Home | Ezine | Forums | Links | Contact
NitroExpress.com: Mauser Single Square Bridge with factory Engraving

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Forum Photos & Archive

Pages: 1
AlexanderS
.224 member


Reged: 30/05/19
Posts: 10
Loc: Germany
Mauser Single Square Bridge with factory Engraving
      #329135 - 05/06/19 04:20 AM

Hey at all,
found this one in east Germany.
Specials:
Side Safety
Engraving
Magnum Magazin Box
8x57IS

But somebody put some stockengraving on this beauty 🤦🏼‍♂️

Just have a look😊

--------------------
Mauser 4 ever


Post Extras: Print Post   Remind Me!   Notify Moderator  
AlexanderS
.224 member


Reged: 30/05/19
Posts: 10
Loc: Germany
Re: Mauser Single Square Bridge with factory Engraving [Re: AlexanderS]
      #329137 - 05/06/19 04:28 AM

https://ibb.co/Hdnc1s4

--------------------
Mauser 4 ever


Post Extras: Print Post   Remind Me!   Notify Moderator  
AlexanderS
.224 member


Reged: 30/05/19
Posts: 10
Loc: Germany
Re: Mauser Single Square Bridge with factory Engraving [Re: AlexanderS]
      #329138 - 05/06/19 04:30 AM

https://ibb.co/LgP3Rh5

--------------------
Mauser 4 ever


Post Extras: Print Post   Remind Me!   Notify Moderator  
AlexanderS
.224 member


Reged: 30/05/19
Posts: 10
Loc: Germany
Re: Mauser Single Square Bridge with factory Engraving [Re: AlexanderS]
      #329140 - 05/06/19 04:36 AM

https://ibb.co/8Nwdk8j

https://ibb.co/d4S0NWk

https://ibb.co/5nHZgYx

https://ibb.co/TKKDpsV

https://ibb.co/LhyZn5B

https://ibb.co/bLmQgjz

--------------------
Mauser 4 ever


Post Extras: Print Post   Remind Me!   Notify Moderator  
AlexanderS
.224 member


Reged: 30/05/19
Posts: 10
Loc: Germany
Re: Mauser Single Square Bridge with factory Engraving [Re: AlexanderS]
      #329141 - 05/06/19 04:49 AM

If somebody can help me with posting the pictures directly it would be nice.
Thanks and best regards
Alex

--------------------
Mauser 4 ever


Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 3954
Loc: Nth QLD Australia
Re: Mauser Single Square Bridge with factory Engraving [Re: AlexanderS]
      #329142 - 05/06/19 06:00 AM

AlexanderS,
you have a very nice staking rifle from what I've seen so far!
Sorry I can't help with the photos - but here's Rothhammers way below
How to Post Photos to NitroExpress - Revised

Looking for a very simple to use, free hosting site that works on NE?

This photo sharing site works: picr.de . They now require registration, but there is no charge to use their basic service.

I had posted complete (easy, free) instructions previously, they have now changed to an even easier system where you simply 'drag and drop' your images to post.

Here's how:

1) Go to picr.de, translate if necessary (it's in German but is very to use even if you don't sprecken Deutsche).

2) Go to your stored images (with picr.de still open, both displayed on your screen) and 'drag' desired photo to the shaded area on the picr.de screen. Repeat as necessary for additional photos.

3) After picr.de lists the coded filenames of the photos (they will appear as lines of text on picr.de screen), highlight them, press 'control - C'. They are now ready for transfer.

4) Compose your post on NitroExpress, go to and click 'Image'. Delete 'http//' highlighted in box. Press 'Control - V', then the 'OK' box which will transfer images to your post.

Your images will post for all to see.



The image above was posted using picr.de as described.

Here's the link: picr.de





Edited by 93x64mm (05/06/19 06:01 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rothhammer1
.400 member


Reged: 06/01/17
Posts: 1804
Loc: The Redwoods of California
Re: Mauser Single Square Bridge with factory Engraving [Re: AlexanderS]
      #329155 - 05/06/19 08:16 PM

Quote:

If somebody can help me with posting the pictures directly it would be nice.
Thanks and best regards
Alex





Why, Certainly.

These were posted to NE using the method detailed above.

'Easy peasy' , it took but a few minutes:










And for an added extra bonus, from the 1939 Stoeger (US) catalog:












Post Extras: Print Post   Remind Me!   Notify Moderator  
AlexanderS
.224 member


Reged: 30/05/19
Posts: 10
Loc: Germany
Re: Mauser Single Square Bridge with factory Engraving [Re: Rothhammer1]
      #329157 - 05/06/19 10:05 PM

Thanks a lot :-)

--------------------
Mauser 4 ever


Post Extras: Print Post   Remind Me!   Notify Moderator  
justcurious
.333 member


Reged: 17/03/10
Posts: 285
Loc: Germany
Re: Mauser Single Square Bridge with factory Engraving [Re: Rothhammer1]
      #329158 - 05/06/19 10:14 PM

Hi Alex,

A nice find , really factory engraved action.

But a few questions come up.

#1. Where is east Germany ?


#2. What makes you believe itīs a magnum magazine box. The action is standard length single square bridge.A magnum magazine box would not fit.

#3. A picture of the barrel shank could help to classify correctly. Any engraving there ?

#4. What type of barrel and sights ?

Edited by justcurious (05/06/19 10:17 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rothhammer1
.400 member


Reged: 06/01/17
Posts: 1804
Loc: The Redwoods of California
Re: Mauser Single Square Bridge with factory Engraving [Re: justcurious]
      #329165 - 06/06/19 02:39 AM

Quote:



#1. Where is east Germany ?





Ask this guy?



--------------------
Citizen of the Cherokee Nation


Post Extras: Print Post   Remind Me!   Notify Moderator  
AlexanderS
.224 member


Reged: 30/05/19
Posts: 10
Loc: Germany
Re: Mauser Single Square Bridge with factory Engraving [Re: Rothhammer1]
      #329167 - 06/06/19 04:06 AM

#1 It was near Salzwedel
#2 Sorry for that, the magazinbox is higher and whider than the normal one. It loads 6 plus one.
# 3/4 Some Idi... rebarreld the Action in 2000

--------------------
Mauser 4 ever


Post Extras: Print Post   Remind Me!   Notify Moderator  
thirdbite
.224 member


Reged: 30/04/16
Posts: 43
Loc: kansas, USA
Re: Mauser Single Square Bridge with factory Engraving [Re: Rothhammer1]
      #329168 - 06/06/19 04:06 AM

The above catalog shows the side safety and says it locks the firing pin. How does this work? Could a modern side safety such as a Sako be modified to lock the firing pin?

Post Extras: Print Post   Remind Me!   Notify Moderator  
DORLEAC
.333 member


Reged: 22/01/12
Posts: 464
Loc: Perpignan, France
Re: Mauser Single Square Bridge with factory Engraving [Re: thirdbite]
      #329169 - 06/06/19 04:25 AM

Quote:

The above catalog shows the side safety and says it locks the firing pin. How does this work? Could a modern side safety such as a Sako be modified to lock the firing pin?




Go to => http://forums.nitroexpress.com/showflat....true#Post279242

DORLEAC
www.dorleac-dorleac.com

Edited by DORLEAC (06/06/19 04:26 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
AlexanderS
.224 member


Reged: 30/05/19
Posts: 10
Loc: Germany
Re: Mauser Single Square Bridge with factory Engraving [Re: thirdbite]
      #329170 - 06/06/19 04:33 AM

https://ibb.co/2v7k81T

https://ibb.co/ckRmcBm

https://ibb.co/Yk5WfnJ

https://ibb.co/R4gh72x

https://ibb.co/HYtgmMj


Thanks Rothammer😉

--------------------
Mauser 4 ever


Post Extras: Print Post   Remind Me!   Notify Moderator  
justcurious
.333 member


Reged: 17/03/10
Posts: 285
Loc: Germany
Re: Mauser Single Square Bridge with factory Engraving [Re: AlexanderS]
      #329173 - 06/06/19 06:35 AM

The measurement pictures show that the magazine box is made for the 9,3x62 ( 10,75x68)cartridge.
I bet that the 8x57 barrel is not the original to that rifle.Must have been 9,3x62.

Edited by justcurious (06/06/19 07:10 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
2152hq
.300 member


Reged: 20/05/12
Posts: 118
Loc: USA
Re: Mauser Single Square Bridge with factory Engraving [Re: justcurious]
      #329177 - 06/06/19 12:58 PM




Alexander,
You can post your pictures right off of your Imgbb links.

On any of your pics,,,,click on 'Imbedded Codes' on the left hand side of the page.

That will give you a list of pre-printed 'links'.
Go to the 3rd one down...BBCode
Place the cursor/mouse on that pre-printed link and a small box will appear at the end of the link that says 'copy'
....click on that 'copy'
That saves that link for you.

Now you can simply go to your Post and paste that Link in anywhere you want to with the cursor and paste it in by doing Control/V
(hold the Control key down and press V).
It will paste that link into your posting.

Hope this helps.


Post Extras: Print Post   Remind Me!   Notify Moderator  
AlexanderS
.224 member


Reged: 30/05/19
Posts: 10
Loc: Germany
Re: Mauser Single Square Bridge with factory Engraving [Re: 2152hq]
      #329205 - 07/06/19 03:14 PM

Today my Gunsmith put out the barrel to have a look if its a small ring.
And yes it is a real smallring.
In the 30s Mauser did it often when they put in the front base in the receiver ring.

--------------------
Mauser 4 ever


Post Extras: Print Post   Remind Me!   Notify Moderator  
justcurious
.333 member


Reged: 17/03/10
Posts: 285
Loc: Germany
Re: Mauser Single Square Bridge with factory Engraving [Re: AlexanderS]
      #329206 - 07/06/19 04:20 PM

Large ring, but small threaded is what you describe.

Post Extras: Print Post   Remind Me!   Notify Moderator  
AlexanderS
.224 member


Reged: 30/05/19
Posts: 10
Loc: Germany
Re: Mauser Single Square Bridge with factory Engraving [Re: justcurious]
      #329208 - 07/06/19 04:41 PM

Ok thanks

--------------------
Mauser 4 ever


Post Extras: Print Post   Remind Me!   Notify Moderator  
Homer
.416 member


Reged: 07/04/09
Posts: 3081
Loc: Canberra, Australia
Re: Mauser Single Square Bridge with factory Engraving [Re: AlexanderS]
      #329219 - 08/06/19 09:27 AM

Mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm Historical Donut!

Avagreatweekendeh!
Homer

--------------------
"Beware the Lolly Pop of Mediocrity,
Lick it Once and You Will Suck Forever"


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 7 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 4948

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved