Home | Ezine | Forums | Links | Contact
NitroExpress.com: Making a DR from scratch - What's involved???

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
dok
.275 member


Reged: 21/04/05
Posts: 87
Loc: NT, Australia
Making a DR from scratch - What's involved???
      #31912 - 24/05/05 08:28 PM

I've read a few posts where it appears people have purchased shotguns and then built DR up from the action.

Can someone tell me (Briefly - i guess) what is involved in picking a suitable shotgun and building it up to a double in .416 rigby or .470.

Who is a ggod gunsmith in Australia that specialises in this work...

cheers

--------------------
DOK

Post Extras: Print Post   Remind Me!   Notify Moderator  
500grains
.416 member


Reged: 16/02/04
Posts: 4732
Loc: Salt Lake City, Utah USA
Re: Making a DR from scratch - What's involved??? [Re: dok]
      #31923 - 24/05/05 11:47 PM

This website tells all the steps of making a best quality sidelock double: http://www.londongunmakers.com/

It takes about 800 hours of labor.

Post Extras: Print Post   Remind Me!   Notify Moderator  
doublegunfan
.275 member


Reged: 26/04/05
Posts: 60
Loc: Brazil
Re: Making a DR from scratch - What's involved??? [Re: dok]
      #31933 - 25/05/05 01:46 AM

I think that anyone interested on hte matter of double rifle making should read Ellis W. Brown's "Building Rifles on Shotgun Actions". It has detailed explanation on the selection criteria for the actions, sleeving, regulation process and calibre selection, too. I greatly recommend that you read it. Most of your questions will be answered.

Fred

Post Extras: Print Post   Remind Me!   Notify Moderator  
Marrakai
.416 member


Reged: 09/01/03
Posts: 3592
Loc: Darwin, Top End of Australia
Re: Making a DR from scratch - What's involved??? [Re: doublegunfan]
      #31957 - 25/05/05 12:34 PM

Dok:
To my knowledge, the only gunsmith in Australia who has made SxS double-rifles from shotguns on anything like a regular basis is Rolph Bachnick, I think his Melbourne shingle says 'Safari Arms'. Dunno whether he will still do this though. I have one of his efforts, a .577 Light Nitro double on a Greener Empire action. I have posted the story of that gun before: newbies can read it here.

Ron Webb made a couple of U/Os on the Ruger Red Label action years ago, chambered in .375 Flanged Magnum. I'm told they were good, but I believe Ron is long retired.

Ellis Brown favours German shotguns with a cross-bolt third fastener, however my advice fwiw would be to forget the .416 Rigby and the .470 Nitro, they are fat cartridges and wouldn't leave much meat around the chamber. Back-thrust on the standing breech can be quite high with full-nitro loads in fat cartridges. Slimmer cartridges or lower pressure options should be selected IMO, despite Ellis Brown's enthusiasm!

Remember, you are dealing with shotgun actions proved for service pressures in the 3 to 5 ton range, and proposing to fit them up for 14 to 18-ton loads!!!
While the pressure calculations are much more complicated than that, of course, I hope it still offers some sobriety to your proposal!

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au

Post Extras: Print Post   Remind Me!   Notify Moderator  
davem3
.300 member


Reged: 10/02/04
Posts: 121
Loc: birmingham,al usa
Re: Making a DR from scratch - What's involved??? [Re: dok]
      #31965 - 25/05/05 01:28 PM

The "African Hunter" site has an excellent 3 part article written by a machinist who built his own 4 Bore double and then went on safari with the gun.
I think it is titled "Rebirth of the 4 Bore". Dave

Post Extras: Print Post   Remind Me!   Notify Moderator  
dok
.275 member


Reged: 21/04/05
Posts: 87
Loc: NT, Australia
Re: Making a DR from scratch - What's involved??? [Re: davem3]
      #31983 - 25/05/05 07:25 PM

Thanks for the feed back. There's some interesting reading to be done...

cheers


--------------------
DOK

Post Extras: Print Post   Remind Me!   Notify Moderator  
DUGABOY1
.400 member


Reged: 02/02/03
Posts: 1340
Loc: TEXAS USA
Re: Making a DR from scratch - What's involved??? [Re: dok]
      #32013 - 26/05/05 03:57 AM

"MAKEING A DOUBLE RIFLE FROM SCRATCH-WHAT'S INVOLVED???"

Not much! You simply gather some steel, and wood, and cut away everything that ISN'T a double rifle, and there you have it!

--------------------
..........Mac >>>===(x)===>
DUGABOY1, and MacD37 founding member of DRSS www.doublerifleshooterssociety.com
"If I die today, I have had a life well spent, for I've been to see the Elephant, and smelled the smoke of Africa!"

Post Extras: Print Post   Remind Me!   Notify Moderator  
Metswedi
.300 member


Reged: 20/01/05
Posts: 156
Loc: Yorks. England
Re: Making a DR from scratch - What's involved??? [Re: DUGABOY1]
      #32026 - 26/05/05 06:17 AM

That's GROSSLY over simplyfying it dugaboy, you need a piece of ivory or enamel for the foresight, Who were you apprenticed to??????

--------------------
Perfer et obdura!

Post Extras: Print Post   Remind Me!   Notify Moderator  
400NitroExpress
.400 member


Reged: 26/11/03
Posts: 1154
Loc: Lone Star State
Re: Making a DR from scratch - What's involved??? [Re: DUGABOY1]
      #32030 - 26/05/05 07:20 AM

You're back in form Mac!
----------------------------------------

--------------------
"Serious rifles have two barrels, everything else just burns gunpowder."

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
0 registered and 107 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 1580

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved