Home | Ezine | Forums | Links | Contact
NitroExpress.com: Rigby The Revolutionary

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

Pages: 1
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39896
Loc: Barossa Valley, South Australi...
Rigby The Revolutionary
      #372085 - 07/12/22 02:40 AM

Rigby The Revolutionary

See link for articles and images:
https://gundigest.com/gear-ammo/ammunition/rigby-the-revolution/amp

Philip Massaro
4 days ago

Rigby cartridges remain undeniably classic chamberings for any generation or pursuit.

We spotted the boar crossing a cut lane and immediately put on a stalk; he was worthy of attention. His profile alone indicated a good, mature hog, with no doubt he was a shooter, even at 200 yards. Turning the corner, we saw the boar run. I swung on his shoulder and broke the trigger as it crossed the vertical plane of his vitals. I heard the bullet strike, and despite the fact that the rains had just subsided, we found blood quickly. As it has done so many times over the last century, the .275 Rigby had done its job neatly and effectively.

John Rigby & Company can trace its roots to Dublin, Ireland, in 1775, through to London, England, today; in spite of a short jaunt here in the United States, the company is situated where it belongs, making fantastic firearms worthy of the pedigree. But what so many people overlook is Rigby’s contributions to the cartridge world, and their effect on the modern ballistics.
Rigby-feature
(Left to right) The .450 3¼-inch Nitro Express, .275 Rigby, .350 Rigby Magnum, .416 Rigby and .450 Rigby. Photo: Massaro Media Group.
All That’s Gold Does Not Glitter

I’m sure that even the novice rifleman could name one or two cartridges with the Rigby surname, yet one of the most important doesn’t bear the family name or even get the credit worthy of its performance. It did, single-handedly, set the benchmark for a dangerous-game-stopping rifle, though its tenure was cut short due to some colonial insurrections.

The .450 3¼-inch Nitro Express was developed by John Rigby & Co. in 1898. There were other .450s designed for use with blackpowder, but Rigby’s .450 NE was the first Nitro Express cartridge designed for use with “nitro” or smokeless powder. It’d drive a 480-grain bullet to a muzzle velocity of 2,150 fps and would become the favorite of many traveling sportsmen and professional hunters alike, until the Crown banned all .450-caliber ammunition in its colonies in 1907, due to the uprisings in India and Sudan. (The concept was to deny access to those colonials with .577-450 Martini-Henry rifles.) To circumvent the problem, many companies designed a cartridge with similar ballistics, like the .470 NE, the .475 NE and the .475 No. 2 Jefferies. Still, to this day, the .450 3¼-inch NE makes a perfect choice for the dangerous game hunter.
Hornady-450-NE
The .450 Nitro Express became the benchmark for dangerous work and was mimicked by the .470 NE, .458 Win. Mag. and many more. Photo: Massaro Media Group.

The ballistic formula of the .450 NE would go on to inspire Winchester’s 1956 .458 Winchester Magnum, which did its best to replicate the concept, though it certainly fell short. Using a 510-grain bullet at an advertised muzzle velocity of 2,150 fps, the .458 Winchester didn’t reach those numbers for at least four decades. Though the .470 Nitro Express would become the most popular of the rimmed cartridges for single-shots and double rifles in this class, Rigby’s .450 NE remains a solid choice for any hunter.
The 7×57 Rigby. Wait, What?

John Rigby & Co. had a business arrangement with Mauser of Germany in the late 19th century, importing their fantastic Model 98 actions and giving them British stocks and appointments. Rigby offered the 7x57mm Mauser as one of the chambering for their rifles—understandably, it was and is a fantastic hunting cartridge—but decided to rename the cartridge to make it more palatable to the British market. This wasn’t uncommon; the .404 Jeffery was known as the 10.75x73mm on the European continent.
Hornady-275-Rigby
The .275 Rigby is simply the 7×57 Mauser using an alias. Photo: Massaro Media Group.

The .275 Rigby is, was and ever shall be nothing more and nothing less than the 7x57mm Mauser, and that’s certainly not a bad thing. The classic design uses the full gamut of the 7mm bullets, with the 175-grain bullets having made the reputation for the cartridge. But anyone interested in the .275 Rigby should be aware of the .275 Rigby HV chambering. The lead of the chamber has been revised to optimize performance with the 140-grain spitzer bullet; the HV chamber won’t accept the 175-grain bullets, and only a handful of the 150-, 156- and 160-grain bullets will work in the HV chamber.

Walter Dalrymple Maitland Bell—better known as Karamojo—used the .275 Rigby for his legendary ivory hunts across the African continent. Col. Jim Corbett used the .275 Rigby rifle presented to him for killing the Champawat tigress to end the careers of many more man-eaters. I’ve had the pleasure of holding Corbett’s rifle. It’s a lightweight, well-balanced gun, and though it bears no sign of either bluing or stock finish due to exposure to the elements while on the hunt, it remains a classic Rigby design. Bell and Corbett are just two examples of hunters who’ve risked their lives among the world’s most dangerous game with a .275 Rigby in hand.
Rigby Highland Stalker 3
Rigby’s Highland Stalker is a classy rifle, and when chambered for the .275 Rigby makes a great choice for nearly all big-game hunting. Photo: Massaro Media Group.

The .275 Rigby isn’t a speed demon, but it isn’t a slow poke, either. In fact, I feel it makes a better choice than a .243 Winchester or .30-30 for a young hunter: Its recoil level is wonderfully mild, yet the cartridge has a bullet weight selection suitable for everything south of the true heavyweights.
The Perfect Medium?

The .350 Rigby Magnum came in 1908 and was an absolute original. Using a 45-degree shoulder—which would carry over to the .416 Rigby—on a rimless case, the .350 Rigby is a sensible design. It has a rim diameter close enough to the .375 H&H that the same bolt face will handle both cartridges. The .350 Rigby Magnum will use the .358-inch diameter bullets common to the .358 Winchester, .35 Whelen, .358 Norma Magnum and .350 Remington Magnum.
350-Rigby
The .350 Rigby Magnum was released in 1908 and still makes a great big-game cartridge. Photo: Massaro Media Group.

The classic .350 Rigby load sees a 225-grain spitzer bullet leaving the muzzle at 2,600 fps, making it a wonderfully effective choice for larger game. It was used as an all-around choice, but many hunters found there were better choices for thick-skinned, dangerous-game animals. It was a favorite of both Denys Finch Hatton and Bror von Blixen-Fineke. They found it to make a perfect light rifle on safari, and John “Pondoro” Taylor sang its praises as well, putting it on an equal plane with the .318 Westley Richards and .375 H&H Magnum as a do-all cartridge.
Kynoch-350
.350 Rigby Magnum ammunition from Kynoch, in the classic 225-grain roundnose configuration. Photo: Massaro Media Group.

Component cases are available from Roberson Cartridge Company, and there are all sorts of excellent bullets to choose from, with reliable load data provided in the Woodleigh Reloading Manual. I’m aiming for a 250-grain bullet at 2,650 fps or thereabout, as the .350 Rigby Magnum has nearly the same case capacity as the .358 Norma Magnum. If you’re looking for a beefy cartridge that’s not your run-of-the-mill choice, the .350 Rigby Magnum should be on your list for sure.
Head of the Class

All you have to do is mention African dangerous game cartridges, and it’ll be a matter of seconds before someone throws the .416 Rigby into the mix. And that’s a good thing. It remains one of the best choices for the thick-skinned dangerous game animals.
416-Rigby-No2
The .416 Rigby No. 2 has the same ballistics as its older, rimless variant, but it features a rim…making it easier for use in single-shot and double rifles. Photo: Massaro Media Group.

While the cartridge has always enjoyed a great reputation, not many Rigby rifles were chambered for it during the Golden Age of safari. In fact, from its release in 1911 until the outbreak of World War II, less than 170 .416 Rigby rifles were in circulation. It was a favorite of professional hunters, but being a proprietary cartridge, the .416 Rigby was certainly not as popular as the .375 H&H Magnum or the .404 Jeffery. It was, undoubtedly, Robert Ruark’s Horn of the Hunter that cemented the .416 Rigby’s place among the great cartridges. From 1911 until the late 1980s, the .416 Rigby was the only commercial cartridge in the bore diameter, and the case—much like the .350 Rigby Magnum—is a unique design having no parent case.
Federal-Premium-Safari-416
Topped with a 400-grain Woodleigh Hydrostatically Stabilized Solid, the Federal Safari .416 Rigby ammo is suitable for anything that walks. Photo: Massaro Media Group.

The .416 Rigby was advertised to drive a 410-grain bullet at a muzzle velocity of 2,300 fps. Dr. Kevin Robertson, however, tested some vintage Rigby ammunition and found the actual speed to be right around 2,150 fps—such is the way of things when dealing with century-old designs. Most modern loads use a 400-grain at velocities between 2,300 and 2,400 fps, generating somewhere around 5,000 ft-lb of energy, and there are a few different bullet weights up and down. I like the Woodleigh 450-grain Weldcore softpoint and full metal jacket solid loaded in the Norma African PH line at 2,150 fps. If you felt the .416 Rigby lacked anything as a stopping rifle, this pair of bullets will alleviate your worries.
Rigbys-Chamber
The Rigby receiver markings on their Big Game rifle. Photo: Massaro Media Group.

The .416 Rigby should be housed in a magnum-length receiver, and that big case—designed to combat the effects of tropical heat on cordite, keeping the pressures low enough for reliable extraction—will eat up magazine space. Many .416 rifles will have an Oberndorf-style magazine extension in order to get additional cartridges in the magazine. The 45-degree shoulder gives good headspacing, and the low pressure the cartridge generates remains an attractive feature to many African hunters.

As a side note, in 2019, Rigby announced the release of the .416 No. 2, a flanged or rimmed version of the .416 Rigby with identical ballistics, to be used in double rifles.
The Youngest Sibling

While the previous four cartridges are all well over a century old, the most powerful of the lineup was released in 1994, when Paul Roberts—then at the head of Rigby—necked the .416 Rigby case up to hold .458-inch-diameter bullets, creating the .450 Rigby to give better performance on dangerous game. Norma uses a 500-grain solid at a smoking 2,500 fps for over 6,900 ft-lb of muzzle energy, as well as the 550-grain Woodleigh pair at 2,100 fps. Nosler offers their 500-grain Partition at 2,350 fps for 6,130 ft-lb.
Norma loads the 550-grain Woodleigh Weldcore softpoint and FMJ (shown here) in the .450 Rigby at a muzzle velocity of 2,100 fps. Photo: Massaro Media Group.

While it sounds horrific on the shoulder, the Rigby rifle I shoot fits me well, so recoil is more than manageable, being more of the classic push than the violent slap associated with cartridges that are both heavy and fast. If you feel the .416 Rigby doesn’t check all the boxes—and for the life of me I can’t imagine why you’d feel that way—the .450 Rigby offers a step up in horsepower for the biggest beasties, though the availability of ammunition pales in comparison to its older brother.
The Rigby Legacy

There’s no denying the importance of Rigby’s developments on the cartridge world. Consider the popularity of the .275 Rigby—in spite of it being a rebranding of the 7mm Mauser—because of the exploits and writings of Bell and Corbett, and the fact that they gave the world the .416-inch bore diameter.
Four of Rigby’s namesakes: the .275 Rigby, .350 Rigby Magnum, .416 Rigby and .450 Rigby. Photo: Massaro Media Group.

Couple that with their .450 3¼-inch Nitro Express, which set the benchmark for dangerous game rifles, and you’ve got an indelible mark on the hunting world. And to be honest, I don’t know anyone who hunts with a Rigby cartridge and isn’t enamored with it.

Editor's Note: This article originally appeared in the July 2021 issue of Gun Digest the Magazine.

More Rigby Articles:

Heirloom-Worthy Performance Of The Rigby Highland Stalker
Greatest Cartridges: .416 Rigby
Rigby Big Game Marks Renewel Of Renowned Partnership
Video: .416 Rigby Safari Rifle


Categories: Ammunition, Gear & Ammo, Gun Articles
Tags: .275 Rigby, 416 Rigby, ammo, Ammunition, Big Bore, Rigby

×

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
eagle27
.400 member


Reged: 24/01/09
Posts: 1165
Loc: Rolleston, Christchurch, New Z...
Re: Rigby The Revolutionary [Re: NitroX]
      #372102 - 07/12/22 04:37 PM

I guess these couple of paragraphs taken from above provide the best enlightenment I've seen of the old argument, is the .275 Rigby cartridge a different cartridge than the 7x57. It would seem not despite what may be on the Rigby cartridge packet and head-stamp.
No different than say Australian made AR2208 powder repackaged and sold as Hodgdon Varget powder. It is still AR2208 powder. The .275 Rigby is still the 7x57 cartridge.

John Rigby & Co. had a business arrangement with Mauser of Germany in the late 19th century, importing their fantastic Model 98 actions and giving them British stocks and appointments. Rigby offered the 7x57mm Mauser as one of the chambering for their rifles—understandably, it was and is a fantastic hunting cartridge—but decided to rename the cartridge to make it more palatable to the British market. This wasn’t uncommon; the .404 Jeffery was known as the 10.75x73mm on the European continent.
Hornady-275-Rigby
The .275 Rigby is simply the 7×57 Mauser using an alias. Photo: Massaro Media Group.

The .275 Rigby is, was and ever shall be nothing more and nothing less than the 7x57mm Mauser, and that’s certainly not a bad thing. The classic design uses the full gamut of the 7mm bullets, with the 175-grain bullets having made the reputation for the cartridge. But anyone interested in the .275 Rigby should be aware of the .275 Rigby HV chambering. The lead of the chamber has been revised to optimize performance with the 140-grain spitzer bullet; the HV chamber won’t accept the 175-grain bullets, and only a handful of the 150-, 156- and 160-grain bullets will work in the HV chamber.


Post Extras: Print Post   Remind Me!   Notify Moderator  
3DogMike
.400 member


Reged: 29/01/15
Posts: 1465
Loc: Western Slope, Colorado USA
Re: Rigby The Revolutionary [Re: eagle27]
      #372116 - 08/12/22 04:23 AM

Small point:
Aside from the debate about the modern day moniker ".275 Rigby".
Period ammunition was seemingly marked simply 7x57 Mauser, .275 Mauser, or .275 High Velocity for Rigby Rifles

I am not at all sure about the original Rigby rifles, such as my early 1930's example marked "Sighted For Rigby Special High Velocity .275 Bore Cartridge Pointed Bullet 140 Grains", having a chamber leade/throat being "revised" and cut specifically (and only) for the 140 grain pointed bullet.
As an aside; the proof marks do not differentiate between "normal" 7x57/.275 and the .275HV.

My Rigby is assumedly un altered and will easily take the standard 175 grain round nose bullet. The bore and throat exhibit only the 90 years worth of careful use, no evidence of a later (ie: fresher less worn looking) "re-throat"

To my thinking it would make no sense in the old days to have a ".275" that would be restricted to only .275HV cartridges.
"If" one were off somewhere in remote Africa, India, East Asia and there were no locally available .275HV ammunition it would be very desirable to be able to use the traditional 175 grain 7x57 ammunition that might be more commonly available? Relatively simple to adjust sighting to compensate.

I must take my Rigby .275HV out one day with both types of ammo and see what difference there is in bullet trajectory out to ~200 yards.

Now this is not to say that modern Rigby rifles do not have leade/throat specific to the 140 Grain loading.

Just my 2¢ (or 2p) worth.
- Mike

--------------------
"Will Rogers never met a fighter pilot"
- Anon

“Always carry a flask of whiskey in case of snakebite, and furthermore always carry a small snake."
-- W. C. Fields


Post Extras: Print Post   Remind Me!   Notify Moderator  
degoins
.333 member


Reged: 28/02/06
Posts: 435
Loc: SC, USA
Re: Rigby The Revolutionary [Re: 3DogMike]
      #372119 - 08/12/22 05:59 AM

My experience has been the same as yours Mike. My 1910 Rigby .275 HV will easily chamber the 175 gr. bullets. I have not fired any yet though.

Post Extras: Print Post   Remind Me!   Notify Moderator  
CarlsenHighway
.300 member


Reged: 19/03/09
Posts: 149
Loc: Port Chalmers, New Zealand
Re: Rigby The Revolutionary [Re: degoins]
      #372129 - 08/12/22 09:34 PM

The .275 Rigby is NOT one of Rigby's namesakes.

There was no such cartridge name as the "".275 Rigby"". The writer like many Ameirican gunwriters just assumes its a real thing because he read some other article that was also wrong. This name is like a virus.

It was always just called the .275. Rigby had nothing to do with the cartridge or its name, other than they chambered rifles and sold ammunition in what was a popular chambering. Even the ammo that Rigby repackaged and sold as ".275 bore" or "".275 High Velocity" was made by German manufacturers, like Geco.

This persistent idea that the .275 is actually called the ".275 Rigby" and that it was a proprietary cartridge of theirs probably comes from people not understanding that Rigby advertised their Mauser rifles as "Rigby-Mausers" and when you bought one chambered in .275, then one might call it a .275 Rigby-Mauser. But the Rigby bit refers to the rifle brand name - not the cartridge!

The first one to ever call the .275 (or the 7x57) a ".275 Rigby" was not John Rigby &Co, they have never done it in any form or catalogue until the recent new company was formed - the first mention of it I can find was by Jack O'Connor in an article in the 1970's, and American writers have followed his lead in this error ever since. British writers in general have not. The usually know it was just called a .275.

If you read the old authors you plainly see that they are aware that a .275 (or sometimes called a .276) is a 7mm Mauser. And you will never see them call it a ".275 Rigby", not will you ever find an original Rigby-Mauser rifle with a cartridge marking of .275 Rigby or any catalogue listing in that name.

Just a big modern misunderstanding. And the notion that the .275 HV was actually a different chambering is balderdash: the HV load was the standard 140 grain load they offered ammo in, and regulated their rifles sights for. (In the UK in those days, the gunmaker sighted the rifle for the ammo you wanted.) The load was more appropriate for deerstalking in Scotland. Rigby didnt even have anything to do with that ammo either, they were reselling repackaged ammo made by other people under their own name - like the rifles themselves.

Please stop promulgating the ".275 Rigby". It sounds likely, but its actually a fantasy cartridge name. But with the internet, it's spreading. The new Rigby company are pretending they invented it and its a real name - (they are young men and probably dont know any better) and now even Hornady are offering brass headstamped .275 Rigby.

It has never existed before - but now it seems to be flourishing. The internet has talked it into existing.

--------------------
If you carry a cat home by the tail you will receive information valuable to you for the rest of your life.
Mark Twain


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39896
Loc: Barossa Valley, South Australi...
Re: Rigby The Revolutionary [Re: CarlsenHighway]
      #372131 - 08/12/22 10:29 PM

Quote:



Please stop promulgating the ".275 Rigby". It sounds likely, but its actually a fantasy cartridge name. But with the internet, it's spreading. The new Rigby company are pretending they invented it and its a real name - (they are young men and probably dont know any better) and now even Hornady are offering brass headstamped .275 Rigby.

It has never existed before - but now it seems to be flourishing. The internet has talked it into existing.




Well people have referred to it as such for over half a century. During which time the cartridge almost died out of existence.

We can thank Rigby for it's resurrection in larger numbers and increasing popularity. With their Highland Stalker for example. I think a .275 Mauser or 7x57 is the ideal Scottish stag hunting rifle. Traditional. Also the recreation of Corbett and Bell .275s in Rigby form. Rigby is also a great modern show marketer. Gets their message to the potential customers.

It in the end it's just a cartridge.

I have called it a .275 Mauser or a 7x57 Mauser now. Since the thread clearly proving a ".275 Rigby" cartridge name never existed. Try changing virtually everyone not in the NE forums ? Ha ha, not going to happen.

One reason for its nomenclature is heavily because the .275 Bore was so associated with Rigby Mausers throughout the UK and British Empire. Other British makers had .275 Mausers but never quite the association, even if equally nice sporters. Continental hunters no doubt wonder what all the Brit fuss is with the 7x57.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Edited by NitroX (09/12/22 02:43 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
3DogMike
.400 member


Reged: 29/01/15
Posts: 1465
Loc: Western Slope, Colorado USA
Re: Rigby The Revolutionary [Re: NitroX]
      #372138 - 09/12/22 02:37 AM

+1 to Carlsen and Nitro John,

The moniker ".275 Rigby" is set in cement now, at least in the USA. Hornady actually head stamped a run of ammo as such, and Ruger has marked the No.1 as ".275 Rigby".
Not historically proper, but also not going to change. Those of us with interest in history and proper language usage can sniff at that , but it isn't going to alter the gun writers or average blokes terminology.

…...Then there is the bureaucratic mess getting your rifle/ammunition into some of the places in Africa when the ammunition one is using is not exactly as marked on the rifle. I wonder how that works out?

- Mike

The real thing, marked on the receiver ring: "Sighted For Rigby Special High Velocity .275 Bore Cartridge Pointed Bullet 140 Grs"


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 27009
Loc: Beautiful British Columbia, Ca...
Re: Rigby The Revolutionary [Re: 3DogMike]
      #372142 - 09/12/22 05:29 AM

Now I wish I still had my BRNO in .275 Rigby. It shot 160gr. TSX's at 2,700fps, very nicely.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
Marrakai
.416 member


Reged: 09/01/03
Posts: 3595
Loc: Darwin, Top End of Australia
Re: Rigby The Revolutionary [Re: DarylS]
      #372155 - 09/12/22 01:47 PM

Quote:

There was no such cartridge name as the "".275 Rigby""



CarlsenHighway:
I might suggest checking out the cartridges offered for sale by Mantons of Calcutta, on page 104 of their 1925 "Centenary Catalogue and Price List".
Right beside the .275 Mauser, they picture and name the .275 Rigby, No.2HV. That's just a couple of years shy of a full century of referring to the 140gr loaded cartridge as the .275 Rigby.
And that's in the hunting fields of the Raj, where arguably most of these cartridges were expended at game.

So although I may occasionally share your frustration at incorrect cartridge nomenclature, I am at a loss to understand this inexplicable dogma surrounding reference to the .275 Rigby.

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au


Post Extras: Print Post   Remind Me!   Notify Moderator  
eagle27
.400 member


Reged: 24/01/09
Posts: 1165
Loc: Rolleston, Christchurch, New Z...
Re: Rigby The Revolutionary [Re: Marrakai]
      #372157 - 09/12/22 06:38 PM

Quote:

Quote:

There was no such cartridge name as the "".275 Rigby""



CarlsenHighway:
I might suggest checking out the cartridges offered for sale by Mantons of Calcutta, on page 104 of their 1925 "Centenary Catalogue and Price List".
Right beside the .275 Mauser, they picture and name the .275 Rigby, No.2HV. That's just a couple of years shy of a full century of referring to the 140gr loaded cartridge as the .275 Rigby.
And that's in the hunting fields of the Raj, where arguably most of these cartridges were expended at game.

So although I may occasionally share your frustration at incorrect cartridge nomenclature, I am at a loss to understand this inexplicable dogma surrounding reference to the .275 Rigby.




According to COTW there was also a .275 Rigby No.2 Magnum cartridge loaded with 140gr bullets at 2675fps but this was a flanged cartridge for Rigby double rifles.

I think where the 'argument' re .275 Rigby and 7mm Mauser/7x57 has reared it's head early on has arisen from statements from some quarters that the .275 Rigby case and 7mm Mauser case were slightly different in dimensions. This is obviously a fallacy.

Understandably those with Rigby rifles, old or newly manufactured marked .275 may wish to have their cartridges headstamped .275 Rigby for crossing borders where such detail may matter to border control however to have a run of the mill Mauser customised and marked .275 Rigby is probably more a vanity project.

Edited by eagle27 (09/12/22 06:39 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
PatagonHunter
.333 member


Reged: 20/01/06
Posts: 255
Loc: Bariloche, Patagonia Argentina
Re: Rigby The Revolutionary [Re: eagle27]
      #373510 - 27/01/23 09:12 AM

Hi,

Agree 100% with Carlsen! The 7mm Mauser Rigby rifles were entirely made in Germany! Even with the sights on! And, of course, the chamber-barrel specifications were the same for the High Velociy and for the "normal" one as well. The sight were regulated for the 140 gr bullet at 2700 /2750 f/s (in the real world...) with their standard 25" barrel lenght.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rothhammer1
.400 member


Reged: 06/01/17
Posts: 1829
Loc: The Redwoods of California
Re: Rigby The Revolutionary [Re: eagle27]
      #373517 - 27/01/23 03:49 PM

Quote:

Quote:

Quote:

There was no such cartridge name as the "".275 Rigby""



CarlsenHighway:
I might suggest checking out the cartridges offered for sale by Mantons of Calcutta, on page 104 of their 1925 "Centenary Catalogue and Price List".
Right beside the .275 Mauser, they picture and name the .275 Rigby, No.2HV. That's just a couple of years shy of a full century of referring to the 140gr loaded cartridge as the .275 Rigby.
And that's in the hunting fields of the Raj, where arguably most of these cartridges were expended at game.

So although I may occasionally share your frustration at incorrect cartridge nomenclature, I am at a loss to understand this inexplicable dogma surrounding reference to the .275 Rigby.




According to COTW there was also a .275 Rigby No.2 Magnum cartridge loaded with 140gr bullets at 2675fps but this was a flanged cartridge for Rigby double rifles.

I think where the 'argument' re .275 Rigby and 7mm Mauser/7x57 has reared it's head early on has arisen from statements from some quarters that the .275 Rigby case and 7mm Mauser case were slightly different in dimensions. This is obviously a fallacy.

Understandably those with Rigby rifles, old or newly manufactured marked .275 may wish to have their cartridges headstamped .275 Rigby for crossing borders where such detail may matter to border control however to have a run of the mill Mauser customised and marked .275 Rigby is probably more a vanity project.





From 1939 Stoeger:







--------------------
Citizen of the Cherokee Nation


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 106 anonymous users are browsing this forum.

Moderator:  NitroX 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2701

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved