Home | Ezine | Forums | Links | Contact
NitroExpress.com: Kahles Mignon 4x

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> 'Classic' Firearms Photos & Archive

Pages: 1
Hubert
.224 member


Reged: 15/03/05
Posts: 37
Loc: Tasmania , Australia
Kahles Mignon 4x
      #322025 - 30/11/18 03:53 PM

I have a Kahles Mignon 4x which has an eyepiece which is fixed , unlike another I have which can be removed .
I am looking to replace/ change the soldered upper mounts which requires disassembly of the scope to melt the soft soldered half rings .
Question : how is the Mignon dismantled .
I have disassembled the 2 1/2 power 22mm German scopes but the mignon seems a bit more complex .
Any help would be appreciated .


Post Extras: Print Post   Remind Me!   Notify Moderator  
Waidmannsheil
.400 member


Reged: 19/04/13
Posts: 2446
Loc: Melbourne Australia
Re: Kahles Mignon 4x [Re: Hubert]
      #322112 - 02/12/18 10:06 PM

Give this company a try:

https://opticalrepairs.com.au/


Matt.

--------------------
There is nothing wrong with vegetarian food, so long as there is meat with it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Hubert
.224 member


Reged: 15/03/05
Posts: 37
Loc: Tasmania , Australia
Re: Kahles Mignon 4x [Re: Waidmannsheil]
      #322139 - 03/12/18 07:25 PM

Thanks for that . The reference you supplied might turn out to be useful in the future .
Actually i think I shall be alright with this work .
I have taken off the eyepiece and can now see that the focusing ring is held in place by the inner housing of the erector lens itself rather than a simple nut as with Hensoldt and Zeiss .
Dunlap explains all this in his book GUNSMITHING but rather superficially .
I intend to proceed as with my experience with the German scopes and hope that Kahles copied them .i.e. after removing the focusing ring I shall remove the adjusting turret and see if it is much the same as the Hensoldts.
I hope that the graticule cell can be pushed out of the tube without damage as the Hensoldts permit .
I shall report on my progress or misadventure at a later date.
Thanks again .


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 66 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2548

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved