Home | Ezine | Forums | Links | Contact
NitroExpress.com: Ultimate fox medecine….

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

Pages: 1
DORLEAC
.333 member


Reged: 22/01/12
Posts: 465
Loc: Perpignan, France
Ultimate fox medecine….
      #352032 - 05/04/21 10:57 PM


Or how to play and have fun with a .17 Remington.
The starting base is one of the very first Remington SA produced circa 1973 in this caliber, an interesting n.i.b version with a medium weight stainless steel barrel, virgin of any shot.
The rest of the story is just a gunsmith hobby to make it the dream tool to purge the vermin.
In the end, not much remains of the original rifle except its wonderful barrel that brings out the 20gr Norma V-MAX at 4200 ft/s in a single ragged hole.
There's not a fox who will complain!

Regards to all.

DORLEAC
www.dorleac-dorleac.com


























Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 27005
Loc: Beautiful British Columbia, Ca...
Re: Ultimate fox medecine…. [Re: DORLEAC]
      #352035 - 06/04/21 12:55 AM

Joel - you never cease to amaze. Absolutely lovely.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39889
Loc: Barossa Valley, South Australi...
Re: Ultimate fox medecine…. [Re: DarylS]
      #352049 - 06/04/21 03:02 PM

Very nice Joel/ Is it yours or for a client? Or on spec?

A rifle and cartridge very much in demand in Australia in those early days for the fox fur trade.

But no where near as nice and classy as this re-creation!

As again thank you very much for your support and participation on the NE forums amazing us with your quality work.

I want one of your rifles before you get too expensive!

I have never owned a .17 Remington. But it was as said much used on spotlight fox shooting for skins. Reportedly a broadside chest shot MIGHT damage the far side skin? I don't know. I lusted for a .17 K-Hornet. Never happened and continued with my carious and numerable .222s, .222R and now a .223. And .22 RFs and .22 M RFs. The sub-.22 centrefire or rimfire never acquired.

The rifle is way too lovely to "bang around" in the back of a utility on a frosty spotlight fox culling expedition.

BTW did do the daylight fox culling expedition with shotguns and drives, the last fox cull of the season a couple of weekends ago. 51 foxes removed from the farms. No furs unfortunately, as it is too early in the season for a decent winter furs. They are culled now before the young ones get older and smarter and just before the lambing season starts and poison baiting starts on the farms.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
Yochanan
.375 member


Reged: 26/01/03
Posts: 912
Loc: Volksdiktatur Schweden
Re: Ultimate fox medecine…. [Re: NitroX]
      #352066 - 07/04/21 02:24 AM

Joël,

Very nice build. Which floorplate, safety, bolt and bolt handle did you use?

--------------------
© "I have never been able to appreciate 'shock' as applied to killing big game. It seems to me that you cannot kill an elephant weighing six tons by ´shock´unless you advocate the use of a field gun." - W.D.M. Bell: Wanderings of an Elephant Hunter.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Ripp
.577 member


Reged: 19/02/07
Posts: 16072
Loc: Montana, USA
Re: Ultimate fox medecine…. [Re: Yochanan]
      #352067 - 07/04/21 02:37 AM

I actually had one of those.. in same caliber.. and yes, it was excellent fox medicine.. along with most everything else I shot with it, including prairie dogs...Very nice caliber..

And YES, incredible rifle displayed here..

--------------------
ALL MEN DIE, BUT FEW MEN TRULY LIVE..


Post Extras: Print Post   Remind Me!   Notify Moderator  
DORLEAC
.333 member


Reged: 22/01/12
Posts: 465
Loc: Perpignan, France
Re: Ultimate fox medecine…. [Re: Yochanan]
      #352073 - 07/04/21 04:08 AM

Quote:

Which floorplate, safety, bolt and bolt handle did you use?




This is the kind of question which is difficult to answer as there have been so many modifications to the various components.
This is not just an assembly of accessories but a partial construction.
For the side swing safety we use a Recknagel base that we have modified with a new lever, the bolt handle is an in house production and, as far as I remember, the floorplate is a US manufacture that we had to refinish and fully reshape.
The trigger is a Shilen BR, everything else is homemade.
This kind of work is quite fun and changes us from our usual productions which are more complex and more rigorous ... almost a vacation this little .17RM!

DORLEAC
www.dorleac-dorleac.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rule303
.450 member


Reged: 05/07/09
Posts: 5063
Loc: Woodford Qld
Re: Ultimate fox medecine…. [Re: DORLEAC]
      #352079 - 07/04/21 09:46 AM

Quote:

Quote:

Which floorplate, safety, bolt and bolt handle did you use?




This is the kind of question which is difficult to answer as there have been so many modifications to the various components.
This is not just an assembly of accessories but a partial construction.
For the side swing safety we use a Recknagel base that we have modified with a new lever, the bolt handle is an in house production and, as far as I remember, the floorplate is a US manufacture that we had to refinish and fully reshape.
The trigger is a Shilen BR, everything else is homemade.
This kind of work is quite fun and changes us from our usual productions which are more complex and more rigorous ... almost a vacation this little .17RM!

DORLEAC
www.dorleac-dorleac.com




Very nice indeed. Back then Rem barrels where very good for accuracy at least that is what I have found so it is good that one is up to standard. I have never been a fan of the sub calibres but I could easily be persuaded to use the 17Rem if it was that rifle.

Some questions if I may. Is the action still the Rem action, modified?

Is the bolt the Rem bolt, modified?


Post Extras: Print Post   Remind Me!   Notify Moderator  
DORLEAC
.333 member


Reged: 22/01/12
Posts: 465
Loc: Perpignan, France
Re: Ultimate fox medecine…. [Re: Rule303]
      #352096 - 07/04/21 04:31 PM

Quote:

Is the action still the Rem action, modified?

Is the bolt the Rem bolt, modified?




Yes indeed !

DORLEAC
www.dorleac-dorleac.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
Louis
.375 member


Reged: 13/05/15
Posts: 977
Loc: France
Re: Ultimate fox medecine…. [Re: DORLEAC]
      #352180 - 09/04/21 04:48 AM

Sincere congratulations my dear Joël on this new realization “just to satisfy the gunsmith’s hobby”; it is really the true example of how to turn a mass-production rifle into an epitome of classical elegance embellished with a touch of Dorléac & Dorléac! Foxes and other vermin will have to travel low profile from now on in the Pyrénées Orientales if they don’t want to die - albeit in style.
Louis

--------------------
"Everything that doesn't kill me makes me stronger"


Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 4203
Loc: Nth QLD Australia
Re: Ultimate fox medecine…. [Re: Louis]
      #352181 - 09/04/21 06:35 AM

Quote:

Sincere congratulations my dear Joël on this new realization “just to satisfy the gunsmith’s hobby”; it is really the true example of how to turn a mass-production rifle into an epitome of classical elegance embellished with a touch of Dorléac & Dorléac! Foxes and other vermin will have to travel low profile from now on in the Pyrénées Orientales if they don’t want to die - albeit in style.
Louis




I don't think anyone could have put this better!
Mr D you have simply created a masterpiece the the likes of Remington or any other mass produced rifle could emulate, I hope though they take notes & design more so along your style, there will be far better looking rifles out there......but nothing of the quality of workmanship that goes behind such a creation!
I certainly hope you get to take this one out yourself for a hunting trip, any vermin that gets within your sights will definitely go out in style!
Beautiful work as always & yes John you better get your order in soon!


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 34 anonymous users are browsing this forum.

Moderator:   

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 3523

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved