Home | Ezine | Forums | Links | Contact
NitroExpress.com: need help with an unknown to me cartridge.

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shopping.NitroExpress.com >> Cartridge Collecting and Swapping

Pages: 1
casper50
.400 member


Reged: 18/10/07
Posts: 1340
Loc: Alaska
need help with an unknown to me cartridge.
      #345147 - 17/09/20 02:28 PM

I recently bought a cape gun. Made in Belgium. Made a sulfur cast of the chamber. The dimensions follow in inches:
length = 1.41 35.8mm
cal = .43
neck of cartridge = .457
base of cartridge = .475
rim diameter = .535
rim thickness = .073

I went through the Manual for cartridge conversions but found nothing really close to the measurements. Any and all help is appreciated.





Post Extras: Print Post   Remind Me!   Notify Moderator  
Huvius
.416 member


Reged: 04/11/07
Posts: 3518
Loc: Colorado
Re: need help with an unknown to me cartridge. [Re: casper50]
      #345155 - 17/09/20 10:40 PM

Seems like it’s between the Austrian 11.15x36R Werndl cartridge and a 450 No.1 Rifle cartridge (sometimes called the 450 Kangaroo Rifle cartridge.


--------------------
He who lives in the past is doomed to enjoy it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
casper50
.400 member


Reged: 18/10/07
Posts: 1340
Loc: Alaska
Re: need help with an unknown to me cartridge. [Re: Huvius]
      #345157 - 18/09/20 01:44 AM

The 450 #1 carbine and the 450 Kangaroo are the closest that I have found. Thank you Huvius for your help.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Huvius
.416 member


Reged: 04/11/07
Posts: 3518
Loc: Colorado
Re: need help with an unknown to me cartridge. [Re: casper50]
      #345164 - 18/09/20 06:03 AM

Look here too:
https://www.oldammo.com/july16.htm

--------------------
He who lives in the past is doomed to enjoy it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
casper50
.400 member


Reged: 18/10/07
Posts: 1340
Loc: Alaska
Re: need help with an unknown to me cartridge. [Re: Huvius]
      #345210 - 20/09/20 10:19 AM

Mauser 1871 11.15x37mmR has been tossed up. I can't find any case dimensions for it. Anyone know them?

Post Extras: Print Post   Remind Me!   Notify Moderator  
TH44
.375 member


Reged: 21/02/09
Posts: 731
Loc: West UK
Re: need help with an unknown to me cartridge. [Re: casper50]
      #345283 - 24/09/20 02:56 AM

Caspar - Only from the Handloaders manual(you have looked?) and Hoyem V 2





I hope this helps

There would be appreciable variation at that time, the more common cartridges were usual in Cape Guns but nothing can be taken for granted

Good luck

TH44


Post Extras: Print Post   Remind Me!   Notify Moderator  
casper50
.400 member


Reged: 18/10/07
Posts: 1340
Loc: Alaska
Re: need help with an unknown to me cartridge. [Re: TH44]
      #345310 - 25/09/20 05:48 AM

That's the only photo or drawing that I've seen. Not the round since it's necked. Mine is straight. Thanks.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 5 anonymous users are browsing this forum.

Moderator:  NitroX 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2149

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved