Home | Ezine | Forums | Links | Contact
NitroExpress.com: 8mm Lee Speed

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Lee Speed Forum & Archive

Pages: 1
Rolland
.333 member


Reged: 31/12/06
Posts: 281
Loc: Camp Verde, AZ
8mm Lee Speed
      #371336 - 11/11/22 12:32 PM

What cartridge is used in a 8mm Lee Speed

Post Extras: Print Post   Remind Me!   Notify Moderator  
Hunter4752001
.300 member


Reged: 25/01/10
Posts: 120
Loc: Australia
Re: 8mm Lee Speed [Re: Rolland]
      #371344 - 11/11/22 03:20 PM

According to DocAV it was the 8x50R M93 cartridge as used in the Austrian Mannlicher.

https://forum.cartridgecollectors.org/t/8mm-for-the-lee-speed-rifle/5253

I'm pretty sure I've also seen that in an old catalogue. Still loaded in India as the .315 Indian.


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39063
Loc: Barossa Valley, South Australi...
Re: 8mm Lee Speed [Re: Hunter4752001]
      #371347 - 11/11/22 03:37 PM

Quote:

According to DocAV it was the 8x50R M93 cartridge as used in the Austrian Mannlicher.

https://forum.cartridgecollectors.org/t/8mm-for-the-lee-speed-rifle/5253

I'm pretty sure I've also seen that in an old catalogue. Still loaded in India as the .315 Indian.




A thread discussing 8mm cartridges including the above .315, which may be of help.

http://forums.nitroexpress.com/showflat.php?Cat=0&Number=227982&an=&page=0&vc=1

Modern day hunting of Man-Eaters in India

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
lancaster
.470 member


Reged: 06/05/08
Posts: 8664
Loc: There's a lighthouse in the mi...
Re: 8mm Lee Speed [Re: NitroX]
      #371370 - 12/11/22 04:45 AM

the 8x50R, use PRVI 8x56 R brass, resize and cut to 50 mm length

modern .323 bullets are not the best but will work. you need a long cylindrical bullet of 200 grains or better heavier.

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rolland
.333 member


Reged: 31/12/06
Posts: 281
Loc: Camp Verde, AZ
Re: 8mm Lee Speed [Re: lancaster]
      #371382 - 12/11/22 10:22 AM

This is the rifle in question, has a full rib on the barrel and marked BSA C2 on the receiver stock mount under the bolt handle, other question is what is the bracket on the left side of the stock, I assume a telescope mount? I would say it is in 95 % condition there are no serious marks or blemishes other than one sight blade is missing and replaced with a modern one.








Post Extras: Print Post   Remind Me!   Notify Moderator  
lancaster
.470 member


Reged: 06/05/08
Posts: 8664
Loc: There's a lighthouse in the mi...
Re: 8mm Lee Speed [Re: Rolland]
      #371403 - 12/11/22 04:24 PM

yes, I take it. please send it to my home. thanks

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians


Post Extras: Print Post   Remind Me!   Notify Moderator  
Hunter4752001
.300 member


Reged: 25/01/10
Posts: 120
Loc: Australia
Re: 8mm Lee Speed [Re: lancaster]
      #371406 - 12/11/22 07:13 PM

Hi Rolland. Could you post a close up of the right-hand receiver stock mount area under the bolt handle?

I suspect that the "BSA C2" is actual BSA Co with the o on top of an underscore. Its a common confusion when the o isn't as distinctly stamped as it should have been.

Only a guess, but I think the bracket on the left side may have been a mount for a type of folding aperture sight that was popular at the time. Not quite the same as the common BSA No9 sight, but similar.

Does the right-hand receiver stock mount show a royal cypher (ie a crown) or the words "Lee Speed Patents"? Does it have a date?


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rolland
.333 member


Reged: 31/12/06
Posts: 281
Loc: Camp Verde, AZ
Re: 8mm Lee Speed [Re: Hunter4752001]
      #371605 - 19/11/22 02:15 PM

Hunter
You are correct it is Co just hard to read. No other markings other than what is pictured.
On another note does anyone have drawings of the 8 x 50R Austrian cartridge Ie; as to overall lenght

Edited by Rolland (19/11/22 02:16 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Hunter4752001
.300 member


Reged: 25/01/10
Posts: 120
Loc: Australia
Re: 8mm Lee Speed [Re: Rolland]
      #371606 - 19/11/22 05:25 PM

CIP Standard for 8x50R Austrian is about 3/4 of the way down the page.
https://bobp.cip-bobp.org/en/tdcc_public?page=2&cartridge_type_id=2


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26414
Loc: Beautiful British Columbia, Ca...
Re: 8mm Lee Speed [Re: Hunter4752001]
      #371608 - 19/11/22 06:07 PM

8x50R:*******************C.I.P. Pezio******CUP copper Crusher

8x50R************************51*********************45********

http://kwk.us/pressures.html

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rolland
.333 member


Reged: 31/12/06
Posts: 281
Loc: Camp Verde, AZ
Re: 8mm Lee Speed [Re: DarylS]
      #371657 - 21/11/22 06:14 AM

Next step is to find loading dies.

Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 3954
Loc: Nth QLD Australia
Re: 8mm Lee Speed [Re: Rolland]
      #371660 - 21/11/22 06:23 AM

Quote:

This is the rifle in question, has a full rib on the barrel and marked BSA C2 on the receiver stock mount under the bolt handle, other question is what is the bracket on the left side of the stock, I assume a telescope mount? I would say it is in 95 % condition there are no serious marks or blemishes other than one sight blade is missing and replaced with a modern one.



Looks like a peep sight base to me - possibly a Mues?
https://www.enfield-rifles.com/mues-special-sight_topic7387.html
could be one of these too
https://www.leeenfieldresource.com/aperture-sights

Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26414
Loc: Beautiful British Columbia, Ca...
Re: 8mm Lee Speed [Re: 93x64mm]
      #371665 - 21/11/22 08:37 AM

Appears similar to the Mues Special Sight.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rolland
.333 member


Reged: 31/12/06
Posts: 281
Loc: Camp Verde, AZ
Re: 8mm Lee Speed [Re: DarylS]
      #371667 - 21/11/22 10:48 AM

Found the sight what a complicated sight.

BSA, for No1 Mk3, 1910, UK. Simple, reliable, forward post is equipped with volley sight peep hole to comply with early competition regulation, plus a going to war requirement when shooters went to WW1 and took their sights with them. Eye relief is controlled by using different shaped mounting plates. Status; Not common but available, collectible.

Edited by Rolland (21/11/22 10:50 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39063
Loc: Barossa Valley, South Australi...
Re: 8mm Lee Speed [Re: Rolland]
      #371674 - 21/11/22 04:29 PM

Wow, looks complicated. I guessed it was a peep sight of some type.

WW1 sniper!

Btw I like the idea of a .315/8mm Indian Lee Speed. Something different and exotic.

With imagination one could imagine it being used on axis, sambar, boar, leopard, tiger, buffalo and gaur! Perhaps some if them without imagination such as boar and nilgai.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
lancaster
.470 member


Reged: 06/05/08
Posts: 8664
Loc: There's a lighthouse in the mi...
Re: 8mm Lee Speed [Re: NitroX]
      #371691 - 22/11/22 12:33 AM

some years ago there was a basic model in 8x50R here in auction, sold for 200-300 euro
still angry about myself for don't buy this

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians


Post Extras: Print Post   Remind Me!   Notify Moderator  
darwinmauser
.300 member


Reged: 07/05/07
Posts: 217
Loc: Darwin NT
Re: 8mm Lee Speed [Re: lancaster]
      #373641 - 30/01/23 08:54 PM

It would be nice to see the photo's reposted if it's possible.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
1 registered and 10 anonymous users are browsing this forum.

Moderator:  NitroX 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 3099

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved