Home | Ezine | Forums | Links | Contact
NitroExpress.com: NitroX Test Results With Your 450 No2?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Double Rifles

Pages: 1
NE450No2
.375 member


Reged: 10/01/03
Posts: 942
NitroX Test Results With Your 450 No2?
      #3650 - 08/07/03 12:55 PM

NitroX
Have you shot your 450 No2 yet. If so tell us about it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39885
Loc: Barossa Valley, South Australi...
Re: NitroX Test Results With Your 450 No2? [Re: NE450No2]
      #3683 - 09/07/03 12:32 AM

NE450 No 2

No. It sits in the cormer crying, saying "Why don't you take me out more? Don't you love me?"

I need to think about things a long time before acting

Actually I'm still trying to get some loads in Australian ADI powders first. If I can work out some usuable loads in ADI it will save me a lot of $$$ in powder costs. It may be hard to get the right imported powders too as generally everyone here now uses ADI.

Failing that I will try to source the right powders and give your suggested loads a try.




--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
NE450No2
.375 member


Reged: 10/01/03
Posts: 942
Re: NitroX Test Results With Your 450 No2? [Re: NitroX]
      #3701 - 09/07/03 03:03 AM

NitroX
I tried to e-mail you some additional info, but maybe it did not make it.
Maybe this will help. ADI AR2209 is slightly slower burning than RL-15. I would start with the recommended load for RL-15, and substitute ADI AR2209 and just work up until the load regulates properly in your rifle. Watching for pressure signs of course. Do not forget with the big case of the 450 No2 you must use a filler.
You could also use ADI AR2213 as it burns just a little faster than IMR4831, but all the experts seem to favor RL-15, so I would start with AR2209.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 82 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2241

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved