Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Shooting a shotgun accurately

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Shotguns

Pages: 1

NitroX
.700 member

Reged: 25/12/02
Posts: 39248
Loc: Barossa Valley, South Australi...

Shooting a shotgun accurately
#382301 - 04/02/24 02:48 AM

I want to shoot slugs in my Simson sideby side shotgun.

It only has a normal bead.

I'm thinking of painting a dot or a thin line centre of rib towards the rear to aid aiming.

Maybe a second small bead half way along later? Some U/O shotguns have this.

Any tips?

I'm trying out slugs in this gun as previously reported.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"

Post Extras:

93mouse
.375 member

Reged: 17/08/07
Posts: 726
Loc: Slovenia

Re: Shooting a shotgun accurately [Re: NitroX]
#382303 - 04/02/24 04:47 AM

Midbead, folding leaf sight or peep sight (folding)

Post Extras:

DarylS
.700 member

Reged: 10/08/05
Posts: 26514
Loc: Beautiful British Columbia, Ca...

Re: Shooting a shotgun accurately [Re: 93mouse]
#382311 - 04/02/24 09:26 AM

You could easily dovetail the rib and mound iron sights, perhaps a thick blade for the front & U or V notch rear.
Or- a wide V filed into an iron sight something like this.
File it down to the correct height and a small 45 degree angle will make a bead in light.
https://www.trackofthewolf.com/List/Item.aspx/874/1

and this: just file it out to a wide V
https://www.trackofthewolf.com/List/Item.aspx/880/1

The dovetails need only be 1/16" deep. A safe sided 30-corner file is used after knotching vertically "almost" the width needed.

Post Extras:

NitroX
.700 member

Reged: 25/12/02
Posts: 39248
Loc: Barossa Valley, South Australi...

Re: Shooting a shotgun accurately [Re: DarylS]
#382319 - 04/02/24 05:48 PM

Yes of course different sights can be fitted. I'm not looking to do anything elaborate. Maybe a year folding wide Eventually?

Initially I will measure and paint on a small white dot or line to I'd in accurate ai ING or pointing.

Then test the slugs. If they shoot terribly ehhy bother with new sights. Heavy shot, buck shot, BBs will be the limit.

I assume shooting slugs from a side by side, one uses similar techniques to a double rifle. If shooting from a bench, rest the forend hand on a bag, not the gun itself.

I'd try say 25 yards first.Then 50 yards if 25 yards goes well. 75 and 100 yards dream ranges. I don't have a lot of slugs. Give it a try first. Should get early successor failure indications early on.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"

Post Extras:

DarylS
.700 member

Reged: 10/08/05
Posts: 26514
Loc: Beautiful British Columbia, Ca...

Re: Shooting a shotgun accurately [Re: NitroX]
#382333 - 05/02/24 04:29 AM

Yes, forend in hand, hand on bag. No rear bag and sit as high as possible, not crouched down low.
I do my slug testing at 30yards, as that is my perceived absolute maximum range for bear defense.
Even at only 25 or 30 yards, a bear is not a direct enough threat (according to the game branch) to warrant shooting.
The Winchester 3" 1 ounce Fosters @ 1,750fps and the 2 3/4" 1 1/8ounce Gualandi DGS slugs @ 1,610fps both shoot into 2"(5 shots) at 30yards from my Mossy.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras:

Pages: 1

Extra information

0 registered and 7 anonymous users are browsing this forum.

Moderator: NitroX

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 273

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact