Home | Ezine | Forums | Links | Contact
NitroExpress.com: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Forum Photos & Archive

Pages: 1 | 2 | >> (show all)
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39066
Loc: Barossa Valley, South Australi...
John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag
      #327324 - 16/04/19 02:55 AM

Gun 9 of 25: We are extremely proud of this .350 Magnum, the first the company has produced since our repatriation to London. This understated beauty has grade 10 deluxe walnut, Rigby half scroll and white gold inlay. Delicately contrasting, the colour hardened magazine box, floor plate, Holland pattern scope mounts, safety, grip cap and recoil bar add some real character to this best London gun. #RIGBY #GUNMAKERS #FITFORPURPOSE


John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag



















--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26414
Loc: Beautiful British Columbia, Ca...
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: NitroX]
      #327332 - 16/04/19 06:36 AM

Beautifully made & presented.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
DORLEAC
.333 member


Reged: 22/01/12
Posts: 464
Loc: Perpignan, France
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: DarylS]
      #327335 - 16/04/19 07:16 AM


This .350 Magnum would have been much more beautiful without this pancake cheekpiece...but maybe it's to balance the big Swarovski scope (!)

DORLEAC
www.dorleac-dorleac.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
xausa
.400 member


Reged: 07/03/07
Posts: 2037
Loc: Tennessee, USA
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: DORLEAC]
      #327338 - 16/04/19 08:56 AM

I prefer my original Rigby .350 Rigby Magnum with a single square bridge, stepped receiver ring, slant magazine box action and a cocking piece sight. I'm not afraid to take it out in the field hunting.



Post Extras: Print Post   Remind Me!   Notify Moderator  
m4220
.300 member


Reged: 04/02/07
Posts: 233
Loc: wa
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: xausa]
      #327340 - 16/04/19 10:29 AM

XAUSA, With mention of the slant magazine box does your rifle use the Rimmed Rigby 350#2 cartridge or the rimless Rigby 350 magnum cartridge?
M4220


Post Extras: Print Post   Remind Me!   Notify Moderator  
xausa
.400 member


Reged: 07/03/07
Posts: 2037
Loc: Tennessee, USA
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: m4220]
      #327345 - 16/04/19 01:04 PM

It's the rimless variety. As I understand it, originally all the magnum length actions from Mauser came with the slant magazines, but not all had the bolt face for the rimmed .400/.350 or .350 #2 cartridges. Later actions came without the stepped receiver ring and the slant magazine.

Post Extras: Print Post   Remind Me!   Notify Moderator  
m4220
.300 member


Reged: 04/02/07
Posts: 233
Loc: wa
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: xausa]
      #327349 - 16/04/19 03:21 PM

That is a Fantastic looking rifle!! Enjoy!

Post Extras: Print Post   Remind Me!   Notify Moderator  
DORLEAC
.333 member


Reged: 22/01/12
Posts: 464
Loc: Perpignan, France
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: xausa]
      #327351 - 16/04/19 04:09 PM

Quote:

It's the rimless variety. As I understand it, originally all the magnum length actions from Mauser came with the slant magazines, but not all had the bolt face for the rimmed .400/.350 or .350 #2 cartridges. Later actions came without the stepped receiver ring and the slant magazine.




I think you are wrong.
Only the magnum Mauser action for the rimmed .350 came with slanted magazine, all other Mauser actions for .350 Rigby Magnum rimless and for such cartridges as the .404 Jeffery or .280 Ross are fitted with standard deep magazine (not slanted).
I have at the rack original .350 Rigby and 404 Jeffery rifles, all built at Oberndorf in the thirties and to have made many big game rifles on Original Mauser magnum action the only ones we have ever encountered with slanted magazine were for .350 magnum rimmed round.

DORLEAC
www.dorleac-dorleac.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
xausa
.400 member


Reged: 07/03/07
Posts: 2037
Loc: Tennessee, USA
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: DORLEAC]
      #327357 - 16/04/19 08:31 PM

I think the important factor is "built by Oberndorf in the thirties". All of the stepped receiver ring, slant magazine magnum Mauser actions I have seen (and I have owned several) are pre World War I, as is the one on my rifle. In my opinion, Oberndorf magnum actions as we know them (and I own several of them also) appeared after World War I.

Rimless cartridges work with slant magazines. The usual conversion by Rigby of pre-War .400/.350's and .350 Magnums was a rebore and rechambering job to .375 H&H. Rimmed cartridges can also be made to work with straight magazines, as the P14 Enfield demonstrated. Mauser evidently saw the rimless belted cartridge as the wave of the future and acted accordingly.


Post Extras: Print Post   Remind Me!   Notify Moderator  
DORLEAC
.333 member


Reged: 22/01/12
Posts: 464
Loc: Perpignan, France
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: xausa]
      #327359 - 16/04/19 09:31 PM


Sorry xausa, I maintain what I wrote.
To have examined several magnum systems manufactured before 1912, only versions for rimmed cartridges [400/.350 Rigby] have a slanted magazine.
The first magnum actions were made with stepped receiver front ring but the majority had a standard deep straight magazine.
You'll find such rifles pictured in Jon Speed's two remarkable books.
Of course, this does not detract from the elegance of your beautiful rifle.

DORLEAC
www.dorleac-dorleac.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
xausa
.400 member


Reged: 07/03/07
Posts: 2037
Loc: Tennessee, USA
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: DORLEAC]
      #327366 - 17/04/19 01:30 AM

I consulted Jon Speed directly.

Jon,

I’m having a friendly argument with Dorleac on NE concerning whether Rigby ever used slant box actions to build .350 Magnum caliber rifles. I advance the opinion that all stepped ring magnum length actions had slant magazines, which he disputes.

There is a rifle currently up for auction on Proxibid which is ostensibly caliber .350 Magnum and so marked on the receiver ring, but appears to me to have a slant magazine. https://www.proxibid.com/Oberndorf-Rigby-Mauser-Bolt-Action-Sporting-Rifle/lotInformation/47410040
Can you settle this disagreement?

Thanks,
Bill

This was his reply:

"Bill. I agree that all Rigby magnum 400/350 magnums had step down rings and slant box magazines. However, its possible that when assembling the later Rimless .350 magnum they may have used up an inventory slant box unit that can be made to handle the rimless .350 etc. So No this was not Original to the Normal Ring .350 Rimless magnum rifle. Dumb events like this occur every so often and confuse folks. Regards, Jon"


Post Extras: Print Post   Remind Me!   Notify Moderator  
justcurious
.333 member


Reged: 17/03/10
Posts: 285
Loc: Germany
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: xausa]
      #327367 - 17/04/19 03:53 AM

Exceptions confirm the rule.

Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26414
Loc: Beautiful British Columbia, Ca...
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: xausa]
      #327368 - 17/04/19 03:58 AM

Quote:

I prefer my original Rigby .350 Rigby Magnum with a single square bridge, stepped receiver ring, slant magazine box action and a cocking piece sight. I'm not afraid to take it out in the field hunting.






That is sweet - says, take me out hunting, NOW!

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
DORLEAC
.333 member


Reged: 22/01/12
Posts: 464
Loc: Perpignan, France
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: xausa]
      #327371 - 17/04/19 04:32 AM

Quote:

"Bill. I agree that all Rigby magnum 400/350 magnums had step down rings and slant box magazines. However, its possible that when assembling the later Rimless .350 magnum they may have used up an inventory slant box unit that can be made to handle the rimless .350 etc. So No this was not Original to the Normal Ring .350 Rimless magnum rifle. Dumb events like this occur every so often and confuse folks. Regards, Jon"




Xausa, thank you for your kind response and your fair play.
As Jon SPEED makes it clear, in special circumstances RIGBY may have been forced to use slanted magazine box for their .350 Magnum Rimless, but if that happened, it's an exception to the usual rule of using standard magnum magazines.
I think that such conversions occurred when it was necessary for them to adapt old stocks to the new rimless cartridge and again, the exception confirms the rule !

All the best.

DORLEAC
www.dorleac-dorleac.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
m4220
.300 member


Reged: 04/02/07
Posts: 233
Loc: wa
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: DORLEAC]
      #327373 - 17/04/19 05:10 AM

Wow! Amazing how a simple question can open the can of worms on the Continental gun trade of the times. Jon, Joel, Bill are all well versed & have come up with a probability to clear the murky waters! My H. Scherping 350 Rigby #2 Double rifle raises it's own questions.

Thanks
m4220


Post Extras: Print Post   Remind Me!   Notify Moderator  
xausa
.400 member


Reged: 07/03/07
Posts: 2037
Loc: Tennessee, USA
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: m4220]
      #327375 - 17/04/19 06:52 AM

I once had a Lancaster 400/350 Rigby O/U double rifle (made in Belgium). This was in the early 70's and there were no 300 grain .35 caliber bullets available, so I reluctantly let it and a Rigby 400/350 Mauser slant box, step receiver ring, single square bridge bolt gun go.

I once took the Lancaster for a walk, to see if there was anything on my farm to shoot. Much to my surprise, what I encountered was a ground hog, which for some reason had decided to climb a tree when he felt threatened. Big mistake. He was the only victim of the DR while in my possession.

A few years back, I had an opportunity to buy the Rigby rifle back and did. It had in the mean time been converted to a .375 H&H Magnum and I sent it to Lon Paul for restoration to the original caliber. Alas, it was in Lon's safe when his shop fell victim to a California wild fire. The original Rigby stock which I had located for the project also perished in the conflagration.



Post Extras: Print Post   Remind Me!   Notify Moderator  
m4220
.300 member


Reged: 04/02/07
Posts: 233
Loc: wa
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: xausa]
      #327376 - 17/04/19 07:17 AM

OOH, that burnt safe is hard to look at!


http://forums.nitroexpress.com/showflat....true#Post261379

I posted pic's of an original box of Rigby 350 Magnum cartridges awhile back that I have stashed in my ammo collection.

m4220

Edited by m4220 (17/04/19 07:26 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39066
Loc: Barossa Valley, South Australi...
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: m4220]
      #327393 - 17/04/19 06:43 PM

I was urging Rigby to bring out the .275 and .350's again a few years ago.

And with the Highland Stalker model they well and truly have.

It is great to see the .350 Rigby Magnum again being made in a factory rifle.

the rifles displayed are special custom london Best shop models. A plainer working rifle is available more "off the shelf".

I couldn't afford any of these spectacular rifles either. These series of 25 rifles are designed to highlight some of the special rifles made recently.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
PatagonHunter
.300 member


Reged: 20/01/06
Posts: 249
Loc: Bariloche, Patagonia Argentina
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: NitroX]
      #327395 - 17/04/19 11:41 PM

Hello,

Fascinating post!! I have a question: what would be the reason for that stepped receiver ring?

Thank you!

PH


Post Extras: Print Post   Remind Me!   Notify Moderator  
Huvius
.416 member


Reged: 04/11/07
Posts: 3518
Loc: Colorado
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: PatagonHunter]
      #327409 - 18/04/19 02:08 PM

From what I've observed, a few slant box 400/350s were rechambered to the later 350 Magnum without altering the bolt face as there is only about .005" between them. I suppose replacing the extractor would have been part of a proper conversion though.
That would explain the odd step ring/slant box 350 Rimless Magnum one occasionally sees.

The 350 here:
https://www.proxibid.com/Oberndorf-Rigby-Mauser-Bolt-Action-Sporting-Rifle/lotInformation/47410040
to my eye, doesn't appear to be a slant box 350.
The only way I am able to tell them apart by side view photos is to look for the far forward edge of the floor plate.
The auction rifle has the forward edge pretty much straight down from the rear side of the receiver ring - as one would expect from a straight down magazine whereas XAUSA's Rigby has the forward edge well behind a vertical line drawn from the rear edge of the receiver ring - magazine slanting rearward from the action bottom.
As heartbreaking as the fire picture is, it is a very good visual of a slant box magnum Mauser barreled action.





--------------------
He who lives in the past is doomed to enjoy it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
PatagonHunter
.300 member


Reged: 20/01/06
Posts: 249
Loc: Bariloche, Patagonia Argentina
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: Huvius]
      #327421 - 18/04/19 09:03 PM

Hello Huvius,

Good pictures! As I see, the slant magazine box has no relation with the stepped ring. They are totally independent things...

PH


Post Extras: Print Post   Remind Me!   Notify Moderator  
JDL
.300 member


Reged: 25/12/10
Posts: 247
Loc: Louisiana
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: PatagonHunter]
      #327426 - 19/04/19 12:00 AM

Quote:

Hello,

Fascinating post!! I have a question: what would be the reason for that stepped receiver ring?

Thank you!

PH




That question crossed my mind also PH.


Post Extras: Print Post   Remind Me!   Notify Moderator  
justcurious
.333 member


Reged: 17/03/10
Posts: 285
Loc: Germany
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: JDL]
      #327428 - 19/04/19 01:12 AM

BTW the stepped receivers were small threaded (96 ).

Post Extras: Print Post   Remind Me!   Notify Moderator  
Huvius
.416 member


Reged: 04/11/07
Posts: 3518
Loc: Colorado
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: justcurious]
      #327433 - 19/04/19 04:10 AM

I had not even thought about the thread size!
Makes sense that the non-step action was standardized for the 416 and 350 Magnum and presumably used from that point on for new builds.

--------------------
He who lives in the past is doomed to enjoy it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39066
Loc: Barossa Valley, South Australi...
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: Huvius]
      #327459 - 19/04/19 04:16 PM

Quote:

I had not even thought about the thread size!
Makes sense that the non-step action was standardized for the 416 and 350 Magnum and presumably used from that point on for new builds.




Don't know as a fact, but if you are referring to the current Rigby builds, I doubt any Highland Stalker based rifles use the same action as the "Big Game model" .416 rifles. The Highlamd Stalker rifles are designed as "medium action" rifles not big game rifles. Specific action sizes? Don't know.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
DORLEAC
.333 member


Reged: 22/01/12
Posts: 464
Loc: Perpignan, France
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: NitroX]
      #327464 - 19/04/19 09:03 PM


Hi John,

Highlamd Stalker rifles are built on standard length modern made 98' type action.
Only original pre-war .275 HV Rigby used intermediate [medium] already 7x57 barreled Oberndorf made actions.

DORLEAC
wwww.dorleac-dorleac.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
Huvius
.416 member


Reged: 04/11/07
Posts: 3518
Loc: Colorado
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: NitroX]
      #327470 - 20/04/19 12:01 AM

Quote:

Quote:

I had not even thought about the thread size!
Makes sense that the non-step action was standardized for the 416 and 350 Magnum and presumably used from that point on for new builds.




Don't know as a fact, but if you are referring to the current Rigby builds, I doubt any Highland Stalker based rifles use the same action as the "Big Game model" .416 rifles. The Highlamd Stalker rifles are designed as "medium action" rifles not big game rifles. Specific action sizes? Don't know.




I was referring to the run of pre war Rigby 416s and 350s.
The new 350 looks to be on a standard length action.
There is certainly good reason to use a magnum length action for the 416, although as we know Rigby also built the occasional 416 on a standard action, but the 350 doesn't really need to be a magnum length any more than a 333 or 404 Jeffery do.
Of course, once available, Jeffery used magnum '98 actions for those too, so maybe it was a cache' deal - making sporting rifles on actions that were never meant to be for military use.

--------------------
He who lives in the past is doomed to enjoy it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
kuduae
.400 member


Reged: 13/01/10
Posts: 1756
Loc: middle of Germany
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: Huvius]
      #327472 - 20/04/19 01:23 AM

Going by the position of the recoil lug reinforcement, that John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag is built on a modern Magnum length action, just like their Big Game rifles. Not a "Highland Stalker" standard length action. According to Jon Speed, it is quite easy to identify standard or magnum length actions, if there is a recoil crossbolt in the stock: As action screw distance is the same on intermediate, standard and magnum length actions, the recoil lug is more to the rear on magnum length actions. So on standard length actions a recoil crossbolt is about centered under the receiver ring, while on magnum length actions it is closer to the rear end, like on this .350 Magnum rifle.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Huvius
.416 member


Reged: 04/11/07
Posts: 3518
Loc: Colorado
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: kuduae]
      #327485 - 20/04/19 02:56 AM

Quote:

Going by the position of the recoil lug reinforcement, that John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag is built on a modern Magnum length action, just like their Big Game rifles. Not a "Highland Stalker" standard length action. According to Jon Speed, it is quite easy to identify standard or magnum length actions, if there is a recoil crossbolt in the stock: As action screw distance is the same on intermediate, standard and magnum length actions, the recoil lug is more to the rear on magnum length actions. So on standard length actions a recoil crossbolt is about centered under the receiver ring, while on magnum length actions it is closer to the rear end, like on this .350 Magnum rifle.




You are absolutely correct!
In fact, I was just looking at a rifle online this AM that also looks to be a Magnum action and I was trying to remember how the front lug / crossbolt relation is a great clue.
Good to see that Rigby is staying true to the original 350 Magnum configuration.

--------------------
He who lives in the past is doomed to enjoy it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39066
Loc: Barossa Valley, South Australi...
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: kuduae]
      #327511 - 20/04/19 06:23 PM

Quote:

Going by the position of the recoil lug reinforcement, that John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag is built on a modern Magnum length action, just like their Big Game rifles. Not a "Highland Stalker" standard length action. According to Jon Speed, it is quite easy to identify standard or magnum length actions, if there is a recoil crossbolt in the stock: As action screw distance is the same on intermediate, standard and magnum length actions, the recoil lug is more to the rear on magnum length actions. So on standard length actions a recoil crossbolt is about centered under the receiver ring, while on magnum length actions it is closer to the rear end, like on this .350 Magnum rifle.




Good observation. Thanks for the information.

So does the mength of the .350 Rigby Magnum justify a magnum length action? Even if capable of using a standard length action? If so, I could imagine most London Best custom users choosing the magnum length action as a definite choice.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
Huvius
.416 member


Reged: 04/11/07
Posts: 3518
Loc: Colorado
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: NitroX]
      #327520 - 21/04/19 12:31 AM

I don't think the cartridge requires the use of a magnum length action but it is on the long end of the standard action capability.
Seems like any action set up for the 300 or 375H&H would be a close to ready to go although the H&H case has a rim .005" bigger so the bolt face would be a tad oversized.

Some cartridge overall lengths for comparison:
350 Magnum - 3.60"
400/350 - 3.60"
375 H&H - 3.60"
333 Jeff. - 3.48"
318 W.R. - 3.40"
The 416 Rigby is 3.72"

--------------------
He who lives in the past is doomed to enjoy it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
kuduae
.400 member


Reged: 13/01/10
Posts: 1756
Loc: middle of Germany
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: Huvius]
      #327521 - 21/04/19 01:42 AM

Look at Jon Speed's "Mauser – Original Oberndorf Sporting Rifles", page 127, table 222. It's a list of the magazine box dimensions the pre-war Mauser factory used. The box lengths used for various chamberings:
69 mm = 2.76" for 6.5x54 Mauser K, 8x51, .250-3000 Savage (K action)
79 mm = 3.11" for 7x57 (intermediate action)
84 mm = 3.31" for 8x60, 9x57, 10.75x68 (standard length action)
85 mm = 3.35" for 9.3x62
88 mm = 3.46" for 7x64 and .30-06
92 mm = 3.62" for .318, .333, .404, 9.3x64 (some standard length, most often magnum actions)
All longer magazines used magnum length actions then:
95 mm = 3.74" for .350 Rigby, .375 H&H, 8x75, 8x68
96 mm = 3.78" for .280 Ross
97.5 mm = 3.84" for .416 Rigby.
Mauser frowned upon the practice of opening up standard length actions to take longer cartridges like the .375 H&H. This became common practice after WW2 only when magnum length actions were not available any more. Even the FN "Magnum" actions are merely opened up standard length ones. RWS and Brenneke went another way. When they resumed production of their 8x68S and 9.3x64 cartridges in the 1950s, they seated bullets deeper to keep cartridge oals at 87 and 85.6 mm and thus fitted them to standard length actions and magazines.


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26414
Loc: Beautiful British Columbia, Ca...
Re: John Rigby 9 of 25 Mauser 98 in .350 Rigby Mag [Re: kuduae]
      #327523 - 21/04/19 03:07 AM

Wikipedia gives the OAL of the .350 magnum as 3.44"
"Overall length 3.44 in (87 mm)"

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1 | 2 | >> (show all)



Extra information
0 registered and 15 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 10337

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved