Home | Ezine | Forums | Links | Contact
NitroExpress.com: Cocking lever for:

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shopping.NitroExpress.com >> Classifieds & Collecting

Pages: 1
aromakr
.375 member


Reged: 20/04/11
Posts: 849
Loc: Hamilton, Montana
Cocking lever for:
      #345337 - 26/09/20 12:17 AM

Need a cocking lever for a Martini 310 Cadet.

Bob


Post Extras: Print Post   Remind Me!   Notify Moderator  
DoubleD
.400 member


Reged: 23/11/03
Posts: 2386
Loc: Retired in Oklahoma
Re: Cocking lever for: [Re: aromakr]
      #345339 - 26/09/20 01:18 AM

let me look.

What is wrong with the one you have?

--------------------
DD, Ret.


Post Extras: Print Post   Remind Me!   Notify Moderator  
aromakr
.375 member


Reged: 20/04/11
Posts: 849
Loc: Hamilton, Montana
Re: Cocking lever for: [Re: DoubleD]
      #345357 - 27/09/20 12:37 AM

Double D:

Thanks for your response. The cocking leaver appears to be cast steel, and mine has been cut and a fluid steel lever tig welded in place, that has created a weak point and I have a high pressure cartridge on that rifle with very little taper to the case. I occasionally will get a stuck case, when that happens the leaver will bend at the welded point.

Sorry for contacting you this way, but your email did not have you email address.

Bob


Post Extras: Print Post   Remind Me!   Notify Moderator  
DoubleD
.400 member


Reged: 23/11/03
Posts: 2386
Loc: Retired in Oklahoma
Re: Cocking lever for: [Re: aromakr]
      #345453 - 29/09/20 10:34 PM

https://www.gunsinternational.com/guns-f...un_id=101486702


Here is one

--------------------
DD, Ret.


Post Extras: Print Post   Remind Me!   Notify Moderator  
aromakr
.375 member


Reged: 20/04/11
Posts: 849
Loc: Hamilton, Montana
Re: Cocking lever for: [Re: DoubleD]
      #345461 - 30/09/20 04:24 AM

Thank you DoubleD

Bob


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
1 registered and 3 anonymous users are browsing this forum.

Moderator:  NitroX 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 650

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved