Home | Ezine | Forums | Links | Contact
NitroExpress.com: Paradox Mould and Regulator

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Paradox and Bore Guns

Pages: 1
SwedenParadox
.224 member


Reged: 02/09/17
Posts: 6
Loc: Sweden
Paradox Mould and Regulator
      #343668 - 26/07/20 03:56 PM

Hello everyone
does anyone have contact information for someone who makes authentic copies of Holland & Holland Paradox Mold and Regulator, I have no tools for my H&H Paradox today and I would rather have tools that are as similar to the originals as possible but can also think of buying tools that are not so similar to the original tools just to get started so I can load some Paradox ammunition, grateful for answers


Post Extras: Print Post   Remind Me!   Notify Moderator  
rigbymauser
.400 member


Reged: 15/05/05
Posts: 1790
Loc: Denmark
Re: Paradox Mould and Regulator [Re: SwedenParadox]
      #343681 - 26/07/20 10:00 PM

How far are you from Helsingborg?... I have a paradox bullet mold made by NEI...but I also have some ready made bullets you might wanna try first.

Post Extras: Print Post   Remind Me!   Notify Moderator  
SwedenParadox
.224 member


Reged: 02/09/17
Posts: 6
Loc: Sweden
Re: Paradox Mould and Regulator [Re: rigbymauser]
      #343686 - 27/07/20 12:14 AM

Okay, I have a 2 hour drive to Helsingborg, what diameter do you get on the bullets? 0.735 0.740? do you want to sell the tool?

Post Extras: Print Post   Remind Me!   Notify Moderator  
rigbymauser
.400 member


Reged: 15/05/05
Posts: 1790
Loc: Denmark
Re: Paradox Mould and Regulator [Re: SwedenParadox]
      #343687 - 27/07/20 12:28 AM

Quote:

Okay, I have a 2 hour drive to Helsingborg, what diameter do you get on the bullets? 0.735 0.740? do you want to sell the tool?




The bullets as I remember weighs 800grain and cast .735"-.736"..

I plan to visit some friends of ours in Helsingborg here i Sept. I could bring you some bullets.

I don`t know yet if I want to sell the mold. Let me think about it. I too plan to get a paradox one day




Edited by rigbymauser (27/07/20 01:00 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
470evans
.333 member


Reged: 30/03/05
Posts: 274
Loc: Texas, USA
Re: Paradox Mould and Regulator [Re: rigbymauser]
      #343741 - 28/07/20 05:46 AM

Sweden Paradox,

I sent you John Millar's contact #, he can make you all the authentic looking tools you want. He can also make you a set of push through sizing dies out of aluminum that will work great but you'll need a press that handles them like the RCBS Ammomaster.



Post Extras: Print Post   Remind Me!   Notify Moderator  
SwedenParadox
.224 member


Reged: 02/09/17
Posts: 6
Loc: Sweden
Re: Paradox Mould and Regulator [Re: 470evans]
      #343743 - 28/07/20 07:05 AM

470evans,

Super thanks


Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.400 member


Reged: 07/12/11
Posts: 2107
Loc: Nth QLD Australia
Re: Paradox Mould and Regulator [Re: rigbymauser]
      #343760 - 28/07/20 10:12 PM

Quote:


The bullets as I remember weighs 800grain and cast .735"-.736"..

I plan to visit some friends of ours in Helsingborg here i Sept. I could bring you some bullets.

I don`t know yet if I want to sell the mold. Let me think about it. I too plan to get a paradox one day




A very nice mold & projectiles there rigbymauser!
I certainly hope you end up with your own Paradox soon enough, fingers crossed!


Post Extras: Print Post   Remind Me!   Notify Moderator  
BigEyeBob
.275 member


Reged: 12/05/16
Posts: 58
Loc: Katherine Northern Territory ...
Re: Paradox Mould and Regulator [Re: 93x64mm]
      #343856 - 30/07/20 05:04 PM

Cast Bullet Engineering in Australia has moulds
for paradox projectiles .

--------------------
I'm not young enough to know every thing .


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 4 anonymous users are browsing this forum.

Moderator:  tinker 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 172

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved