Home | Ezine | Forums | Links | Contact
NitroExpress.com: Red or black pad on a ZKK600???

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

Pages: 1 | 2 | >> (show all)
Rino
.300 member


Reged: 13/01/07
Posts: 101
Loc: Norway/South-Africa
Red or black pad on a ZKK600???
      #316328 - 13/05/18 10:23 AM

Gentlemen.
The last year I have spent some time customising a ZKK 600 and it's time to fit a recoil pad on the stock. But I'm having a hard time to decide on if to use a red rubber pad or make a black leather one.

I f##k up every time I post pics here so I'm sorry to say that I can't show you pictures of the stock. Let's just say that it's kinda classic looking with decent wood, and both ebony foreend tip and grip cap.

Your opinion please?

--------------------
Alf Rino Hals


Post Extras: Print Post   Remind Me!   Notify Moderator  
eagle27
.400 member


Reged: 24/01/09
Posts: 1108
Loc: Nelson, New Zealand
Re: Red or black pad on a ZKK600??? [Re: Rino]
      #316330 - 13/05/18 11:19 AM

I had a black Pachmayr on my ZKK600 which had some really nice wood, photo below. Was the skeet model pad with a black plastic insert at the top to prevent catching on clothes when the gun was mounted. The black pad set off the wood nicely which had a reddish orange tinge where I don't think a red pad would have suited so well.



Post Extras: Print Post   Remind Me!   Notify Moderator  
Rule303
.416 member


Reged: 05/07/09
Posts: 4896
Loc: Woodford Qld
Re: Red or black pad on a ZKK600??? [Re: eagle27]
      #316333 - 13/05/18 12:30 PM

I prefer the red but either will look good.

Edited by Rule303 (13/05/18 12:31 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rockdoc
.400 member


Reged: 07/12/06
Posts: 1212
Loc: NSW, Australia
Re: Red or black pad on a ZKK600??? [Re: Rule303]
      #316337 - 13/05/18 03:19 PM

Red or leather covered.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Viking338
.333 member


Reged: 11/08/11
Posts: 479
Loc: Queensland Australia
Re: Red or black pad on a ZKK600??? [Re: Rockdoc]
      #316344 - 13/05/18 09:49 PM

I have always preferred red, just seems a bit more classic/classy.

Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26413
Loc: Beautiful British Columbia, Ca...
Re: Red or black pad on a ZKK600??? [Re: Viking338]
      #316346 - 14/05/18 12:07 AM

Definitely a red pad, but covered with brown leather.


--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
xausa
.400 member


Reged: 07/03/07
Posts: 2037
Loc: Tennessee, USA
Re: Red or black pad on a ZKK600??? [Re: DarylS]
      #316348 - 14/05/18 03:23 AM

Black for a rubber buttplate, like the one illustrated, red for anything thicker.

Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39059
Loc: Barossa Valley, South Australi...
Re: Red or black pad on a ZKK600??? [Re: xausa]
      #316698 - 23/05/18 07:32 AM

If the rifle is made in classic style when restcoked a red or 'orange' buttpad.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rino
.300 member


Reged: 13/01/07
Posts: 101
Loc: Norway/South-Africa
Re: Red or black pad on a ZKK600??? [Re: NitroX]
      #316727 - 23/05/18 11:54 PM

Working on it. But it's taking some time. The weather is too good to spent time indoors these days.

--------------------
Alf Rino Hals


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rino
.300 member


Reged: 13/01/07
Posts: 101
Loc: Norway/South-Africa
Re: Red or black pad on a ZKK600??? [Re: Rino]
      #316992 - 01/06/18 09:06 PM

We had rain the other night and I found time for a few hours in my work shop.

Well gentlemen. This is how it looks as we speak.

It looks kinda ok but I think I will make a black leather pad too, just to be sure.
But not today. And not tomorrow.
I feel for some more sanding now,then a few layers of oil, then some work on the metal, before putting it all together and test shoot the rifle.



--------------------
Alf Rino Hals

Edited by Rino (02/06/18 01:10 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
TexasJohn
.300 member


Reged: 06/04/10
Posts: 166
Loc: Texas
Re: Red or black pad on a ZKK600??? [Re: Rino]
      #316997 - 02/06/18 06:00 AM

You are where you need to be on the pad. Proceed with the finish. Love ZKKs - what is it chambered in?

John

--------------------
John

"In the Texas Oilfield, everything that does not kill me today, gets another chance tomorrow."


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rule303
.416 member


Reged: 05/07/09
Posts: 4896
Loc: Woodford Qld
Re: Red or black pad on a ZKK600??? [Re: TexasJohn]
      #317001 - 02/06/18 09:39 AM

Quote:

You are where you need to be on the pad. Proceed with the finish. Love ZKKs - what is it chambered in?

John




I agree.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Viking338
.333 member


Reged: 11/08/11
Posts: 479
Loc: Queensland Australia
Re: Red or black pad on a ZKK600??? [Re: Rule303]
      #317005 - 02/06/18 05:53 PM

Yes once the oil goes on it will enhance the look of the pad, but of course beauty is in the eye of the beholder. I am biased of course, I think red just looks classy

Post Extras: Print Post   Remind Me!   Notify Moderator  
Rino
.300 member


Reged: 13/01/07
Posts: 101
Loc: Norway/South-Africa
Re: Red or black pad on a ZKK600??? [Re: Viking338]
      #317014 - 03/06/18 10:04 AM

Thanks for taking time to share your opinions guys.

John. This rifle is chambered in the good old and very versatile 30-06. For me a classic cartridge I just love.

--------------------
Alf Rino Hals


Post Extras: Print Post   Remind Me!   Notify Moderator  
Sarg
.400 member


Reged: 20/01/07
Posts: 1365
Loc: Nil
Re: Red or black pad on a ZKK600??? [Re: Rino]
      #317027 - 03/06/18 09:27 PM

Looking very nice, the Red pad is the go for sure !

I just picked up my .458Win Mag ZKK602 barrel that Im fixing to fit on a ZKK600 action & have a normal sized .458 Brno !

I need a stock for this project, where did you get your stock from ?


Post Extras: Print Post   Remind Me!   Notify Moderator  
TexasJohn
.300 member


Reged: 06/04/10
Posts: 166
Loc: Texas
Re: Red or black pad on a ZKK600??? [Re: Sarg]
      #317036 - 04/06/18 07:27 AM

You must post some more pictures when you finish the stock. '06 is a wonderful caliber - on any continent! One of my "go to" rifles is a ZG47 in '06. Anything with Brno on it interest me!

Thanks for posting.

--------------------
John

"In the Texas Oilfield, everything that does not kill me today, gets another chance tomorrow."


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rino
.300 member


Reged: 13/01/07
Posts: 101
Loc: Norway/South-Africa
Re: Red or black pad on a ZKK600??? [Re: TexasJohn]
      #317044 - 04/06/18 11:30 AM

Gentlemen.
Thank you for your time and your reply. I really appreciate it.

I will try to post a few pics from the start of this project and a few of the progress.

It all started just over a year ago when I felt for something to spend cold winter nights with.
I bought a couple of blanks from Turkey and after some hard thinking about what I wanted I felt brave enough to start.



The blank (the one to left) was cut roughly.



The outside shaping was done with rasps mostly.
Im sorry to say that I didn't think too much about to take pictures during this process, something I regret today.
Anyways, here are a couple of pics of the rough rasped filed and sanded stock ready for the final adjutments and details.



Water was used to show the grain in the wood.

The forearm was cut to what I felt was right and a piece of ebony was mounted and roughly shaped.



This rifle is chambered in 30-06 "only" but to be on the safe side I have mounted steel crossbolts and covered the holes with ebony plugs.




I made a grip cap in ebony too but the only picture I got of it is this one



This is how the rifle looked like at that stage.




Working on this made me a little curious of how it will look like so I had to stain the stock with water again to show some colors.




The last progress with rhe pad you have already seen.
Now I'll have to do some more minor adjustments and sanding before the first oil.
The metal will be given some care as well,but that's a story I have to come back to later.

Rino.

--------------------
Alf Rino Hals

Edited by Rino (04/06/18 11:34 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Sarg
.400 member


Reged: 20/01/07
Posts: 1365
Loc: Nil
Re: Red or black pad on a ZKK600??? [Re: Rino]
      #317047 - 04/06/18 12:28 PM

You did a truly great job on the stock, but I can't do that myself, do you still have the old stock ?

I may have to get one made up to, if I cant find a take off stock .


Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 3954
Loc: Nth QLD Australia
Re: Red or black pad on a ZKK600??? [Re: Sarg]
      #317069 - 05/06/18 07:33 AM

That is great work Rino - beautiful choice of timber by the way!
Keep us posted on your progress please.
93x64mm


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rule303
.416 member


Reged: 05/07/09
Posts: 4896
Loc: Woodford Qld
Re: Red or black pad on a ZKK600??? [Re: 93x64mm]
      #317071 - 05/06/18 07:52 AM

Rino, that is a nice bit of stick you have. The grain flow in the fore end is good and hard to better through the wrist.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Rino
.300 member


Reged: 13/01/07
Posts: 101
Loc: Norway/South-Africa
Re: Red or black pad on a ZKK600??? [Re: Rule303]
      #317322 - 16/06/18 10:28 AM

Gentlemen. Thank you for your feedback.

--------------------
Alf Rino Hals


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rino
.300 member


Reged: 13/01/07
Posts: 101
Loc: Norway/South-Africa
Re: Red or black pad on a ZKK600??? [Re: Rino]
      #317324 - 16/06/18 11:21 AM

Sorry. Im still battling with pics but will try once more.

Anyways, finally, after a few very hot weeks the temperature is like normal summer and the temperature allows me to spend time in the hobby room again.
After my last session there I have had some very handy visitors and their impressive work on my stock made the temperature rise again. I'm sorry to say but my words contributed more to global warming than a vulcano erupting. Sorry Texas. Now you know the reason for the heat.





After what seems like most of June I managed to calm down and think clear again.
Thinking back I remembered that I have had a few badass hangovers and I survived every time. Nothing can compare with serious hangovers so some minor damage shouldn't stop my project.
So, after a couple of nights with extra work I'm back where I was. Well almost.
Since I had to waterstain again I took a picture outside for fun, and for my memory album.


I also dropped the steel back in just to take a "before oiling" kinda memory pic.


That's all for tonight.
Now it's time for a beer and watch the sundown... And maybe sunrise.
Cheers !

--------------------
Alf Rino Hals


Post Extras: Print Post   Remind Me!   Notify Moderator  
Sarg
.400 member


Reged: 20/01/07
Posts: 1365
Loc: Nil
Re: Red or black pad on a ZKK600??? [Re: Rino]
      #317340 - 17/06/18 07:30 AM

It looks awesome, pity about the marks, not too bad other than that one on the top side, bugger !

If I could be so forward, would the fore end tip not look a bit nicer square off a little ?

Or is my taste not right, the rest is great ?











Post Extras: Print Post   Remind Me!   Notify Moderator  
thirdbite
.224 member


Reged: 30/04/16
Posts: 43
Loc: kansas, USA
Re: Red or black pad on a ZKK600??? [Re: Sarg]
      #317346 - 17/06/18 10:48 AM

+1 on the current forend tip - definitely not squared off,

Post Extras: Print Post   Remind Me!   Notify Moderator  
LSHopper
.224 member


Reged: 25/02/13
Posts: 47
Loc: AL
Re: Red or black pad on a ZKK600??? [Re: thirdbite]
      #317357 - 18/06/18 02:48 AM

For the love of God, please do not square the tip off!

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1 | 2 | >> (show all)



Extra information
0 registered and 23 anonymous users are browsing this forum.

Moderator:   

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 8065

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved