Home | Ezine | Forums | Links | Contact
NitroExpress.com: Anyone have instructions or tips on installing H&H mounts?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

Pages: 1
Gundog01
.333 member


Reged: 16/05/15
Posts: 287
Loc: Ohio usa
Anyone have instructions or tips on installing H&H mounts?
      #328192 - 10/05/19 05:17 AM

Gentlemen,

I have a few H&H mounts lying around, I was going to try and put them on a a few of my rifles. I would like to do some in depth reading before I launch this project. I was curious if any of you had any tips or directions on how to do it?

Thank you!


Post Extras: Print Post   Remind Me!   Notify Moderator  
jvw
.275 member


Reged: 15/05/08
Posts: 50
Loc: South Africa
Re: Anyone have instructions or tips on installing H&H mounts? [Re: Gundog01]
      #328218 - 10/05/19 04:11 PM

A gunsmith friend of mine makes H&H mounts for M98's on a regular basis. He's adamant that each and every base should be made and fitted to an individual action as the tolerances vary so much.

You may have to do a bit of fitting to make them fit on random rifles.


Post Extras: Print Post   Remind Me!   Notify Moderator  
DORLEAC
.333 member


Reged: 22/01/12
Posts: 355
Loc: Perpignan, France
Re: Anyone have instructions or tips on installing H&H mounts? [Re: jvw]
      #328232 - 11/05/19 03:44 AM

Each mount is specifically made for an action and a scope.
The adjustment tolerances are close to zero and it is almost impossible to use an assembly initially planned for an action and a scope on a different action and for another scope without a large work of close fitting.
Despite this, the result is rarely satisfactory.
It is the same for claw mounts as, in fact, the H&H mount is a variation.
Courage ... and good luck!

DORLEAC
www.dorleac-dorleac.com

Edited by DORLEAC (11/05/19 10:20 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Gundog01
.333 member


Reged: 16/05/15
Posts: 287
Loc: Ohio usa
Re: Anyone have instructions or tips on installing H&H mounts? [Re: DORLEAC]
      #328233 - 11/05/19 04:03 AM

They are mounts made for/by Rigby that I will be putting on a Rigby, modern mounts, pre war gun. So hopefully itll be close enough. A good amount of hand fitting was originally planned.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 12 anonymous users are browsing this forum.

Moderator:  NitroX 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 206

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved