Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: cocking piece peep sight

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

Pages: 1

wombat
.300 member

Reged: 06/03/04
Posts: 163
Loc: Australia

cocking piece peep sight
#35086 - 26/07/05 09:41 AM

does anyone know where one to fit a M98 can be found?

Post Extras:

577Robert
.224 member

Reged: 10/02/05
Posts: 30
Loc: Germany, NRW

Re: cocking piece peep sight [Re: wombat]
#35109 - 26/07/05 07:52 PM

Hello Wombat
look at the following web side:

http://www.golmatic.de/Waffen___Arms/Werkstatt___Workshop/Visierteile___Sight_Parts/visierteile___sight_parts.html

and scroll down to item #WT02201

Robert

Post Extras:

wombat
.300 member

Reged: 06/03/04
Posts: 163
Loc: Australia

Re: cocking piece peep sight [Re: 577Robert]
#35110 - 26/07/05 08:12 PM

Fantastic web site.
I have e-mailed them my request.
Many thanks.

Post Extras:

new_guy
Sponsor

Reged: 10/08/04
Posts: 581
Loc: Texas

Re: cocking piece peep sight [Re: wombat]
#35113 - 26/07/05 11:20 PM

call mark cromwell at www.newenglandcustomgun.com he import from Golmatic and can get you one.

If memory serves, they run about 300euro!

--------------------
www.heymUSA.com

Post Extras:

mickey
.416 member

Reged: 05/01/03
Posts: 4647
Loc: Pend Oreille Valley, Idaho

Re: cocking piece peep sight [Re: wombat]
#35115 - 27/07/05 12:02 AM

Here are a couple that can be had in the $300.00 range

Made by Tom Delucie (sp) of Pasco WA. A H&H copy

.

I think Mark Stratton may be making this at some point. A Rigby copy

--------------------
Lovu Zdar
Mick

A Man of Pleasure, Enterprise, Wit and Spirit Rare Books, Big Game Hunting, English Rifles, Fishing, Explosives, Chauvinism, Insensitivity, Public Drunkenness and Sloth, Champion of Lost and Unpopular Causes.

Post Extras:

atkinson6
.375 member

Reged: 26/01/04
Posts: 678
Loc: Idaho

Re: cocking piece peep sight [Re: mickey]
#35224 - 30/07/05 08:47 AM

I have used them and had 4 or 5 around here for awhile, Personally I didn't like them, they seem to open up the accuracy of a rifle unless you fit the cocking piece then its tight and that bothered me..Most don't really hold a zero well IMO...I gave up on them and started using the Williams ghost peep that is a small affair on top of the rear ring, with nothing protruding off either side...Now if I can just talk someone into making the same in steel...

BTW, I sold all the cocking piece sights I had, so don't ask...

Post Extras:

mickey
.416 member

Reged: 05/01/03
Posts: 4647
Loc: Pend Oreille Valley, Idaho

Re: cocking piece peep sight [Re: atkinson6]
#35240 - 30/07/05 01:57 PM

Ray

What would you use if the rifle was drilled and tapped?

--------------------
Lovu Zdar
Mick

A Man of Pleasure, Enterprise, Wit and Spirit Rare Books, Big Game Hunting, English Rifles, Fishing, Explosives, Chauvinism, Insensitivity, Public Drunkenness and Sloth, Champion of Lost and Unpopular Causes.

Post Extras:

SDH
.224 member

Reged: 06/02/04
Posts: 47
Loc: MT

Re: cocking piece peep sight [Re: atkinson6]
#36097 - 19/08/05 06:46 AM

To realize any consistent accuracy with a cocking piece sight, the sears must be fashioned into closely mated "V" shapes (male-female) to eliminate any play or rotation between the two.
This is more work, and finer work, than most are willing to do.
But nobody uses a CP sight if they really want accuracy.

--------------------
SDH
www.finegunmaking.com

Post Extras:

Pages: 1

Extra information

0 registered and 136 anonymous users are browsing this forum.

Moderator:

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 3050

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact