Home | Ezine | Forums | Links | Contact
NitroExpress.com: Mauser 66

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

Pages: 1
rpeck
.333 member


Reged: 06/12/13
Posts: 250
Loc: Canada
Mauser 66
      #315935 - 02/05/18 09:35 AM

I have two Mauser 66s, an 8x68S rifle with Schmidt & Bender 2.5-10x56 in claw mounts and a fullstock carbine in 30-06 with an LER 2.5x Leupold mounted "Scout Rifle" style. Both are early models from the late 60's. Both have DST and the early model safety. However, note the fluted bolt housing on the rifle.








Post Extras: Print Post   Remind Me!   Notify Moderator  
paradox_
.333 member


Reged: 12/05/07
Posts: 486
Loc: Australia
Re: Mauser 66 [Re: rpeck]
      #315955 - 02/05/18 07:58 PM

The bolt appears to have extensive alteration as well, my guess is an aftermarket alteration for an inexplicable reason

--------------------
Walk softly and carry a big stick


Post Extras: Print Post   Remind Me!   Notify Moderator  
DORLEAC
.333 member


Reged: 22/01/12
Posts: 335
Loc: Perpignan, France
Re: Mauser 66 [Re: paradox_]
      #315958 - 02/05/18 09:06 PM

In my opinion and according to my experience the bolt handle has not been altered.
Both 66' Mauser are of the first type but the stutzen is older and still has a forged bolt handle while the rifle version is equipped with the new welded handle for lower scope mounting (circa end of 1967 start of 1968)
This is difficult to see with the provided photos but the stutzen must also have a shorter rib and neither model has a separate bolt stop.
The Mauser 66 is one of those rifles that were born near perfect and have evolved in the wrong direction of simplification.

DORLEAC
www.dorleac-dorleac.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
rpeck
.333 member


Reged: 06/12/13
Posts: 250
Loc: Canada
Re: Mauser 66 [Re: DORLEAC]
      #315988 - 03/05/18 08:11 AM

Stutzen is dated on barrel July, 1968 (768)and the rifle is dated on barrel December 1968 (1268)

Post Extras: Print Post   Remind Me!   Notify Moderator  
DORLEAC
.333 member


Reged: 22/01/12
Posts: 335
Loc: Perpignan, France
Re: Mauser 66 [Re: rpeck]
      #316004 - 03/05/18 03:44 PM

Quote:

Stutzen is dated on barrel July, 1968 (768)and the rifle is dated on barrel December 1968 (1268)




Proof dates are correct with the variation in production.
You have two fine samples of this model with the stutzen being first production run.

DORLEAC
www.dorleac-dorleac.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 28019
Loc: Barossa Valley, South Australi...
Re: Mauser 66 [Re: DORLEAC]
      #316021 - 03/05/18 09:19 PM

Quote:

The Mauser 66 is one of those rifles that were born near perfect and have evolved in the wrong direction of simplification.




I've always liked the Germanic styling of the Mauser 66. Would have loved one once upon a time. Other than the rifle being over weight, a beautiful rifle.

--------------------
John aka NitroX

...
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
rpeck
.333 member


Reged: 06/12/13
Posts: 250
Loc: Canada
Re: Mauser 66 [Re: NitroX]
      #316031 - 03/05/18 10:32 PM

Quote:

Quote:

The Mauser 66 is one of those rifles that were born near perfect and have evolved in the wrong direction of simplification.




I've always liked the Germanic styling of the Mauser 66. Would have loved one once upon a time. Other than the rifle being over weight, a beautiful rifle.





Weight of the 30-06 Stutzen (including Leupold scope and steel Talley rings) is 7 lb. 10 oz.

Weight of the 8x68S rifle (without S&B scope) is 7 lb. 10 oz.

S&B Scope with mounts is 1 lb. 8 oz. Weights are approximate.

Edited by rpeck (03/05/18 10:43 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 28019
Loc: Barossa Valley, South Australi...
Re: Mauser 66 [Re: rpeck]
      #316032 - 03/05/18 10:43 PM

Quote:

Quote:

Quote:

The Mauser 66 is one of those rifles that were born near perfect and have evolved in the wrong direction of simplification.




I've always liked the Germanic styling of the Mauser 66. Would have loved one once upon a time. Other than the rifle being over weight, a beautiful rifle.





Weight of the 30-06 Stutzen (including Leupold scope and steel Talley rings) is 7 lb. 10 oz.

Weight of the 8x68S rifle (without S&B scope) is 7 lb. 10 oz.

S&B Scope with mounts is 1 lb. 8 oz. Weights are approximate. Other than the rifle being over weight




That isn't too bad. I remember when they were written up in Australia, the total weight including scope for a 8x68S was close to 4.5 kg or close to 10 lbs.

--------------------
John aka NitroX

...
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
rpeck
.333 member


Reged: 06/12/13
Posts: 250
Loc: Canada
Re: Mauser 66 [Re: DORLEAC]
      #316050 - 04/05/18 06:44 AM

Quote:

Quote:

Stutzen is dated on barrel July, 1968 (768)and the rifle is dated on barrel December 1968 (1268)




Proof dates are correct with the variation in production.
You have two fine samples of this model with the stutzen being first production run.

DORLEAC
www.dorleac-dorleac.com




Thank you for your expertise.


Post Extras: Print Post   Remind Me!   Notify Moderator  
markinnz
.224 member


Reged: 12/12/11
Posts: 9
Loc: Auckland New Zealand
Re: Mauser 66 [Re: rpeck]
      #317343 - 17/06/18 08:45 AM

Hi,just seen your 66s posting....the fluted action was on the first pre-production model...looks like the 8-68 is very rare,and perhaps the pre-production action was in inventory,then used.Years ago i came across one in nz...but it actually had mauser 65 stamped on it!.In john speeds mauser book hes got mention of the pre production rifle.....it looks fantastic by the way! cheers Mark

Post Extras: Print Post   Remind Me!   Notify Moderator  
rpeck
.333 member


Reged: 06/12/13
Posts: 250
Loc: Canada
Re: Mauser 66 [Re: markinnz]
      #318379 - 24/07/18 12:17 AM

Quote:

Hi,just seen your 66s posting....the fluted action was on the first pre-production model...looks like the 8-68 is very rare,and perhaps the pre-production action was in inventory,then used.Years ago i came across one in nz...but it actually had mauser 65 stamped on it!.In john speeds mauser book hes got mention of the pre production rifle.....it looks fantastic by the way! cheers Mark





This is the first I have heard of a pre-production fluted receiver. I have never seen another one.Very interesting information. Thanks. However, although I do see Jon Speed's mention of the pre-production rifle, I see no mention of a "fluted" action. How do we know the fluted action is pre-production?

My 8-68 rifle has three "serial" numbers stamped on it.

- On the left side of the barrel between two German proof marks is stamped: 1268 (December 1968, I assume).
- On the left side of the front receiver ring (actually an extension of the barrel) is one proof mark and the number: G10106
- On the right side of the rear reciever (sliding fluted section)is the number: DBP 1205 423

Do any of these other "serial numbers" mean anything to you?

Edited by rpeck (24/07/18 02:57 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 47 anonymous users are browsing this forum.

Moderator:  NitroX 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 1117

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved