Home | Ezine | Forums | Links | Contact
NitroExpress.com: Brno 22-F

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Forum Photos & Archive

Pages: 1
rpeck



Reged: 06/12/13
Posts: 435
Loc: Canada
Brno 22-F
      #318580 - 30/07/18 09:55 AM

Brno 22-F Fullstock 8x57S w/ Holts Wetzlar 6x scope and DST
Dated 1951




Edited by rpeck (30/07/18 07:44 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26414
Loc: Beautiful British Columbia, Ca...
Re: Brno ZG-47 Fullstock [Re: rpeck]
      #318581 - 30/07/18 10:03 AM

NICE = & that rifle obviously has not been a safe queen.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
Ripp
.577 member


Reged: 19/02/07
Posts: 16072
Loc: Montana, USA
Re: Brno ZG-47 Fullstock [Re: DarylS]
      #318584 - 30/07/18 10:09 AM

Quote:

NICE = & that rifle obviously has not been a safe queen.






Ripp

--------------------
ALL MEN DIE, BUT FEW MEN TRULY LIVE..


Post Extras: Print Post   Remind Me!   Notify Moderator  
Homer
.416 member


Reged: 07/04/09
Posts: 3081
Loc: Canberra, Australia
Re: Brno ZG-47 Fullstock [Re: Ripp]
      #318588 - 30/07/18 10:56 AM

+1 and Mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm Donuts!

Am I wrong, or does this ZG-47, have a different bolt shroud/safety arrangment, from usual?

D'oh!
Homer

--------------------
"Beware the Lolly Pop of Mediocrity,
Lick it Once and You Will Suck Forever"


Post Extras: Print Post   Remind Me!   Notify Moderator  
xausa
.400 member


Reged: 07/03/07
Posts: 2037
Loc: Tennessee, USA
Re: Brno ZG-47 Fullstock [Re: Homer]
      #318591 - 30/07/18 12:05 PM

Quote:

Am I wrong, or does this ZG-47, have a different bolt shroud/safety arrangment, from usual?
Homer




You ain't wrong. It ain't a ZG-47, it's a BRNO 21/22F, depending on who you believe about the numbering system. The ZG47 has a different bolt handle, a different bolt shroud and safety and a large receiver ring. It is also marked ZG47 on the receiver ring.


Post Extras: Print Post   Remind Me!   Notify Moderator  
paradox_
.375 member


Reged: 12/05/07
Posts: 645
Loc: Australia
Re: Brno ZG-47 Fullstock [Re: xausa]
      #318601 - 30/07/18 03:49 PM

Correct, its NOT a ZG47......sorry

--------------------
Walk softly and carry a big stick


Post Extras: Print Post   Remind Me!   Notify Moderator  
Louis
.375 member


Reged: 13/05/15
Posts: 977
Loc: France
Re: Brno ZG-47 Fullstock [Re: paradox_]
      #318606 - 30/07/18 04:47 PM

Very nice rifle - whatever model it is, in an excellent caliber. Good luck on hunting with it as there is obviously space left for more nails on the stock!
Louis

--------------------
"Everything that doesn't kill me makes me stronger"


Post Extras: Print Post   Remind Me!   Notify Moderator  
rpeck



Reged: 06/12/13
Posts: 435
Loc: Canada
Re: Brno ZG-47 Fullstock [Re: Louis]
      #318625 - 31/07/18 01:06 AM

Always hunt with a lucky rifle.

Decades ago I had a Ruger 77 30-06 that was unexpectedly very accurate, yet whenever I took it hunting....nothing happened.
So I sold it, and upon its replacement the deer, moose and bears started showing up and I started knocking them down.

Seriously, I believe there is a psychological benefit (that can help lead to hunting success) by hunting with what one believes to be a "lucky gun."

On the other hand, anyone can drive a nail into a piece of wood, and it isn't only fishermen who are prone to a bit of exaggeration.

Edited by rpeck (31/07/18 01:21 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
rpeck



Reged: 06/12/13
Posts: 435
Loc: Canada
Re: Brno ZG-47 Fullstock [Re: rpeck]
      #318737 - 03/08/18 07:36 AM

BRNO Model 21F, small ring Mauser 98. Caliber 8x57S
Barrel Length: 20.5" to front of bolt. Double set triggers.
Holts Wetzlar 6x scope. German No. 1 reticle.
Factory fitted see-through claw mounts.
Dated 1951 on barrel and receiver.
Matching serial numbers on barrel, bolt and stock (in barrel channel).
Czechoslovakian and German (Ulm) proofmarks.
Right side of barrel ahead of rear sight marked in English "Made in Czechoslovakia".
Receiver and barrel stamped "Geco" (German retailer, Gustav Genschow & Co.)

Stock stamped WB (Initials of an inspector?) in a cartouche on bottom of stock behind the pistol grip.
Tally marked stock (silver inlays of Roe Deer, Wild Boar, Red Deer, and Fox...brass pins)
Weight approx. 6lb. 10 oz. w/o scope.









Edited by rpeck (03/08/18 07:43 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
tinker
.416 member


Reged: 12/03/05
Posts: 4835
Loc: Nevada
Re: Brno ZG-47 Fullstock [Re: rpeck]
      #318738 - 03/08/18 02:14 PM

Wow nice!

--------------------
--Self-Appointed Colonel, DRSS--



"It IS a dangerous game, and so named for a reason, and you can't play from the keyboard. " --Some Old Texan...


Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 3954
Loc: Nth QLD Australia
Re: Brno ZG-47 Fullstock [Re: xausa]
      #318747 - 03/08/18 05:37 PM

Quote:

Quote:

Am I wrong, or does this ZG-47, have a different bolt shroud/safety arrangment, from usual?
Homer




You ain't wrong. It ain't a ZG-47, it's a BRNO 21/22F, depending on who you believe about the numbering system. The ZG47 has a different bolt handle, a different bolt shroud and safety and a large receiver ring. It is also marked ZG47 on the receiver ring.




Very unusual safety, never seen one of these; great positioning - just beside your thumb as you hold the rifle!
Is it down for safe?


Post Extras: Print Post   Remind Me!   Notify Moderator  
Homer
.416 member


Reged: 07/04/09
Posts: 3081
Loc: Canberra, Australia
Re: Brno ZG-47 Fullstock [Re: 93x64mm]
      #318748 - 03/08/18 06:19 PM

Mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm more Donuts!

Avagreatweekendeh!
Homer

--------------------
"Beware the Lolly Pop of Mediocrity,
Lick it Once and You Will Suck Forever"


Post Extras: Print Post   Remind Me!   Notify Moderator  
justcurious
.333 member


Reged: 17/03/10
Posts: 285
Loc: Germany
Re: Brno ZG-47 Fullstock [Re: Homer]
      #318755 - 03/08/18 10:19 PM

Definitely not factory fitted scope mount.

Post Extras: Print Post   Remind Me!   Notify Moderator  
rpeck



Reged: 06/12/13
Posts: 435
Loc: Canada
Re: Brno ZG-47 Fullstock [Re: justcurious]
      #318758 - 03/08/18 11:11 PM

Why "definitely"? Because they are claw mounts?
I believe you could order claw mounts installed at the factory on your Brno Model 21.
I have seen many of these on Brno rifles and they all look exactly the same, and all avoid covering
the CZ trademark on top of the receiver ring, unlike the variety in claw mounts installed by
independent gunsmiths. It really doesn't matter much to me whether or not it was installed
at the factory, but I do believe it could be ordered. Do you have
evidence that this was not the case?

Edited by rpeck (03/08/18 11:34 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
rpeck



Reged: 06/12/13
Posts: 435
Loc: Canada
Re: Brno ZG-47 Fullstock [Re: 93x64mm]
      #318759 - 03/08/18 11:18 PM

Quote:


Very unusual safety, never seen one of these; great positioning - just beside your thumb as you hold the rifle!
Is it down for safe?




Down for fire.


Post Extras: Print Post   Remind Me!   Notify Moderator  
DORLEAC
.333 member


Reged: 22/01/12
Posts: 464
Loc: Perpignan, France
Re: Brno ZG-47 Fullstock [Re: rpeck]
      #318765 - 04/08/18 04:41 AM

I agree with justcurious.
The Hensoldt scope has been fitted in Germany, perhaps by Gustav Genschow & Co.
Claw mounts treatment is typical of German trade.
I have seen and sold a lot of BRNO 21/22 and the factory scoped ones usually bear a Zeiss Jena glass on special mounts of the same kind found later on the ZKK rifles.
However a well done German claw mount is a nice addition on such a fine rifle.

DORLEAC
www.dorleac-dorleac.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
xausa
.400 member


Reged: 07/03/07
Posts: 2037
Loc: Tennessee, USA
Re: Brno ZG-47 Fullstock [Re: DORLEAC]
      #318769 - 04/08/18 08:18 AM

The only Brno 21 I have seen with a mount I thought was factory installed used an SS double claw mount which was made in Czechoslovakia during World War II.

Post Extras: Print Post   Remind Me!   Notify Moderator  
TexasJohn
.300 member


Reged: 06/04/10
Posts: 166
Loc: Texas
Re: Brno ZG-47 Fullstock [Re: xausa]
      #318772 - 04/08/18 09:50 AM

I have one with optics serial numbered to the rifle.

--------------------
John

"In the Texas Oilfield, everything that does not kill me today, gets another chance tomorrow."


Post Extras: Print Post   Remind Me!   Notify Moderator  
DORLEAC
.333 member


Reged: 22/01/12
Posts: 464
Loc: Perpignan, France
Re: Brno ZG-47 Fullstock [Re: xausa]
      #318778 - 04/08/18 09:06 PM

Quote:

The only Brno 21 I have seen with a mount I thought was factory installed used an SS double claw mount which was made in Czechoslovakia during World War II.




If it has been made during WW2 the receiver followed the traditional Mauser pattern with rounded front receiver ring and no scope rails like the 1945 proofed rifle pictured below.







Some years ago I got a factory engraved special order version chambered in .270W and fitted with a Kahles scope on modified Vienna mounts....all is possible !

DORLEAC
www.dorleac-dorleac.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
rpeck



Reged: 06/12/13
Posts: 435
Loc: Canada
Re: Brno ZG-47 Fullstock [Re: DORLEAC]
      #318782 - 05/08/18 12:08 AM

Quote:

I agree with justcurious.
The Hensoldt scope has been fitted in Germany, perhaps by Gustav Genschow & Co.
Claw mounts treatment is typical of German trade.
I have seen and sold a lot of BRNO 21/22 and the factory scoped ones usually bear a Zeiss Jena glass on special mounts of the same kind found later on the ZKK rifles.
However a well done German claw mount is a nice addition on such a fine rifle.

DORLEAC
www.dorleac-dorleac.com




DORLEAC, I accept your opinion. I really don't mind if the scope was mounted outside the factory because it was very well done and that is what counts to me.

I have owned several Brno 21F rifles.

- I had a very early post-war version from 1945 in like new condition. I sold it to a Brno 21F collector who unfortunately will likely never shoot it.

- Another one I bought very cheaply (at a small local gunshow, along with a very cheap 1914 Oberndorf Mauser Model S, see last photo)) only to later discover that the Brno stock was cracked in typical Mauser fashion through the area behind the recoil lug with the crack continuing through the rear of the stock and wrist behind the receiver. I could have easily repaired it with glass bedding but instead I sold it (with full "crack disclosure")...This latter rifle (see 2nd to last photo) was lacking the bolt guide rib and clip loading slot, as do many (but obviously not all) Brno rifles of this vintage.










Edited by rpeck (06/08/18 06:03 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 3954
Loc: Nth QLD Australia
Re: Brno ZG-47 Fullstock [Re: rpeck]
      #318794 - 05/08/18 07:45 AM

Quote:

Quote:


Very unusual safety, never seen one of these; great positioning - just beside your thumb as you hold the rifle!
Is it down for safe?




Down for fire.






Mr Dorleac
Here's a challenge for you, to make a 'proper' bolt shroud/firing pin assembly that can retro fit the current CZ550 actions so that they can be completely stripped down individually like the conventional Mauser.
I'm not sure if this is possible but will require a lot of thought to do so, the CZ's firing pin assembly is pinned together!
Frankly the 'new' CZ shrouds look out of place, these 'old' look ones I believe are very much more appealing to the eye
93x64mm


Post Extras: Print Post   Remind Me!   Notify Moderator  
rpeck



Reged: 06/12/13
Posts: 435
Loc: Canada
Re: Brno ZG-47 Fullstock [Re: 93x64mm]
      #318908 - 08/08/18 11:05 PM



Post Extras: Print Post   Remind Me!   Notify Moderator  
Homer
.416 member


Reged: 07/04/09
Posts: 3081
Loc: Canberra, Australia
Re: Brno ZG-47 Fullstock [Re: rpeck]
      #318924 - 09/08/18 08:01 AM

OMG Mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm mmmmmmmmmmmmmmmmmmmmmmmmmmmmm mmmmmmmmmmmmmmmmmmmmmmmmm Donuts!

Thanks to you all for sharing.

Regards
Homer

--------------------
"Beware the Lolly Pop of Mediocrity,
Lick it Once and You Will Suck Forever"


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 22 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 8212

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved