify this problem? Best solution would be to find someone who has an off the self drop in mag bottom and catch. The rifle isn't a KS model and is a special run by remington with a BDL magazine floor plate.

Thanks

Pill Shooter

Post Extras:

mikeh416Rigby
.450 member

Reged: 24/02/03
Posts: 6051
Loc: The beautiful Oley Valley, PA....

Re: Rem 700 416 Mag Dump Question [Re: pillshooter]
#57867 - 27/05/06 08:39 AM

Most gunsmiths should be able to clear up that problem in under 10 minutes.

Post Extras:

shakari
.400 member

Reged: 09/02/03
Posts: 1107
Loc: South Africa

Re: Rem 700 416 Mag Dump Question [Re: mikeh416Rigby]
#57878 - 27/05/06 04:26 PM

FWIW A quick fix in the field can be done by simply wrapping some insulation tape around the rifle at the appropriate spot. - but as Mike says, a riflesmith should be able to fix it within a few minutes.

I had the same problem with one of my rifles and a buddy of mine made me an extended magazine box. He put an allen bolt on the floorplate, which I can undo it for cleaning etc but the rest of the time I just cycle the rounds through the action....... works a treat, and as I spend weeks and sometimes months without unloading my magazine it's the perfect solution for me........

--------------------
Steve "Shakari" Robinson
Kuduland Safaris (Africa) Ltd
info@kuduland.com
www.kuduland.com

Post Extras:

allenday
.333 member

Reged: 18/04/04
Posts: 318

Re: Rem 700 416 Mag Dump Question [Re: pillshooter]
#57888 - 28/05/06 01:25 AM

Here's what I would do:

Order a new steel triggerguard/floorplate assembly from Sunny Hill Enterprises for your Model 700. These aren't cheap, but they are of the highest quality, and they won't come open under recoil.

www.sunny-hill.com

Take you rifle to a good gunsmith and have him inlet the stock for the new part, and finish to match the rest of the metalwork.

Factory rifles in dangerous game calibers generally do not become true dangerous game RIFLES without some work.........

AD

Post Extras:

Pages: 1

Extra information

0 registered and 39 anonymous users are browsing this forum.

Moderator:

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 1447

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact