Home | Ezine | Forums | Links | Contact
NitroExpress.com: Fields Patent front sight

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing

Pages: 1
Tom_H
.333 member


Reged: 13/04/05
Posts: 334
Loc: Southeast, NY
Fields Patent front sight
      #349273 - 15/01/21 01:39 PM

Help.
I have a Fields Patent rifle in (probably) 450#1 coming in for a referb in a few weeks. In an effort to restore the gun I am going to need to fabricate a new front sight.
Honestly, I'm not too sure about what is correct.

Gun appears similar to this one without the stock reinforcement.
https://revivaler.com/holland-holland-fields-patent-falling-block-rifle/


It is a round barrel gun with no rib, and in my searches, I have seen no less than three different possibilities.
The rear sight is a 2 leaf with the first marked 50-150 and the second 200 IIRC.
I did see one on NE but the front sight wasn't clear enough in the pics.

Any help would be appreciated.

Thanks
Tom

--------------------
Carbonation without fermentation is tyranny


Post Extras: Print Post   Remind Me!   Notify Moderator  
Huvius
.416 member


Reged: 04/11/07
Posts: 3517
Loc: Colorado
Re: Fields Patent front sight [Re: Tom_H]
      #349279 - 15/01/21 03:39 PM

My Field 500No.2 has an ovate barrel so may not be the same.
The front sight base is dovetailed into the barrel flat and the sight itself dovetailed into that.
The base may be soldered in place - that would make sense.
I can't be certain that it is original though.

--------------------
He who lives in the past is doomed to enjoy it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26413
Loc: Beautiful British Columbia, Ca...
Re: Fields Patent front sight [Re: Huvius]
      #349296 - 16/01/21 06:12 AM

The front sight base appears to be soldered on the provided link with a narrow (like a #3 Mk. 1 Enfield) dovetailed blade inserted.
But - it is hard to tell for sure.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
Tom_H
.333 member


Reged: 13/04/05
Posts: 334
Loc: Southeast, NY
Re: Fields Patent front sight [Re: DarylS]
      #349328 - 17/01/21 01:12 AM

I found the pic of your rifle Huvius. Very nice.
I don't want to dovetail something that wasn't but that would at least be appropriate.
I also found another post by TH44 but the shot wasn't clear and that may or may not have been dovetailed as well.
At this point that soldered base might get the nod. It does look like the #3 sight so I may take that approach. Easy enough to make at least and correct as well
From what I hear the gun is a mess (there were belt sanders involved) so anything may be an improvement.
Also going to need a new butt plate, but since it's getting restocked it may get a leather covered pad.

Thanks and cheers
Tom

--------------------
Carbonation without fermentation is tyranny

Edited by Tom_H (17/01/21 01:13 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
3DogMike
.400 member


Reged: 29/01/15
Posts: 1404
Loc: Western Slope, Colorado USA
Re: Fields Patent front sight [Re: Tom_H]
      #349345 - 17/01/21 04:46 AM

Hello Tom, following are 3 pictures of the front sight on my August 1872 Alexander Henry single shot. block is soldered onto the barrel.
I think you would be fairly "period correct" with one like this on the Field project.
PM your email if you would like the full resolution pictures.
- Mike







--------------------
"Here's to killing people you don't like with people you do"

"Will Rogers never met a fighter pilot"
- Anon

“Always carry a flask of whiskey in case of snakebite, and furthermore always carry a small snake."
-- W. C. Fields


Post Extras: Print Post   Remind Me!   Notify Moderator  
Tom_H
.333 member


Reged: 13/04/05
Posts: 334
Loc: Southeast, NY
Re: Fields Patent front sight [Re: 3DogMike]
      #349354 - 17/01/21 08:24 AM

Hey Mike. Thanks for the pics.
Now that is interesting.
I was looking at something that would have a similar dovetail to the Field patent with a rib as
they also have the front loading dovetail (anybody know the technical name for that?)

I am going to have to shoot the sights in regardless so the lack of windage adjustment shouldn't be an issue.

Tom

--------------------
Carbonation without fermentation is tyranny


Post Extras: Print Post   Remind Me!   Notify Moderator  
faeroe
.224 member


Reged: 06/04/05
Posts: 14
Loc: Minnesota
Re: Fields Patent front sight [Re: Tom_H]
      #349732 - 27/01/21 08:33 AM

I have a falling block and a pivoting block that I will photograph for you when I get home.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 5 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 1782

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved